Genie GUV-03 User manual

Getting started....
Hello from the clean Genie team!
Thanks for choosing us. We’re here
to make cleaning simple for you.
We’re not about fuss, so of all our products
are really straightforward and easy to use.
Just follow our quick steps to build it up
and go.
We’d love to stay in touch, so please take
a moment to register your Genie so we
can let you know all about the fun stuff we
do. Find us online at
www.thegenierange.co.uk
for lots more info and tips, or if you get stuck
call our Helpline on 08448 11 22 80.
Now open the page and we’ll have your
Express Steam up and running in minutes.
The
Genie clean team
...it’s easy with Genie
Enjoy!
Safety information Please only use in your home.
Keep instructions for future reference.
When using the steam cleaner, basic safety precautions should always be
observed, including the following:
Warning: The steam cleaner floor head gets very hot during operation.
Warning: Danger of scalding. Avoid contact with steam.
1. Do not leave the appliance unattended when it is switched on. Unplug
the appliance from the electrical socket before carrying out any
maintenance or troubleshooting checks and before you fill/empty the
water tank.
2. The appliance must be kept out of children’s reach and should not be
used by children.
3. In order to ensure safety, the appliance should only be assembled, connected
and operated as set out in the instructions. Only use accessories, which are
recommended by manufacturer.
4. This appliance is not intended for use by persons (including children) with
reduced physical,sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
5. Examine the appliance before use in order to detect signs of damage.
Do not operate if the appliance, its power cord or plug, show any signs
of damage. In order to comply with safety regulations and to avoid hazards,
qualified personnel must carry out repairs of electrical appliances. If repair
is needed contact the clean Genie team.
6. Do not use the steam cleaner if it has been dropped, damaged, left outdoors
or dropped into water.
7. Check the appliance and the cord before each use.
8. Do not unplug by pulling on the cord.
9. Do not handle the plug or steam cleaner with wet hands.
10. After use unplug the appliance from the electrical socket.
11. When the appliance is in operation, the floor head should not be directed
toward humans, animals or plants.
12. Never immerse the appliance in water or other liquid.
13. Only use water in this appliance. De-scaling products, perfume, detergent etc.
should not be used with this appliance, in order to avoid damage.
!
!
Ver
1.0
EEC Statement of Compliance
Manufacturer/EEC importer: Genie hereby on our own responsibility, declare
that the GUV-03 series is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive, EMC: 2004/108/EC Electromagnetic
Compatibility Directive
Disposal
This product should not be disposed of with the house-hold waste.
Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
14. Turn off all controls before unplugging.
15. Store indoors and put away after use to prevent tripping accidents.
16. Using improper voltage may result in damage to the motor and possible
injury to the user. The correct voltage is listed on the rating label.
17. A hazard may occur if the steam cleaner runs over the power cord.
18. Do not use the steam cleaner on leather, wax, polished furniture or
floors, synthetic fabrics, velvet or other delicate steam sensitive materials.
Note: If the power cord is damaged it must be replaced by the manufacturer,
or a similarly qualified person in order to avoid a hazard, or invalidating the
guarantee.
Note: Before performing cleaning or maintenance tasks and after each
use, unplug the appliance from the electrical socket and let it cool down
sufficiently.
Note: Steam must not to be directed towards equipment containing
electrical components, such as the interior of ovens.
Warning: Danger of scalding.
Warning: The appliance heats up during operation, therefore only touch
handle or buttons.Always let the appliance cool down before attaching or
removing accessories
Warning: Never try to modify or change the mains plug of the appliance.
Make sure that the supply voltage corresponds to the voltage marked on
the rating label of the appliance.
!
!
!
Hello!
Express Steam GUV-03
Let’s begin your journey...

Express Steam GUV-03
Handle
Connector tube
Power light (green)
Clean water tank
Floor head
Upper cord wrap
Power cord
Lower cord wrap
On/off button
Clean water tank cap
Funnel
Measuring jug (inc. hard water filter)
Microfibre cleaning pads
Carpet glider
What’s wrong... How to sort me out!
The steamer is not plugged in correctly Push the plug in firmly
Check and replace the fuse or reset the circuit
Want to know how to maintain your steamer
Turn steamer off and refill water tank
Please visit thegenierange.co.uk or call 0844 811 22 80 for advice
If the red light is on, the water tank is empty
My steamer
will not work
properly
Cleaning pad may be saturated with dirt Wash my microfibre cleaning pad
The cleaning
pad will not
pick up dirt
There may be no water in the tank
Check the plug and switch the steamer onThe steamer may not be switched on
Refill clean water tank
!Important: Never
use bleach or fabric
softener when washing
the microfibre
cleaning pads.
Twist and pull
the cap to access
the clean water
tank.
Insert the
handle into the
connector tube
at the top of
your steam
cleaner.
Ensure the
locking tab
locks into place
(you should hear
a click).
Turn on/off
button to on
position (’I’)
to steam.
Placing your
foot on the floor
head, pull handle
back. Clean the
area slowly.
To empty the
tank, press release
button and remove
handle.
Unscrew
tank cap and
remove.
Hold your
steamer over
a sink and empty
clean water
tank.
The microfibre
cleaning pads are
machine washable
at 30°C, using a
mild detergent. They can also
be tumble-dried on
a low heat.Wash
regularly and allow
to dry fully
before use.
Attach cleaning
pad to the floor
head.To secure,
tighten the toggle
on the cleaning
pad.
My steamer
will not produce
steam
Important: Never
leave your steam cleaner
in one place while in use.
!
Important: Test
steam cleaner on a
small inconspicuous
area of hard floor/
carpet before use.
!
Important: Water
tank is empty when
the light is red.
!
Using the funnel
and measuring jug,
fill the clean water
tank, noting MAX
fill water level.
Replace cap.
Note: 1 x 280ml
water tank = 10 mins
steaming time.
For steam
cleaning sealed
hard floor
surfaces...
Important: Ensure unit
has fully cooled before
emptying and storing.
!
Vacuum floors
thoroughly before
using your steam
cleaner.
Vacuum floors
thoroughly before
using your steam
cleaner.
For refreshing
carpets... Attach carpet
glider over a cleaning
pad if refreshing
carpets. Ensure it is
fitted correctly to
the floor head.
11
Either the fuse has blown or circuit in your
home has tripped
It takes
approximately
30 sec. for the
steamer to
heat up.
Once plugged
in, the power
light should be
illuminated
green.
Remove filter from
frame and replace
every 6 months.
Remove the
hard water filter
from the
measuring jug.
2
7
3
4
8
10
11
5
9
6
12
1
13
13
14
3
2
1
6
5
4
7
8
9
10
11
12
13
14
11
33
5
4
2
2
4
2
32