Genie 360 GS Series User manual

TECH TIPS
Service Call:
Tools Needed:
Model:
Control Cable connectors at the
Platform have been damaged
Side Cutters
Wire Strippers
Crimper Tool (Genie PN# 61794)
Deutsch Plug Connector Kits PN# 105328 and
105329
GS Scissors

Tech Tips Safety Rules
Danger
Failure to obey the instructions and safety rules in
the appropriate Operator's Manual and Service
Manual for your machine will result in death or
serious injury. Many of the hazards identified in
the operator’s manual are also safety hazards
when maintenance and repair procedures are
performed.
Do Not Perform Maintenance Unless:
¾You are trained and qualified to perform
maintenance on this machine.
¾You read, understand and obey:
omanufacturer’s instructions and safety
rules
oemployer’s safety rules and worksite
regulations
oapplicable governmental regulations
¾You have the appropriate tools, lifting
equipment and a suitable workshop.
The information contained in this tech tip is a
supplement to the service manual. Consult the
appropriate service manual of your machine for
safety rules and hazards.

TECH TIPS
Introduction
Important
Read, understand and obey the safety rules and operating
instructions in the appropriate Operator's Manual on your
machine before attempting any maintenance or repair
procedure.
The service manual provides detailed scheduled maintenance
information for the machine owner and user. It also provides
troubleshooting and repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical skills are required to
perform most procedures. However, several procedures
require specialized skills, tools, lifting equipment and a
suitable workshop. In these instances, we strongly
recommend that maintenance and repair be performed at an
authorized Genie dealer service center.
Safety Rules
Danger
Failure to obey the instructions and safety rules in this Tech
Tip and the appropriate Service and Operator's Manual on
your machine will result in death or serious injury.
Many of the hazards identified in the operator’s manual are
also safety hazards when maintenance and repair procedures
are performed.
Do Not Perform Maintenance Unless:
o You are trained and qualified to perform maintenance on this
machine.
o You read, understand and obey:
- manufacturer’s instructions and safety rules
- employer’s safety rules and worksite regulations
- applicable governmental regulations
o You have the appropriate tools, lifting equipment and a
suitable worksho
p
.

TECH TIPS
Use the following Kit PN# 105328 to repair the control cable
on the chassis side.
Step 2
Locate wires from the connectors located under the platform
assembly.
Step 1

TECH TIPS
This illustration shows the terminal locations in the Deutsch
connectors that correspond to the colors of the designated
cables
Step 4
Use the following Kit PN# 105329 to repair the control cable
on the Platform control side.
Step 3