Gianni Industries Keyprox Plus User manual

Statement
Features
Keyprox Plus
Access Control System
The system is based on a controller that
supports two readers which can be mounted up to
50 meters away from the controller with a simple
3- w ir e co n ne ct i on . Th e c o nt r o l le r ca n be
configured to operate a single one-entry-and-exit
door or two independent doors.
The controller has a RS-232 connection
allowing single controller systems a simple
means of connecting to a PC provided that the
cable run is less than 30 meters. The controller
also has a RS-485 connection that will support up
to 16 controllers connected in a RS-485 network
to a PC thus allowing the control of up to 32 doors.
In this configuration the PC will require a 311
RS-232/485 Interface/Repeater to interface with
the RS-485 network. The Secure Card readers
are fully potted and suitable for mounting
outdoors. Tampering with these readers will not
impair the systems security.
The security is further enhanced by using the
Secure Card technology which prevents third
party from duplicating cards to operate on the
system. The controller has a 4-way dip switch to
set each unit to a unique address in the range 0-
15.
This address added to the reader identification
(reader A or B) uniquely identifies each reader for
programming and transaction reporting. Access
Parameter settings are used to define access
rights at each of the readers. Programming is
done from a PC using the KeyProx Plus Windows
software.
655-20
Controller
656-20-1
Secure Mini Reader
657-20-1
ANSI-sized Reader
311-30
RS-485 to RS-232
converter
Up to 16 controllers
one controller for 2 doors (one serving as entry
, the other as exit); one controller for 1 door
(serving as both entry and exit)
User friendly software
8 Access control levels
5 Time zones per access level
Up to 2000 users
Full reporting facility
User defined fields
Secure reader technology
Built-in backup/restore/repair facility
The software is required for all programming
of the system, downloading transactions and
printing reports.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Keyprox Plus Ver. C Published on 2011.03.22
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

Gianni supplies all accessories for access control application
including maglock, electric bolt lock, electric strike ,exit button,
power supply, prox cards or fobs.
Keyprox Plus
Access Control System
Application
The KeyProx Plus controller has both a RS-232 and a RS-485 interface.
RS-232 interface a simple connection between the controller and the PC in less than 30 meters. The drawings below show typical
RS-232 connection
AC IN
N L - +
12VDC 0.5A
P.B. NO NC COM
Two Door System
Door
strike 2
Door strike 1
3 core
3 core
2 core
2 core
2 core
2 core
2 core
2 core
2 core
RS-232 to PC
Power supply
Exit 2
Exit 1
Door Sw 2
Door Sw 1
Reader B
Reader A
AC IN
N L - +
12VDC 0.5A
P.B. NO NC COM
Single Door System
Door
strike 1
3 core
2 core
2 core
2 core
3 core
2 core
RS-232 to PC
Reader A
Power supply
Exit 1
Door Sw 1
Reader B (in)
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Keyprox Plus Ver. C Published on 2011.03.22
GIANNI INDUSTRIES, INC.
655-20
controller
(Out)
Button
655-20 Controller
Button Button
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Gianni supplies all accessories for access control application
including maglock, electric bolt lock, electric strike ,exit button,
power supply, prox cards or fobs.
Keyprox Plus
Access Control System
RS-485 must be used where the distance between the controller
and the PC is greater than 30 meters or for installation of
multiple controllers. The PC will require a 311 converter to
interface between RS-232 and RS-485. The drawing below
shows a typical connection of multiple controllers with a 311-30
converter.
Multi-Controller System
Warranty
AC IN
N L - +
12VDC 0.5A
P.B. NO NC COM
Door strike 1
3 core
2 core
2 core
2 core
3 core
2 core
Controller
Address 15
Reader 15 A
Alarm or trigger output
Exit 1
Button
Door Sw 1
Reader 15 B
AC IN
N L - +
12VDC 0.5A
P.B. NO NC COM
Door strike 1
3 core
2 core
2 core
2 core
3 core
2 core
Controller
Address 0
311: RS-232/485
interface
Reader 0A
Power supply
Power supply
Alarm or trigger output
Exit 1
Button
Door Sw 1
Reader 0B
Total Cable Length Max. 1000 meters
Maximum of 16 Controllers
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Keyprox Plus Ver. C Published on 2011.03.22
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw