GGM gastro EITC65 Quick start guide

Manual Number: V002 –19.02.2019
EITC65/EITC95
GELATO SHOWCASE USER GUIDE
(OPERATION MANUAL)

1
1.TABLE OF CONTENTS
1.TABLE OF CONTENTS..........................................................................................................................1
2.CONGRATULATIONS AND THANK YOU! .............................................................................................2
3.SYMBOLS IN MANUAL ........................................................................................................................2
4.CONTACT DETAILS &HELP DESK.........................................................................................................4
5.ELECTRICAL CONNECTION NOTICE.....................................................................................................5
6. WARNINGS &SAFETY ........................................................................................................................5
7. LIFTING AND TRANSPORTATION .......................................................................................................7
8. INSTALLATION ...................................................................................................................................8
8.1 BEFORE THE INSTALLATION ........................................................................................................8
8.2 SELECTION OF INSTALLATION PLACE..........................................................................................9
9. STARTING.........................................................................................................................................10
10. USE.................................................................................................................................................21
11. CLEANING......................................................................................................................................21

2
2.CONGRATULATIONS AND THANK YOU!
Congratulations and thank you for acquiring a Gelato Showcase.
If you encounter a problem with machine, please contact your local service technician.
Please familiarize yourself with the machine by taking some time to study this manual. If you
get to know this little ice-cream factory, it has the potential of making good profit.
Notice and no warrantee: These pages are provided as a service and informational purpose
only, and on the assumption that the recipient of the Soft-Serve Freezer and the operator of
the Soft-Serve Freezer is competent to perform the required tasks, including, but not limited to
operation and/or repair of power equipment, for which the information is provided, and that
person is knowledgeable and mindful of proper safety precautions. Neither the manufacturer,
nor any of their respective employees make any claims about the suitability or fitness of the
information contained herein which is provided strictly on an "as-is" basis, without any express
or implied warranty, guarantee, assurance of quality, conformity of specifications, reliability,
functionality, or suitability. In no event shall the manufacturer and/or its employees be held
liable, whether in contract or tort, to any party for any direct, indirect, punitive, or consequential
damages, including, but not limited to lost profits and business interruption, arising out of any
errors, typographical or otherwise, inaccuracies, omissions, or delays arising out of or
pertaining to the use, reliance on, or inability to use any type of information, part, or good, even
if notified in advance about the possibility of such action. Information in this manual is subject
to change without notice. All rights reserved.
BEFORE USING THE MACHINE READ CAREFULLY THIS
MANUAL. PAY ATTENTION TO THE SAFETY INSTRUCTIONS.
3.SYMBOLS IN MANUAL
WARNING
When you see this symbol on your freezer or in this manual, be
alert to the potential for personal injury. Follow recommended
precautions and safe operating practices.

3
ELECTRIC DANGER
This symbol indicates the presence of electric shock hazards.
NOTE
It points out significant information for the stuff involved.
PROTECTIONS
This symbol means that operator must use protection against an
implicit risk of accident.
MACHINE OPERATOR
He/She is the person who has no specific expertise and she/he
will operate the freezer.
MAINTENANCE ENGINEER
He/She is a skilled engineer for the operation of the machine
under normal conditions; he/she is able to carry out interventions
on mechanical parts and all adjustments, as well as maintenance
and repairs. He/She is qualified for interventions on electrical and
refrigeration components.

4
4.CONTACT DETAILS & HELP DESK
When calling the manufacturer have the following information ready:
1.Serial Number: Found on body panel
manufacturer
manufacturers address
model
ID number
manufacturer type
power supply voltage
nominal frequency
maximum current
cooling gas type
cooling gas weight
power
GWP
CO2 Equivalent Units
2. A brief description of the problem
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………..

5
5.ELECTRICAL CONNECTION NOTICE
1. Please make sure that the power supply conforms to the electrical data label (Rating Plate).
2. Check the data label (Rating Plate) for the required circuit breaker amperage. Only plug into
an electrical wall socket that complies with the required amperage of the machine.
3. Machine should be installed according to the local authority electrical code/regulations it is
used in, as well as to other work health and safety requirements. If you are not sure, please
contact your local authority for details.
4. This symbol indicates the presence of electric shock hazards. Inside the
enclosures of the machine there are electrical shock hazards, therefore, DO
NOT remove any panels if you are not a qualified technician of an authorized
service provider.
5. WARNING: To avoid risk of injury from electric shock, if you are not a
qualified and duly authorized service technician, do not open the enclosure
panels on the sides and back of the machine.
6. The power supply must be properly grounded to prevent electrical shock. Check with a
qualified installer for compliance.
7. The fuse must be 220-240V, 50 Hz 16 Amp or 380-400V, 50 Hz 16 Amp (Before plugging
in the machine, see metallised label on the back of the machine.)
6. WARNINGS & SAFETY

