GEONAUTE oxylane ONgo' up 600 User manual

EN ONgo’ up 600
1/11
1
EN


1INTUITIVE GUIDE
Press and hold for the settings menu
Press once for the backlight
Press once to access various modes
Time Mode
► 3
Compass Mode
► 4
Barometer Mode
► 5
Altimeter Mode
► 6
Saved Data Mode
►
7
Stopwatch Mode
►
8
Alarm Mode
►
9
D
C
A
B
ACCESSING VARIOUS MODES
2
How to read the diagrams


screen 1 screen 2
Press C to go from screen 1 to screen 2

2/11
2
3TIME MODE
Changing the time zone and display date
The watch can display 2 different time zones.
They are labelled T1 and T2.
■Press A (for 3 sec) to choose
which time zone to display permanently.
■Press B to display the date.
Setting the time, date, and units (altimeter, barometer and temperature)
■Select which time zone to set, then follow these steps:
Note: The time zones (T1 and T2) must be set separately (time and date).
 Press D to exit the settings mode.











(3 sec)










 








 
































  





(3 sec)
M=metres  FT=feet mbar or inHg °C or °F

3/11
3
EN
4COMPASS MODE
Using the compass
The compass needle points towards 12.00 on
the watch
Note: The number displayed in degrees
(azimuth) includes declination correction
(correction between geographical north
and magnetic north).
Note: The compass feature consumes a great deal of energy. The compass only functions for
about ten seconds at a time before the display shuts off automatically (  ).
 Press A to turn the compass display back on.
 Press and hold A to display the compass for a longer period.
For maximum precision, hold the watch horizontally when using the compass.
Needle direction
Cardinal direction
Azimut
Calibrating the compass
To calibrate, enter a declination value while pointing the compass towards a known cardinal
direction.
Declination values for major cities around the world.
Enter an average number between 2 nearby cities on the list below, or a value for the closest city.
City Declination City Declination
Anchorage 22°E New York 14°W
Atlanta 4°W Oslo 2°W
Mumbai 1°W Paris 2°W
Boston 16°W Rio de Janeiro 21°W
Calgary 18°W San Francisco 15°E
Chicago 3°W Seattle 19°E
Denver 10°W Shanghai 5°W
Jerusalem 3°E Toronto 11°W
London 4°W Vancouver 20°W
Munich 1°E Washington DC 10°W

4/11
4

















 






Press D to exit the calibration menu.
Note: When using your watch for the fi rst time or when reinitialising it, [COMP] mode lets you
calibrate the digital compass directly.
5BAROMETER MODE
There are two display modes:
■Pressure
■History/graph of pressures
 Press B to toggle between the two.
Pressure

 To change the temperature unit displayed (°C or °F), press and
hold A until the display stops blinking.
Note: The barometer displays pressures of 300 mbar to 1100 mbar in
1 mbar increments.
History/graph of pressures
The RECALL screen lets you see pressures recorded over the last
24 hours.
 Press A to move the cursor and to see pressure data from 0
(current time) to 24 (24 hours ago).


(3 sec)
(30 sec)

5/11
5
EN
Calibrating atmospheric pressure at sea level
The watch uses the same sensor to measure altitude and atmospheric pressure. Thus it
cannot determine whether atmospheric pressure is shifting due to a change in altitude or a
change in weather condition.
You will need to calibrate the barometer or altimeter.
 Press and hold D until [SET CURRENT WEATHER] appears on the screen. The weather
symbol will begin to blink.
 Press A(+) or B() to increase or decrease the value displayed based on current weather
conditions.






 Press C. The value for the sea level pressure will blink.
 Press A(+) or B() to increase or decrease the value displayed based on, for example,
offi cial weather forecasts.
 Press D to exit the settings mode. If calibration is not performed after 23 minutes, the
screen will stop blinking and return to barometer mode.
Temperature
Your body temperature may affect the value displayed by the watch. To obtain a
more precise measurement of the external temperature, place the watch on a
roomtemperature surface and wait 10 minutes.
 To change the temperature unit displayed (°C or °F), press and hold A (for 3 sec).
Weather forecast
The icons displayed indicate local weather trends for the next few hours.
Sunny
Weather forecast icon
Cloudy RainySunny with periods
of clouds
The watch's forecasts are only an approximation. If you are planning a major
hazardous outing (e.g., at sea or in the mountains), verify the watch's forecast by
contacting your local weather station. Weather conditions can change rapidly at sea
and in the mountains, creating lifethreatening risks. Use extreme caution.

