German Light Product Impression SpotOne User manual

Instruction Manual
from software version 1.19
(Instruction version 1.6)
e-mail: [email protected]
Internet: http://www.glp.de

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 2
Notes:

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 3
Table of contents
1 Description of Device..............................................................................................4
1.1 Safety Instructions............................................................................................5
2 Preparation and Installation...................................................................................6
2.1 Mounting...........................................................................................................6
2.1.1 Mounting on the floor (upright).............................................................7
2.1.1 Mounting in hanging position (Head down)..........................................7
2.1.2 Mounting in sideways position.............................................................8
2.2 Securing the device..........................................................................................8
2.3 Connections......................................................................................................9
2.3.1 Power Supply.......................................................................................9
2.3.2 DMX.....................................................................................................9
3 The Menu Field........................................................................................................9
4
4 Changing Gobos and the Effect wheel................................................................20
4.1 Changing Gobos and the Effect wheel ...........................................................20
4.1.1 General remarks for changing gobos.................................................20
4.1.2 Changing rotating gobos....................................................................21
4.1.3 Changing the effect wheel.................................................................24
5
5 Maintaining and Cleaning the I Im mp pr re es ss si io on n S Sp po ot t o on ne e..........................................26
5.1 Safety regulations...........................................................................................26
5.2 Maintenance Intervals (rule-of-thumb)............................................................26
6 Technical Specifications ......................................................................................27
7 Index.......................................................................................................................28

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 4
1 Description of Device
1. Moving Head
2. Arm with various cooling vents
3. Tilt-lock to secure and lock the
tilt movement
4. Backlight LCD graphical menu
(data entry)
5. Base with various connectors
and Camlock mounting
system
6. DMX- Output (5 Pin)
7. DMX- Output (3 Pin)
8. Micro-fuse 6.3x32mm, T8A
9. Power Switch
10.2x Safety wire points
11.Neutrik Powercon (Mains power
input)
12.Blank panel (primed for Ethernet)
13.DMX- Input (3 Pin)
14.DMX- Input (5 Pin)
Note: Only connect one cable to the
DMX Input / Output at the same time!
Base Side 1
10
6 7 8 9
10
Base Side 2
11 12 13
14
1
2
3
4
5

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 5
1.1 Safety Instructions
The I Im mp pr re es ss si io on n S Sp po ot t o on ne e is an advanced technology product.
To guarantee smooth operation, it is necessary to follow the
following instructions.
The manufacturer of this device will not take responsibility of
damages through any disregard of the information in this user
manual. Warranty claims will also be cancelled in the event of
the system casing being opened.
1. Make sure that before powering up the fixture, the fans and air inlets are
clean and not blocked by anything.
2. Before powering up the fixture, ensure that the moving head part of the
fixture can rotate unhindered through its full range of movement.
3. A safety distance of at least 0.5 m to any easily flammable material (e.g.
decoration material) must be adhered to.
4. Attention! Don’t touch the device during operation. Parts of the fixture can
become hot and can cause injuries and / or damages.
5. Use only one DMX Input / Output at the same time.
6. Never look directly into the beam of light or one of the LEDs. Never use
optical apertures with a distance less than 0.5 m to observe the beam of
light. LED Class 2M. Not following these precautions can result in serious
injury to your eyes and in particular, your retina.
Attention:
LED Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Avoid direct radiation to your eyes!
7. To ensure proper operation, you must also follow the installation guide
described in chapter 2 of this manual. Operating the I Im mp pr re es ss si io on n S Sp po ot t o on ne e
without suitable mounting devices can increase the risk of an accident.
8. The I Im mp pr re es ss si io on n S Sp po ot t o on ne efeatures a unique small and lightweight design
with no specific carrying handles. Care needs to be shown when handling
the fixture to ensure that no unnecessary damage should occur. Fragile
areas include the LCD display and cover on one side arm and the front
bezel. Pressure in these areas could result in damages which will not be
covered by the standard warranty.
9. Repair, maintenance and installation work should only be performed by
qualified or GLP certified staff. You need to pay attention to the common

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 6
rules of technology that are not explicitly mentioned in this manual.
10. Use only original spare parts. Any structural modification on the system will
terminate all warranty claims.
11. Please keep this instruction manual for future reference.
2 Preparation and Installation
2.1 Mounting
The I Im mp pr re es ss si io on n S Sp po ot t o on ne eis fully operational whether it hangs or is mounted to
a wall. It can also be operated while standing on the floor. Keep a safety
distance of 0.5 m from any easily inflammable materials (decoration etc.).
Pay attention to the regulations of: BGV C1 (former VBG 70)
and DIN VDE 0711-217.
The installation shall be done by qualified personal only.
For the various mounting positions of the I Im mp pr re es ss si io on n S Sp po ot t o on ne e(standing on
the floor, sideways or hanging) different accessories kits are available. Using
any required kits, along with the standard mounting connectors on the base of
the fixture, will ensure a safe and firm installation.

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 7
2.1.1 Mounting on the floor (upright)
To operate the I Im mp pr re es ss si io on n S Sp po ot t o on ne ein an upright position, please use
the dedicated floor-stand which is shipped with all original fixtures. The
floor stand is mounted to the base of the
fixture using the two Camlock quarter turn
fasteners. Line up and engage the camlock
connectors from the floor stand into the base
of the fixture and turn the two fasteners 90°
to lock them. Do the opposite to release
them again. On both sides you'll find eyelets
to pull though a ratchet strap. This allows
additional bracing of the floor-stand during
upright operation.
2.1.1 Mounting in hanging position (Head down)
To operate the I Im mp pr re es ss si io on n S Sp po ot t o on ne ein a hanging position, two omega
brackets can be mounted directly to the bottom of the base using the
four Camlock connectors.
M10
Gewinde
Camlock
Camlock
Camlock
Eyelet
thread

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 8
2.1.2 Mounting in sideways position
To operate the I Im mp pr re es ss si io on n S Sp po ot t o on ne ein a sideways position, please use
an additional mounting bar, available from GLP or one of their agents.
This mounting bar is fixed via the four camlock quick-release connectors.
Two half-couplers or clamps are then used to hang fixture. This
technique is necessary to cope with the additional torque in this
mounting position. Never use the "Mounting in hanging position"
technique described above to secure the fixture in a sideway position, as
the fixtures base can become damaged, and a secure installation cannot
be assured.
2.2 Securing the device
Regardless of the mounting method of the I Im mp pr re es ss si io on n S Sp po ot t o on ne eyou'll have to
use a secondary safety wire. This safety wire can be attached to the fixture by
threading it through one of the two holes provided on the base of the fixture.
Ensure that the safety wire is securely fastened through the fixture and the
fixtures mounting support. Install a safety wire that can hold at least 10 times
the weight of the fixture.

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 9
2.3 Connections
2.3.1 Power Supply
Autosensing ~100-240 Volt AC, 50-60 Hz, earth contact type plug via
Powercon
Connected load 450 VA (W) <=> T8A (micro-fuse 6.3x32mm)
Disconnect from the mains supply before changing the fuse and
use only the above described micro-fuse type.
2.3.2 DMX
USITT DMX-512 Standard input/output via 3 pin and 5 pin connectors.
3 pole: Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+]
5 pole: Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4/5 n.c.
Ethernet (Artnet II compatible, ACN ready)
Neutrik RJ-45 plug (for Neutrik EtherCon connector with body)
3 The Menu Field
You’ll find the control board on the side of the arm. It allows you to make all necessary
adjustments of the I IM MP PR RE ES SS SI IO ON N S Sp po ot t O On ne e. .With the Menu-key you get into the main menu.
Afterwards you can navigate through the menu with the Touchwheel. Push the Enter-key to
get to the next menu level or to confirm your settings. Select ON/ OFF function settings with
the Touchwheel. Confirm and save with the Enter-key. Push the Back-key to cancel the
entry and go back to the main menu.



Back
-
Enter



Layer 1 Layer 2 Layer 3 Layer 4 Notes
DMX Start
Address Set the DMX start address
Personality
Pan/Tilt Pan/Tilt settings
Pan invert Selects Inverse Pan, on or off
Tilt invert Selects Inverse Tilt, on or off
Feedback Automatic position feedback selection for
pan/tilt movement
DMX Address Set the DMX start address

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 10
Mode Allows selection of the desired DMX Mode
Compressed
Fixture works in "Compressed" mode see
also section 4
Normal Fixture works in "Normal" mode see also
section 4
High- Resolution Fixture works in "High Resolution" mode 
see also section 4
Hold Values
Defines whether the last DMX signal is
stored, or the lamp is switched OFF in case
of signal interruption
Manual Manual control of all system functions
Pan Manual control
Tilt Manual control
Color Manual control
Red Manual control
Green Manual control
Blue Manual control
Shutter Manual control
Dimmer Manual control
Color temp. Manual control
Special Manual control
Movement Manual control
Movement
Speed Manual control
Zoom Manual control
Focus Manual control
Gobo1 Manual control
Gobo 1 rot. Manual control
Gobo 2 Manual control
Gobo 2 rot. Manual control
Effectwheel Manual control
Effectwheel
rot. Manual control
Prism Manual control
Iris Manual control
Display
Adjustments for the Display
Blackout
Sets the display On or Off
Auto-Rotate Display will rotate automatically
Display
invert Display will rotate manual
Brightness Display backlight

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 11
Set Default
Resetting all functions to original values
Status Version
Shows the current software version
Reset Hardware Hardware reset adjust
All Reset all boards
Head Reset only headboard
GI Reset only Gobo & Iris
FZP Reset only Focus, Zoom, Prism
Pan Reset only Pan
Tilt Reset only Tilt
Temperatures
Display all temperatures
LED Info Display the values for the LED´s
Red Current value for red
Green Current value for green
Blue Current value for blue
Error Status
Shows the error status (N/A)
Life time
Shows the life time
DMX Input Shows the current DMX signal per DMX
channel
Pan Instantaneous value for pan
Tilt Instantaneous value for tilt
Color Instantaneous value for color
Red Instantaneous value for red
Green Instantaneous value for green
Blue Instantaneous value for blue
Shutter Instantaneous value for shutter
Dimmer Instantaneous value for dimmer
Colortemp. Instantaneous value for color temp.
Special Instantaneous value for special
Movement Instantaneous value for movement
Movement
Speed Instantaneous value for movement speed
Zoom Instantaneous value for zoom
Focus Instantaneous value for focus
Gobo1 Instantaneous value for gobo1
Gobo 1 rot. Instantaneous value for gobo 1 rot.
Gobo 2 Instantaneous value for gobo 2
Gobo 2 rot. Instantaneous value for gobo 2 rot.
Effectwheel Instantaneous value for effect wheel

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 12
Effectwheel
rot. Instantaneous value for effect wheel rot.
Prisma Instantaneous value for prism
Iris Instantaneous value for iris
Service Adjust
Adjustments for all functions. Use code to
enter calibration. (only for authorized
persons)
Pan
Adjust for pan
Tilt
Adjust for tilt
Gobo1
Adjust for Gobo 1
Gobo 1 rot.
Adjust for Gobo 1 Rotation
Gobo 2
Adjust for Gobo 2
Gobo 2 rot.
Adjust for Gobo 2 Rotation
Effectwheel
Adjust for Effect wheel
Effectwheel
rot.
Adjust for Effect wheel Rotation
Prisma
Adjust for prism
Iris
Adjust for iris
Zoom
Adjust for zoom
Focus
Adjust for focus
Red
Adjust for red
Green
Adjust for green
Blue
Adjust for blue
Testmode
Test mode(N/A)
Diagnose
Diagnose functions (N/A)
Error Log
Shows all errors in lifetime (N/A)

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 13
DMX Channels
Normal
-
Mode 24 DMX
Channels
Channel
Func
tion
Time and Value
DMX
HEX
%
1) PAN
-
coarse
0 .. 540° 0..255 00..FF 0..100
2) PAN
-
fine
High- Pos ... High- Pos +
2,6°(16 Bit) 0..255 00..FF 0..100
3) Tilt
-
coarse
0 .. 280° 0..255 00..FF 0..100
4) Tilt
-
fine
High- Pos … High- Pos +
1,2°(16 Bit) 0..255 00..FF 0..100
5) Color
Colors adjustable via RGB 0..7 00..07 0..2,5
(fixed)
Color 01 - Red 8..15 08..0F 3..5,5
Color 02 - Amber 16..23 10..17 6..8,5
Color 03 – Yellow warm 24..31 18..1F 9..12,5
Color 04 - Yellow 32..39 20..27 13..15,5
Color 05 – Green 40..47 28..2F 16..18,5
Color 06 – Turquoise 48..55 30..37 19..21,5
Color 07 – Cyan 56..63 38..3F 22..24,5
Color 08 - Blue 64..71 40..47 25..27,5
Color 09 - Lavender 72..79 48..4F 28..30,5
Color 10 - Malve 80..87 50..57 31..34,5
Color 11 – Magenta 88..95 58..5F 35..37,5
Color 12 - Pink 96..103 60..67 38..40,5
White - CTO Color temp.
3200K 104..111 68..6F 41..43,5
White Color temp.
5600K 112..119 70..77 44..46,5
White – CTB Color temp.
7200K 120..127 78..7F 47..49,5
Rainbow Effect Stop 128 80 50
Rainbow Effect slow - fast 129..223 81..DF 51..88
6) Red
Color mixing system - Red 0 - 100% 0..255 00..FF 0..100
7) Green
Color mixing system -
Green 0 - 100% 0..255 00..FF 0..100
8) Blue
Color mixing system - Blue 0 - 100% 0..255 00..FF 0..100
9) Shutter
Shutter closed 0..15 00..0F 0..5,5
Strobe effect pause 5s to 1s 144..199 A0..C7 57..77
Strobe effect, slow - fast 1 Hz .. 20 Hz 200..239 C8..EF 78..94
Strobe 25 Hz 25 Hz 240 F0 94,5
Strobe 50 Hz 50 Hz 241 F1 95
Shutter open 242..255 F2..FF 96..100
10) Dimmer
Dimmer 0% - 100% 0..255 0..FF 0..100
11) Color
temp.
N/A
12) Spec
ial
RESET 1
250..253 FA..FC 98..99
RESET 2
254..255 FD..FF 100
13)
Move
ment
No movement
0 0 0
Movement
Size
Phase
PAN 1 0° 01..01
1 90° 02..03
1 180° 04..05
1 270° 06..07
PAN 2 0° 08..09
2 90° 10..11
2 180° 12..13
2 270° 14..15

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 14
PAN 3 0° 16..17
3 90° 18..19
3 180° 20..21
3 270° 22..23
PAN 4 0° 24..25
4 90° 26..27
4 180° 28..29
4 270° 30..31
TILT size / phase see also
PAN 32..63 20..3F 13..25
PAN / TILT size / phase see also
PAN 64..95 40..5F 26..37
PAN / TILT (inverse) size / phase see also
PAN 96..127 60..7F 38..50
Circle size / phase see also
PAN 128..159 80..9F 51..62
Circle (inverse) size / phase see also
PAN 160..191 A0..BF 63..75
Lying eight size / phase see also
PAN 192..223 C0..DF 76..87
Random movement size see also PAN 224..255 E0..FF 88..100
14) Speed
Pan/Tilt relative movement 0..1 00..01 0..0,5
Pan/Tilt
Pan/Tilt slow – fast
Use this channel 14) also
for the speed of the
movements (channel 13).
Pan Min. 540°
Pan Max. 540°
Tilt Min. 280°
Tilt Max. 280°
2..255 02..FF 1..100
15) Zoom
Stepless adjustable Zoom 0 – 100% 0 .. 255 0..FF 0..100
16) Focus
Stepless adjustable Focus 0 – 100% 0 .. 255 0..FF 0..100
17)Gobo1
Gobo 1 (open, fast)
0…15 0..F 0..5,9
(indexed)
Gobo 2 (fast) 16..31 10..1F 6..11,9
Gobo 3 (fast) 32..47 20.. 2F 12..17,9
Gobo 4 (fast) 48..63 30.. 3F 19.. 24,5
Gobo 5 (fast) 64..79 40..4F 25..30,5
Gobo 6 (fast) 80..95 50..5F 31..37,5
Gobo 7 (fast) 96..111 60..6F 38..43,5
Gobo 8 (fast) 112..130 70..82 44..51
Gobo rotation STOP 131 83 52
Gobo rotation, slow-fast,
CW 132..191 84..BF 53..75
Gobo rotation, fast-slow,
CCW 192..252 C0..FD 76..98
Gobo Open 253..255 FE..FF 99..100
18) Gob
o 1
Gobo position 0 ... 540° 0..127 00..7F 0..49
Posi./Rot
Gobo rotation STOP 128..129 80..81 50
Gobo rotation, slow-fast,
CW 130..191 82..BF 51..75
Gobo rotation, fast-slow,
CCW 192..253 C0..FD 76..100
19)Gobo2
Gobo 1 (open, fast)
0…15 0..F 0..5,9
(indexed)
Gobo 2 (fast) 16..31 10..1F 6..11,9
Gobo 3 (fast) 32..47 20.. 2F 12..17,9