6
Read and understand all safety messages in this manual. The information provided in this
manual concerns your safety. Read and understand the safety decals on your freezer. To
safeguard both the display unit and the operator, all safety equipment must be kept in good
working order. Take notice of the location of all decals on the freezer and keep the safety
decals in good condition. Check them periodically and replace missing, damaged or illegible
safety decals. The safety decals must remain in place and legible for the life of the freezer.
Keep your Freezer clean and tidy. When it needs repairing, work with an authorized service
agent.
The manufacturer is concerned about the safety of the person/s using the machine. Therefore
please take note and abide by amongst others, the following WARNINGS:
The installation must be completed by a qualified technician, following
the manufacturer's instructions.
Never allow the power cord to come into contact with heat sources or
sharp surfaces. The power cable should not sag over the working
surface.
The power cable should not be folded, twisted or tangled and must
always be kept fully open.
Never place the device or other objects on top of the power cord.
Do NOT move or lift the device while the device is running.
Do NOT damage the parts of the refrigeration cycle.
Always follow local authority food safety and other health codes.
Always follow in-store operating and food hygiene safety and other health
code.
Do not clean the machine with high-pressure water.
Use potable water to clean the parts.
Do NOT use the machine before studying this User Guide. Failure to
follow this instruction may result in equipment damage, poor
performance, health hazards or personal injury.
A potential risk exists if the User Guide instructions and other safety
precautions are not strictly followed.
Do NOT allow anyone to attempt any repairs to the machine, unless the
main power supply to it has been disconnected from the power supply
point.
Never open the panels to reach inside the Freezer body. (Only by
authorized technicians)
Technical maintenance must be done by authorized technicians.

7
Using non-original spare parts can cause the display unit to malfunction
in a way that is hazardous for the operator and persons in the vicinity.
Do not, under any circumstances, modify any part of the display unit
without express authorisation in writing from the manufacturer.
The display unit should only be used by authorized personnel. These
personnel must be one who has read the instructions in full, having
understood the concepts expressed in the publication and, if necessary,
having received the training given by the manufacturer.
7. LIFTING AND TRANSPORTATION
WARNINGS FOR SAFE OPERATION

8
Pay due attention to legally required safety measures.
At work wear suitable clothing. Do not wear ties, jeweler’s chains or belts,
which could get caught in the machine.
Do not shift or dislocate the safety switches or protective parts.
Make sure that the lifting device is in good condition and that its load
Capacity exceeds the weight of the appliance (refer to the technical
specifications data sheet).
Lift the appliance following the instructions for its use and maintenance,
Pay attention to the handling and handgrip locations. The use of a suitable
lifting device is recommended.
While lifting or moving the appliance do not stand under the machine.
Do not turn the appliance after holding the cables or the water hose has
lifted it.
If you have to attend to any work higher up above the appliance, you
should use a suitable ladder and not the appliance for support.
On reception, check that the delivery is conforming to the order and the user
instructions are included. On delivery of the display unit, check for damage and
missing parts. If you find any damage or missing parts, contact the
manufacturer or local representative. On reception of the goods, report any
non-conformities, missing materials or evident damage immediately to the
manufacturer, note them on the delivery document and send a detailed claim to the shipping
agent's insurance company, complete with photographs.
NOTICE: The manufacturer will not take any responsibility if the users do not follow all the
instructions as described in this User Guide.
8. INSTALLATION
8.1 BEFORE THE INSTALLATION