6/11
6
Note: The watch's weather forecasts are based on barometric measurements and are
estimated for the next 6 hours. They will not be reliable unless the barometer has
been working properly for at least 12 hours.
6ALTIMETER MODE
In this mode, the watch measures and displays instantaneous altitude.
Altitude is shown in metres (M) or feet (FT).
Instantaneous
(ascending or
descending)
speed
Instantaneous
altitude
Instantaneous altitude
Altitude recorded at a
specifi c time
(from 0 HR to 24 HR)
 Press A to scroll
through the
saved values
Time Altitude recording time
■0 HR = current time
■24 HR = recording from 24 hrs ago




Note: The sensor is accurate to 1 metre (or 1 foot) and takes measurements between 700
m (2296 ft) and +9,000 m (+29,520 ft). Changes in weather, even imperceptible ones,
can affect the value displayed (1 mbar difference in pressure equals about 8 m in
gradient). You will need to recalibrate the altimeter regularly.
Starting an activity



(3 sec)
Instantaneous (ascending or
descending) speed
Positive (ASC) or
negative (DSC) total
Instantaneous altitude
Stopwatch
Stopping an activity
Note: Saved data can be accessed
in [LOG DATA] mode.



(3 sec)

7/11
7
EN
Calibrating altitude
 Press and hold D until [SET HOLD] stops blinking and [CURRENT] starts blinking.
 Press C to confi rm the local altitude setting.
 Press A(+) to increase or B() to decrease the value.
 Once the altitude is set, press C to return to the main altimeter settings.











  
Follow the same steps for the 3 preprogrammable altitudes: LOCAL 1, 2 and 3.
■These 3 values let you enter known altitudes of notable places that you may encounter
during your excursion. You can use this to toggle to a reference altitude and improve the
accuracy of the watch's measurements.
Caution: If you exit the settings mode by pressing D
for one of the local altitudes, this altitude
will be recorded by default.
If no buttons are pressed for 23 minutes, the display will return to the home screen
automatically.
Setting and activating the altitude alarm
Set a maximum altitude. If you climb above this altitude, an alarm will sound.


















  






 
Setting Altitude Alarm Alarm on
(3 sec)
(3 sec)

8/11
8
7SAVED DATA MODE
In this mode, you can view data saved in Altimeter Mode.
Altitude data are displayed on 5 separate screens:
■Positive (ASC) and negative (DSC) totals.
■Average ascending and descending speeds (AVG.RATE).
■Maximum (MAX) and minimum (MIN) altitude.
■Recording time (TOTAL).
 To view saved data, press A to scroll through the recording numbers (e.g., LOG DATA 1)
until you see the desired recording.


 









 
 

 
 






 Press B to view details for the 5 screens.
 To delete saved data, press and hold D. The message [CLEAR HOLD] will appear,
indicating that data are about to be deleted.
 Press and hold D to delete all data [CLEAR ALL HOLD]. The screen will display 4 dots ....
Note: You can save up to 10 recordings.
8STOPWATCH MODE
In this mode, a stopwatch can be used to store up to 50 split times.
The stopwatch is accurate to 1/100 sec up to 1 hour (displaying minutes/seconds/hundredths
of a second) and to 1 second up to 24 hours (displaying hours/minutes/seconds).
When the user takes a split time, the display will stop for 6 seconds to allow the time to be
read.

9/11
9
EN
Using the stopwatch
Split time number (LAP)
Time elapsed since last LAP
Total time for this LAP
LAP
 To start the stopwatch, press A.
 To pause or stop the stopwatch, press A.
 To take a split time, press B.
 To reset the stopwatch to 0, press and hold B for 3 sec.
Viewing times
 Press D when the stopwatch is stopped.
LAP 01 to
LAP xx

 



  
 


 

Best time
&
LAP number
Average
LAP time
9ALARM/SOUND MODE
The watch has 2 daily alarms (AL1 and AL2)
When the alarm goes off, the watch will beep for about 20 seconds. Press any button to turn
off the alarm.
Viewing the alarm and activating touch sounds




Alarm
touch sounds off touch
sounds on
Alarm indicator
ON/OFF button
Alarm

10/11
10
Setting the alarm














Setting the sound


ON = alarm on
OFF = alarm off
Alarm indicator
10
Information
Limited Warranty
OXYLANE guarantees the original buyer that this watch is free of defects due to materials or
manufacture for two years starting from the date of purchase. Please ensure that you keep
the invoice as proof of purchase.
■The warranty does not cover damage resulting from misuse, from a failure to respect the
precautions for use, from accidents, from improper maintenance or from commercial use
of the product.
■The warranty does not cover damage resulting from repairs carried out by persons not
authorised by OXYLANE.
■The warranties herein expressly supersede all other warranties, including the implicit
warranty of fair marketable quality and/or fi tness for purpose. Under no circumstances will
OXYLANE be held liable for any damage, whether direct or indirect, general or specifi c,
caused by or related to the use of this instruction manual or the products it describes.
■During the warranty period, the item will either be repaired free of charge by an authorised
repair service or replaced free of charge (depending on the distributor).
■The warranty does not cover batteries or cracked or broken screens showing visible signs
of impacts.
(3 sec)

11/11
OXYLANE
4 Boulevard de Mons – BP 299
59665 Villeneuve d’Ascq cedex – France
11
EN
Precautions for Use
Batteries and Recycling


To change the battery, visit the store where you purchased your product. If you
change the battery yourself, you may damage the seal, affect the watch's
watertightness, and void your warranty. Battery life is affected by how long the
watch has been at the store and how you use the product.
The product and batteries must be recycled at a collection point at end of
life.
Contact
www.geonaute.com