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 15
Gobo 4 (fast) 48..63 30.. 3F 19.. 24,5
Gobo 5 (fast) 64..79 40..4F 25..30,5
Gobo 6 (fast) 80..95 50..5F 31..37,5
Gobo 7 (fast) 96..111 60..6F 38..43,5
Gobo 8 (fast) 112..130 70..82 44..51
Gobo rotation STOP 131 83 52
Gobo rotation, slow-fast,
CW 132..191 84..BF 53..75
Gobo rotation, fast-slow,
CCW 192..252 C0..FD 76..98
Gobo Open 253..255 FE..FF 99..100
20) Gobo 2
Gobo position 0 ... 540° 0..127 00..7F 0..49
Posi./Rot
Gobo rotation STOP 128..129 80..81 50
Gobo rotation, slow-fast,
CW 130..191 82..BF 51..75
Gobo rotation, fast-slow,
CCW 192..253 C0..FD 76..100
21) Effect whee
l
swing Stepless swing of the
"Motion Wheel" 0 - 100% 0..255 00..FF 0..100
22) Effect wheel
Rotating slow - fast CW 0..127 00..7F 0..49
Posi./Rot
Rotating fast - slow CCW 128...255
80..FF 50..100
23) Prism
Prism swing out 0..5 00..05 0..2
Prism position 0 ... 540° 6..127 06..7F 0..50
Prism rotation stop 128..129 80..81 50,1
Prism rotation, slow-fast,
CW 130..191 82..BF 51..75
Prism rotation, fast-slow,
CCW 192..253 C0..FD 76..100
24) Iris
Iris open – closed 0..127 00..7F 00..50

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 16
Compress
-
Mode 20 DMX Channels
Channel
Func
tion
Time and Value
DMX
HEX
%
1) PAN
-
coarse
0 .. 540° 0..255 00..FF
0..100
2) PAN
-
fine
High- Pos ... High- Pos +(16
Bit) 0..255 00..FF
0..100
3) Tilt
-
coarse
0 .. 280° 0..255 00..FF
0..100
4) Tilt
-
fine
High- Pos … High- Pos +
(16 Bit) 0..255 00..FF
0..100
5) Color
Colors adjustable via RGB 0..7 00..07 0..2,5
(fixed)
Color 01 - Red 8..15 08..0F 3..5,5
Color 02 - Amber 16..23 10..17 6..8,5
Color 03 – Yellow warm 24..31 18..1F 9..12,5
Color 04 - Yellow 32..39 20..27 13..15,5
Color 05 – Green 40..47 28..2F 16..18,5
Color 06 – Turquoise 48..55 30..37 19..21,5
Color 07 – Cyan 56..63 38..3F 22..24,5
Color 08 - Blue 64..71 40..47 25..27,5
Color 09 - Lavender 72..79 48..4F 28..30,5
Color 10 - Malve 80..87 50..57 31..34,5
Color 11 – Magenta 88..95 58..5F 35..37,5
Color 12 - Pink 96..103 60..67 38..40,5
White - CTO Color temp.
3200K 104..111 68..6F 41..43,5
White Color temp.
5600K 112..119 70..77 44..46,5
White – CTB Color temp.
7200K 120..127 78..7F 47..49,5
Rainbow Effect Stop 128 80 50
Rainbow Effect slow - fast 129..223 81..DF
51..88
6) Red
Color mixing system - Red 0 - 100% 0..255 00..FF
0..100
7) Green
Color mixing system -
Green 0 - 100% 0..255 00..FF
0..100
8) Blue
Color mixing system - Blue 0 - 100% 0..255 00..FF
0..100
9) Shutter
Shutter close 0..15 00..0F 0..5,5
Strobo Effect pause 5s …1s 144..199 90..C7
57..77
Strobe Effect, slow – fast 1 Hz .. 20 Hz 200..239 C8..EF
78..94
Shutter 25 Hz 25 Hz 240 F0 94,5
Shutter 50 Hz 50Hz 241 F1 95
Shutter open 242..249 F2..F9
95,5..96,5
RESET 1
250 FA 97
RESET 2
251 FB 98
Shutter open 252..255 FC..FF
99..100
10) Dimmer
Dimmer 0% - 100% 0..255 0..FF 0..100
11) Zoom
Stepless adjustable Zoom 0 – 100% 0 .. 255 0..FF 0..100
12) Focus
Stepless adjustable Focus 0 – 100% 0 .. 255 0..FF 0..100
13)Gobo1
Gobo 1 (open, fast)
0…15 0..F 0..5,9
(indexed)
Gobo 2 (fast) 16..31 10..1F
6..11,9
Gobo 3 (fast) 32..47 20.. 2F
12..17,9
Gobo 4 (fast) 48..63 30.. 3F
19.. 24,5
Gobo 5 (fast) 64..79 40..4F
25..30,5
Gobo 6 (fast) 80..95 50..5F
31..37,5
Gobo 7 (fast) 96..111 60..6F
38..43,5
Gobo 8 (fast) 112..130 70..82 44..51
Gobo rotation STOP 131 83 52

