Giant RideControl Plus User manual

RideControl Plus
Quick Start Guide

Content
Specification
The complete RideControl Plus set includes:
Category
Physical Size
Weight
Radio Frequency
Transmission Range
Operating Temperature
Water Resistance
Battery
Battery Life Time
Description
60*38*15mm (L*W*H)
24g
(incl. CR2032 battery)
2.4GHz ANT™
3m
-10℃~60℃
1m
CR2032 Lithium
Battery
Up to 100 Hours of
Operating

Riding Time E-bike Battery %
Heart Rate E-bike Battery Bar
Cadence Remaining Range
Power ODO
Distance Auto Mode
Data field icon Description
Button Function (more detail
in Getting started section)
12 3
Previous Data Field
Clear current data
1•
•
Wake up
Enter setting mode
2•
Next Data Field
3•

How to Setup
Please insert CR2032 battery to computer
before activate RideControl Plus.
•
•
•
•
•
•
•
Press central button.
Turn on E-bike power, and wake up RideControl Plus
computer.
Recommend: Take E-bike away from other ANT+
signal to avoid RideControl Plus finding other sensor.
Press Reset Button on back side to enter pair mode.
Screen will show “Pair” when RideControl Plus finds
E-bike.
Auto search: don’t need to pair with same E-bike
next time waking up RideControl Plus.
Wheel circumference setting is not necessary when
pairing with E-bike system. When using a speed
sensor on regular bike, please set wheel
circumference.
To enter setting mode, it’s not necessary to connect
to E-bike, you can operate solely with RideControl
Plus.
A. Wake up
B. Pair with your E-bike via ANT+
C. Setting wheel circumference

•
•
•
•
•
•
•
•
Press right button to remaining range/distance/odo
data field.
Press and hold central button for 2 seconds to enter
setting mode.
When seeing “LEN” on upper screen, press and hold
central button for 2 seconds. Screen will show “SEt”.
Press left and right buttons to adjust wheel size.
After setting, press central button to confirm and
computer will remain in setting mode. If not
confirmed by user, system will automatically set and
go back to original data field after 2 seconds.
To enter setting mode, it’s not necessary to connect
to E-bike, you can operate solely with RideControl
Plus.
Press right button to remaining range/distance/odo
data field.
Press and hold central button for 2 seconds to enter
setting mode.
After wheel size setting, when seeing “Unit” on
bottom screen, press and hold central button for 2
seconds. Screen will show “SEt”. Press left and right
buttons to adjust unit.
D. Setting metric/imperial unit

•
•
•
•
•
After setting, press central button to confirm and
computer will remain in setting mode. If not
confirmed by user, system will automatically set and
go back to original data field after 2 seconds.
Upper screen will show L1 to L5 which corresponds
to E-bike assist level.
Upper screen will show “A” when switching to Smart
assist mode. (GIANT E-bike only)
Press and hold left button for 3 seconds.
RideControl Plus will enter Sleep mode 90 seconds
after not receiving signal from E-bike.
How to operate
A. Assist level
B. Clear current riding record
C. Sleep

Giant warrants for the original owner of the
RideControl Plus (incl. mounting kit) to be free from
defects in material and workmanship for the period
of two years from the date of purchase. Please note:
batteries are excluded from warranties.
This warranty applies only when the RideControl
Plus is purchased new from an Authorized Giant
Dealer.
Warranty