9
The following must be observed before using the product and installing.
Do not place your product in the area of direct sunlight, heat sources such as stove,
heating pad, oven, cooker, radiant and infrared.
Otherwise, this may cause the performance of your product to fall, become damaged
or unusable.
Your product is set to 220 - 240 V 50 Hz city electricity. Using a different voltage may
cause the cooler to become unusable and cause a fire.
Our company is not responsible for any malfunctions or damages that may arise in the
event of usage without grounding.
In the event of a sudden power cut, remove the plug from the outlet. For re-start, wait
20 minutes after the electricity arrives; put the product's plug prize. The high voltage
that occurs when the electricity first comes on can cause damage to your product and
cause fire.
The product you have purchased has been designed and manufactured with the
intention of exposing only open or packed ice cream. Please do not use it for other
purposes.
Your product does not have sterilization effect on microorganisms. Therefore the food
you put in your product must be in accordance with the hygiene requirements.
Otherwise, microorganisms that grow in food can threaten your health.
Do not put any material that should not cool into your product. Do not use your product
to thawing frozen foods.
Fluid leaks from freezing cans that are not properly positioned can cause corrosion in
the metal part of your freezer display cabinet, gas escape in the cooling circuit, or
wrapping or cracking in plastic parts. Together with these hygiene conditions of the
odor to disappear, urea by microorganisms can cause health threat to come to
satisfactory levels.
8.2 SELECTION OF INSTALLATION PLACE
In order for your product to work smoothly, the environment in which the it will work is very
important. Before you install the product, pay attention to the following items.

10
Do not position your product so that it is exposed to open air.
Be careful not to put cardboard, box material etc. in front of the bottom louvres so that
your product can cool well.
Take care to position your product away from sources of heat or heat.
Your product is positioned at a point far from where the air flow is intense.
Do not locate your product where the direct sunlight is going. It will increase the
operating time of the product coming into direct sunlight will increase the energy
consumption of glass.
If your showcase is located on the right, left or front wall or any device, it is
recommended that you leave a clearance of at least 15 cm between the product and
any surfaces or devices that will shut the product down.
Whatever your circumstances, turning off the compressor ventilation of your product
will adversely affect the performance of your device.
Do not place your product on a sloping surface to avoid any falling or tipping problems.
9. STARTING
Before operating the product, clean the product according to the cleaning instructions.
The components on the control panel at the bottom of the product and their working modes
are as follows.

11
Green Key: It provides energy to the device.
Yellow Key: The LED on the device allows the lights to be turned on.
Dixell Digital Thermostat: Electronic multi-purpose thermostat that
adjusts the temperature.
Your product's internal temperature is set in our factory so that you can keep and protect your
food stored in the appliance. You can check the internal temperature of the product from the
digital thermostat display on the control panel. You can also adjust the desired temperature
with this thermostat.
If you run your product at the factory set temperature, you will get the best results both in
terms of performance and energy consumption.
Run your product for at least 3 hours. This ensures homogeneous heat distribution
throughout the device.
The digital thermostat on the product is set in the factory and does not require adjustment.
You can change the digital thermostat as follows. Digital thermostats contain many
parameters. If you think there is a problem with the cooling of your device, please contact the
technical service.
To display and modify target set point; in programming mode it selects a
parameter or confirm an operation. By holding it pressed for 3 sec when max or
min temperature is displayed it will be erased.
(UP) To see the max stored temperature; in programming mode it browses the
parameter codes or increases the displayed value. By holding it pressed for 3s the
fast freezing cycle is started.
(DOWN) To see the min stored temperature; in programming mode it browses the
parameter codes or decreases the displayed value.
(ON/OFF) Switch ON and OFF the instrument
ELECTRIC CONNECTION

12
Electric connection
Warnings for the electric connection
do not use electric or pneumatic screwdrivers on the device terminal board
if the device has been taken from a cold to hot place, humidity could condense inside;
wait about 1 hour before powering it
check that the power supply voltage, mains frequency and electric power fall within the
set limits
disconnect the device power supply before proceeding with any type of maintenance
position the power cables as far away as possible from the signal cables
for repairs and information regarding the device, contact the EVCO sales network
USER INTERFACE
Preliminary notes
Operating statuses:
“on” status (the device is powered and is on; utilities may be on
“stand-by” status (the device is powered but is switched off via software; utilities are off

13
the “off” status: the device is not powered; utilities are off.
Hereafter, if the POF parameter is set to 0, with the word “switch-on” means the passage
from “off” status to “on” status; the word “switch-off” means the passage from “on” status to
“off” status.
If the POF parameter is set to 1, with the word “switch-on” means the passage from “stand-
by” status to “on” status; the word “switch-off” means the passage from “on” status to “stand-
by” status.
When the power is switched back on, the device displays the status that it was in at the time
it was disconnected.
Device switch-on/off
If the POF parameter is set to 0:
1. Connect/disconnect the device power supply. If the POF parameter is set to 1:
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Touch the key for 4 s: the LED will flash, after which it will turn off/on.
The display
If the device is switched on, during normal operation, the display will show the magnitude
established with P5, except during defrost, when the device will show the temperature
established with d6 parameter.
If the device is switched off, the display will be switched off; the LED shall be on.
If the device is in "low consumption" mode, the display will be switched off and the LED
shall be on.
Temperature display as detected by the probes
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Touch the key for 4 s: the display will show the first label available.
3. Touch the or key to select a label.
4. Touch the key.
The following table shows the correspondence between the labels and the temperature
displayed.