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 17
Gobo rotation, slow-fast,
CW 132..191 84..BF
53..75
Gobo rotation, fast-slow,
CCW 192..252 C0..FD
76..98
Gobo Open 253..255 FE..FF
99..100
14) Gobo 1
Gobo position 0 ... 540° 0..127 00..7F 0..49
Posi./Rot
Gobo rotation STOP 128..129 80..81 50
Gobo rotation, slow-fast,
CW 130..191 82..BF
51..75
Gobo rotation, fast-slow,
CCW 192..253 C0..FD
76..100
15)Gobo2
Gobo 1 (open, fast)
0…15 0..F 0..5,9
(indexed)
Gobo 2 (fast) 16..31 10..1F
6..11,9
Gobo 3 (fast) 32..47 20.. 2F
12..17,9
Gobo 4 (fast) 48..63 30.. 3F
19.. 24,5
Gobo 5 (fast) 64..79 40..4F
25..30,5
Gobo 6 (fast) 80..95 50..5F
31..37,5
Gobo 7 (fast) 96..111 60..6F
38..43,5
Gobo 8 (fast) 112..130 70..82 44..51
Gobo rotation STOP 131 83 52
Gobo rotation, slow-fast,
CW 132..191 84..BF
53..75
Gobo rotation, fast-slow,
CCW 192..252 C0..FD
76..98
Gobo Open 253..255 FE..FF
99..100
16) Gobo 2
Gobo position 0 ... 540° 0..127 00..7F 0..49
Posi./Rot
Gobo rotation STOP 128..129 80..81 50
Gobo rotation, slow-fast,
CW 130..191 82..BF
51..75
Gobo rotation, fast-slow,
CCW 192..253 C0..FD
76..100
17) Effect wheel
swing Stepless swing of the
"Motion Wheel" 0 - 100% 0..255 00..FF
0..100
18) Effect wheel
Rotating slow - fast CW 0..127 00..7F 0..49
Posi./Rot
Rotating fast - slow CCW 128...255
80..FF
50..100
19) Prism
Prism swing out 0..5 00..05 0..2
Prism position 0 ... 540° 6..127 06..7F 0..50
Prism rotation stop 128..129 80..81 50,1
Prism rotation, slow-fast,
CW 130..191 82..BF
51..75
Prism rotation, fast-slow,
CCW 192..253 C0..FD
76..100
20) Iris
Iris open – closed 0..127 00..7F 00..50

