geo-FENNEL FL 60 Maxi Liner User manual

Ref:.. \operat98\instructions 11\775600.qxp 19-01-11 ©York Survey Supply Centre 2010
Tilt Alarm Function
FL60 Maxi Liner is equipped with an automatic TILT function. If level of a laser level is disturbed the instrument will
readjust itself (within the self levelling range). If level is disturbed at large range a height offset will be caused.
This will be avoided by the TILT function.
The instrument will shut off even within the self-levelling range.
Approx. 1 minute after FL60 has been switched on the TILT-Function will be activated automatically.
The red LED indicates that TILT-function is activated. If the level is now disturbed the unit will not read-
just itself (the lines are blinking)
To deactivate TILT-function press TILT-button again.
Technical Data FL60
Automatic levelling range ±3°
Accuracy ±1mm / 10m
Operating Range
without receiver Ø 20m * *depending on surrounding
with receiver Ø 80m * & average light conditions
Fan angle Hz-Lines 130° each
Operating Time / Power Supply 12h iMH
or 24h Alkaline
Temperature Range -10° to +40°C
Visible Laser Diode / Laser Class 635nm / 2M
Receiver FR44
Indication front: LCD-Display
side: LED
Accuracy ± 1mm
Tones 3
Operating Time / Power Supply 100h (1 x 9v)
FL 60 Maxi Liner
Code: 775600
Operating
Instructions

©York Survey Supply Centre 2007Ref:.. \operat98\instructions 11\775600.qxp 19-01-11
Geo Fennel FL60 Maxi Liner Cross Laser
Supplied components:
Power supply, rechargeable batteries, receiver FR55 with clamp and battery, magnetic target, laser
intensive spectacles, container, operators manual.
Safety Instructions:
The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on instrument):
- Setting up heights, horizontal and vertical planes, right angles
- Plumbing points
- Do not stare into beam.
- Do not aim laser beam at persons or animals.
- Use instrument for measuring jobs only.
- Do not open instrument housing.
- Do not remove warning labels or safety instructions.
- Keep instrument away from children.
- Do not use instrument in explosive environment.
Reasons for erroneous measuring results
- Measurements through glass- or plastic windows.
- Dirty laser emitting windows.
- After instrument has been dropped or hit.
- Large fluctuation of temperature.
Laser classification
- The instrument is a laser class 2M laser product according to DI IEC 60825-1:2003-10
- It is allowed to use it without further safety precautions.
- Eye protection is normally secured by aversion responses and the blink reflex.
Functions and Features
- 4 vertical lines at 90° to each other and 2 horizontal lines with 130³ fan angle each
- Plumb up laser cross and plumb down laser beam
- Automatic TILT-function
- Use with receiver FR55
- Automatic shut-off when out of level
- Adjustable 360° circle and tangent screw
- Integrated floor tripod
- 5/8” thread for connection to builders tripod
- Uses both standard iMH battery or 8x AA alkaline batteries