Geosense Geologger Linx User manual

Geosense Quick Guide—GeoLogger Link V1.0
4
5. Close the lid and press hard on
the quick-release latch.
4. Replace the lid on the baery
holder and re-t the baery
holder onto the underside of the
lid.
6. The lid is now closed and fully
sealed.
Geosense Ltd
Nova House. Rougham Industrial Estate. Rougham. Bury St Edmunds. IP30 9ND. UK
Tel: [phone]. Fax: [phone]
emal: [email protected]k. www.geosense.co.uk
Geosense Quick Guide—GeoLogger Link V1.0
1
GeoLogger Linx
FOR FURTHER INFORMATION PLEASE REFER TO THE LINX
LOGGER INSTRUCTION MANUAL WHICH IS PART OF THE
LINX SOFTWARE
The GeoLogger Linx is supplied with:
• Set of batteries (AA or C depending on model)
• A USB containing the software for use on a Windows PC
• A small screwdriver
QUICK GUIDE

Geosense Quick Guide—GeoLogger Link V1.0
2
1. To open the lid on the Linx Logger place a small at ended
screwdriver (3-4mm) into the slot on the le hand side of the lid.
2. Push down hard with the screwdriver. This will open the quick-
release latch
Geosense Quick Guide—GeoLogger Link V1.0
3
3. Remove the baery holder, undo the screw securing the lid and
t the baeries