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 18
Hi
gh Resolution (Extended)
-
Mode 31
DMX Channels
Kanal
Funktion
Zeiten und Werte
DMX
HEX
%
1) PAN
-
coarse
0 .. 540° 0..255 00..FF
0..100
2) PAN
-
fine
High- Pos ... High- Pos + (16
Bit) 0..255 00..FF
0..100
3) Tilt
-
coarse
0 .. 280° 0..255 00..FF
0..100
4) Tilt
-
fine
High- Pos … High- Pos + (16
Bit) 0..255 00..FF
0..100
5) Color
Colors adjustable via RGB 0..7 00..07
0..2,5
(fixed)
Color 01 - Red 8..15 08..0F
3..5,5
Color 02 - Amber 16..23 10..17
6..8,5
Color 03 – Yellow warm 24..31 18..1F
9..12,5
Color 04 - Yellow 32..39 20..27
13..15,5
Color 05 – Green 40..47 28..2F
16..18,5
Color 06 – Turquoise 48..55 30..37
19..21,5
Color 07 – Cyan 56..63 38..3F
22..24,5
Color 08 - Blue 64..71 40..47
25..27,5
Color 09 - Lavender 72..79 48..4F
28..30,5
Color 10 - Malve 80..87 50..57
31..34,5
Color 11 – Magenta 88..95 58..5F
35..37,5
Color 12 - Pink 96..103 60..67
38..40,5
White - CTO Color temp.
3200K 104..111
68..6F
41..43,5
White Color temp.
5600K 112..119
70..77
44..46,5
White – CTB Color temp.
7200K 120..127
78..7F
47..49,5
Rainbow Effect Stop 128 80 50
Rainbow Effect slow - fast 129..223
81..DF
51..88
6) Red
-
coarse
Color mixing system – Red 0 - 100% 0..255 00..FF
0..100
7) Red
-
fine
Color mixing system – Red-
low 0..255 00..FF
0..100
8) Green
-
coarse
Color mixing system – Green
0 - 100% 0..255 00..FF
0..100
9) Green
-
fine
Color mixing system –
Green-low 0..255 00..FF
0..100
10) Blue
-
coarse
Color mixing system – Blue 0 - 100% 0..255 00..FF
0..100
11) Blue
-
fine
Color mixing system – Blue-
low 0..255 00..FF
0..100
12) Shutter
Shutter closed 0..14 00..E 0..5
Strobe effect pause 5s to 1s 144..199
A0..C7
57..77
Strobe effect, slow - fast 1 Hz .. 20 Hz 200..239
C8..EF
78..94
Strobe 25 Hz 25 Hz 240 F0 94,5
Strobe 50 Hz 50 Hz 241 F1 95
Shutter open 242..255
F2..FF
96..100
13)Dimmer
-
coarse
Dimmer 0% - 100% 0..255 0..FF 0..100
14) Dimmer
-
fine
Dimmer low 0..255 0..FF 0..100
15) Color temp.
N/A
16) Special
RESET 1
250..253
FA..FC
98..99
RESET 2
254..255
FD..FF
100
17) Zoom
coarse
Stepless adjustable Zoom 0 – 100% 0 .. 255 0..FF 0..100
18) Zoom fine
Zoom low (0% - 100%) 0..255 0..FF 0..100
19) Focus
coarse
Stepless adjustable Focus 0 – 100% 0 .. 255 0..FF 0..100
20) Focus f
ine
Focus low (0% - 100%) 0..255 0..FF 0..100
21)Gobo1
Gobo 1 (open, fast) 0…15 0..F 0..5,9

