GGM gastro SCSGH14 User manual

Instruction for
Chocolate Melting
Machine
Thank you for buying our product, in order to ensure safe used, please
read the Instructions before using and keep it for reference.
No. 1 Safety Precautions
The following safety precautions must be followed when using the
product.
1. Please read the relevant instructions carefully before using the
products.
2. Please don’t share the same power and other high-power appliances
to prevent overloading and cause other hazards.
3. Never touch the plate or around while the products is working or just
close because they are very hot, it could result in burn.
4. If you have a child near the machine, please take extra care to use
the product, don’t let children alone and place the product in baby hand
can reach.
5. Don’t allow the product to be used in unattended.
6.Please don’t contact the power line with sharp objects and hot
surfaces, avoiding damaging the power line.
7. Always check the power line and plug if damaged, please stop using
it once there are signs of damage,then looking for professional worker
to repair or replacement.
8. Don’t damage, excessively bend, stretch, twist the power line and put
heavy objects on the power line or nip the power line.
9. After using it, the thermostat knob should be turned to the "0"
position, and then pull the plug from the socket, to avoid the
occurrence of leakage or insulation aging shock.
10. The product should be installed in a dry, clean, well-ventilated
location and placed in level position.
11. In order to ensure safety, the product must be grounded, and install
the leakage switch, ensure personal safety, otherwise shall not be
used.
12. Please pull off the plug and until the product is completely cooled
before moving, check or clean up.
Model
Dimensions(mm)
Volts(V)
Power(w)
SCSGH14
345x285x295
220-240/50HZ
250

13. Don’t insert or unplug the plug with wet hand, avoiding the risk of
electric shock.
No. 2 Note for the first time use
1. Please read the Instructions carefully.
2. Please check if all switches are in off position.
3. Please check all the accessories are complete.
4. Please tear up the protective film on the surface of the product, then
clean the rust oil wipe on surface of the product with a dry cloth.
5. The supply voltage must match the voltage specified on this
machine.
No. 3 Operating Steps
1.Turn on the power switch.
2.Adjust temperature you need.
No. 4 Care and Cleaning
1. Unplug the power cable and ensure that the product is cooled
completely, then cleaning and collection.
2. Cleaning cooking surface with a soft cloth or sponge dampened in a
mild detergent.
3. Please don’t use wire brush, stiff brush or other corrosive liquids to
clean it, avoiding damage the surface coating.
4. Never clean the product by sprinkling water and immersed in water.
No. 5 Special Declaration
1. All the contents of this information have been checked carefully, if
there is any misunderstanding because of printing and content, our
company will reserve the right of final explanations.
2. If there is a technical improvement, we will compiled new
specification into the Instructions, without prior notice. If the
appearance of the product, color changes, please make the object as
the standard.
No. 6 Electrical schematic
S1: Power switch S2: temperature display
HL1: Power indicator light (red, with power switch together)
HL2: Heating element work indicator light (green)
EH1: Heating element