14
To exit the procedure:
5. Touch the key or do not operate for 60 s.
6. Touch the key. If the second analog input is absent (that is to say, if the P4
parameter is set to 0), the “Pb2” label shall not be displayed.
Compressor operation hours
To show the compressor operation hours:
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Touch the key for 4 s: the display will show the first label available.
3. Touch the or key to select “CH”.
4. Touch the key.
To exit the procedure:
5. Touch the key or do not operate for 60 s.
6. Touch the key. To cancel the compressor operation hours:
7. From step 3. touch the or key to select “rCH”.
8. Touch the key.
9. Touch the or key within 15 s to set “149”.
10. Touch the key or do not operate for 15 s: the display will show a flashing “- - -”
for 4 s, after which the device will exit the procedure.
Defrost manual activation
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Touch the key for 4 s. If the evaporator probe functions as a defrost probe (that is
to say, if the P4 parameter is set to 1) and when the defrost starts the evaporator
temperature exceeds the value set with the d2 parameter, the defrost shall not be activated.
Keyboard locking/unlocking

15
To lock the keyboard proceed as follows:
1. Make sure no procedure is in progress.
2. Do not operate for 30 s: the display will show the message “Loc” for 1 s and the keybord
shall lock automatically. To unlock the keyboard:
3. Touch a key for 1 s: the display will show the message “UnL” for 1 s.
Setting the working setpoint
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Touch the key: the LED will flash.
3. Touch the or key within 15 s; see also r1 and r2 parameters.
4. Touch the key or do not operate for 15 s: the LED will switch off after which,
the device will exit the procedure. To exit the procedure before the operation is complete:
5. Touch the (any changes will not be saved).
The working setpoint can also be set via SP parameter.
Setting the configuration parameters
To access the procedure:
1. Make sure no procedure is in progress.
2. Touch the key for 4 s: the display will show “PA”.
3. Touch the key.
4. Touch the or key within 15 s to set the value determined with the “PAS”
parameter (the parameter is set at “-19” by default).
5. Touch the or do not operate for 15 s: the display will show “SP”. To select a
parameter:
6. Touch the or key. To set a parameter:
7. Touch the key.
8. Touch the or key within 15 s.
9. Touch the key or do not operate for 15 s. To exit the procedure:
10. Touch the key for 4 s or do not operate for 60 s (any changes will be saved).
After setting the parameters, suspend power supply flow to the device.

16
Manufacturer’s settings
To access the procedure:
1. Make sure no procedure is in progress.
2. Touch the key for 4 s: the display will show “PA”.
3. Touch the key. To restore the manufacturer’s settings:
4. Touch the or key within 15 s to set “149”.
5. Touch the key or do not operate for 15 s: the display will show “dEF”.
6. Touch the key.
7. Touch the or key within 15 s to set “4”.
8. Touch the key or do not operate for 15 s: the display will show a flashing “- - -” for
4 s, after which the device will exit the procedure.
9. Cut the device power supply off.
To store customized settings as manufacturer’s:
10. Set the configuration parameters (with the procedure described in paragraph 4.2).
11. From step 4. touch the or key within 15 s to set “161”.
12. Touch the key or do not operate for 15 s: the display will show “MAP”.
13. Repeat steps 6. 7. 8. and 9. To exit the procedure in advance:
14. Touch the key for 4 s during the procedure (i.e. before setting “4”: Restore will
not be performed)

17
USE OF LEDS
Each LED function is described in the following table.

18
LOCAL ALARMS

19
When the cause of the alarm disappears, the device restores normal operation, except for
the following alarms:
compressor shut down alarm (code “CSd”) which requires the switching off of
the device or the temporary suspension of the power supply
defrost alarm switched off because maximum time has been reached (code
“dFd”) which requires the touching of a key.