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 19
(indexed)
Gobo 2 (fast) 16..31 10..1F
6..11,9
Gobo 3 (fast) 32..47 20.. 2F
12..17,9
Gobo 4 (fast) 48..63 30.. 3F
19.. 24,5
Gobo 5 (fast) 64..79 40..4F
25..30,5
Gobo 6 (fast) 80..95 50..5F
31..37,5
Gobo 7 (fast) 96..111 60..6F
38..43,5
Gobo 8 (fast) 112..130
70..82
44..51
Gobo rotation STOP 131 83 52
Gobo rotation, slow-fast, CW 132..191
84..BF
53..75
Gobo rotation, fast-slow,
CCW 192..252
C0..FD
76..98
Gobo Open 253..255
FE..FF
99..100
22) Gobo 1
Gobo position 0 ... 540° 0..127 00..7F
0..49
Posi./Rot
coarse
Gobo rotation STOP 128..129
80..81
50
Gobo rotation, slow-fast, CW 130..191
82..BF
51..75
Gobo rotation, fast-slow,
CCW 192..253
C0..FD
76..100
23) Gobo 1 rot fine
Gobo 1 rot. low (0% - 100%) 0..255 0..FF 0..100
24)Gobo2
Gobo 1 (open, fast)
0…15 0..F 0..5,9
(indexed)
Gobo 2 (fast) 16..31 10..1F
6..11,9
Gobo 3 (fast) 32..47 20.. 2F
12..17,9
Gobo 4 (fast) 48..63 30.. 3F
19.. 24,5
Gobo 5 (fast) 64..79 40..4F
25..30,5
Gobo 6 (fast) 80..95 50..5F
31..37,5
Gobo 7 (fast) 96..111 60..6F
38..43,5
Gobo 8 (fast) 112..130
70..82
44..51
Gobo rotation STOP 131 83 52
Gobo rotation, slow-fast, CW 132..191
84..BF
53..75
Gobo rotation, fast-slow,
CCW 192..252
C0..FD
76..98
Gobo Open 253..255
FE..FF
99..100
25) Gobo 2
Gobo position 0 ... 540° 0..127 00..7F
0..49
Posi./Rot
coarse
Gobo rotation STOP 128..129
80..81
50
Gobo rotation, slow-fast, CW 130..191
82..BF
51..75
Gobo rotation, fast-slow,
CCW 192..253
C0..FD
76..100
26) Gobo 2 rot fine
Gobo 2 rot. Low (0% - 100%) 0..255 0..FF 0..100
27) Effect whe
el
swing Stepless swing of the "Motion
Wheel" 0 - 100% 0..255 00..FF
0..100
28) Effect wheel
Rotating slow - fast CW 0..127 00..7F
0..49
Posi./Rot
Rotating fast - slow CCW 128...255
80..FF
50..100
29
) Prism
Prism swing out 0..5 00..05
0..2
Prism position 0 ... 540° 6..127 06..7F
0..50
Prism rotation stop 128..129
80..81
50,1
Prism rotation, slow-fast, CW 130..191
82..BF
51..75
Prism rotation, fast-slow,
CCW 192..253
C0..FD
76..100
30
) Iris coarse
Iris open – closed 0..127 00..7F
00..50
31
) Ir
is fine
Iris low 0..255 00..FF
00..100
Locking and unlocking the Control Panel
You can lock the control panel by pressing MENU button for 5s. Unlock is the same.

GLP German Light Products GmbH
(Instruction version 1.6) / from software version 1.19 20
4
4 Changing Gobos and the Effect wheel
4.1 Changing Gobos and the Effect wheel
The I Im mp pr re es ss si io on n S Sp po ot t O On ne e i is s equipped both with Aluminum- and Glass gobos
(outside diameter 27 mm, image size 21 mm). When using customized Gobos
like company logos and writing the recommended image size is 18 mm. You
can use either Aluminum (thickness = 0.5 mm) or glass gobos (thickness = 1.1 -
3.0 mm).
There are two gobo wheels with rotating gobos, with all gobos being
interchangeable.
4.1.1 General remarks for changing gobos
All gobos or other optical effects have a dedicated mounting direction.
To prevent undesired damages and to optimize the optical performance
of your gobos, all gobos should be mounted with their reflecting side
towards the LED light source.
a) Aluminum gobos must be mounted with their unpainted side towards
the LED light source, and the black painted side towards the front
lens.
b) Glass gobos must be mounted with their reflecting, or coated side,
towards the LED light source.
To find out which is the coated side of a glass gobo, take a pencil
and place the point gently on the gobo. If you have touched the
coated side, there will be no distance between the pencil tip and its
reflection in the gobo. If you have touched the uncoated side, there
will be a small distance between the pencil tip and its reflection
Attention: Customized gobos like company logos, or those with
writing also need to be placed in the holder with the correct
orientation to ensure that the projected image reads correctly. Place
the side of the gobo which reads correctly towards the LED light
engine to ensure that it projects properly. Remember that the
reflective side of the gobo should also be towards the LED light
source, so please instruct the gobo manufacturer accordingly when
having customized gobos made.
c) Glass Gobos with a structured surface must be mounted with the
structured surface towards the LED light source and the flat side