Gigabyte Gv-r98p256d User manual

GV-R98P256D

Radeon 9800 PROGraphics Accelerator

Rev.102

12MD-R98P256D-102

USER'SMANUAL

中文使用手冊

Upgrade your Life

GV-R98P256D Graphics Accelerator - 2 -

English

may be reproduced or transmitted in any from without the expressed, written permission

of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Due to rapid change in technology, some of the specifications might be out of date before

publication of this booklet.

The author assumes no responsibility for any errors or omissions which may appear in

this document nor does it make a commitment to update the information contained herein.

Please do not remove any labels on VGA card , this may void the warranty of this VGA

card.

June 13, 2003 Taipei, Taiwan

Chapter 1 User's Manual

Table of Content- 3 -

English

Table of Contents

1. INTRODUCTION ................................................................................. 4

1.1. PREFACE .................................................................................................. 4

1.2. KEY FEATURES ........................................................................................ 4

2. HARDWARE INSTALLATION .............................................................. 5

2.1. UNPACKING .............................................................................................. 5

2.2. BOARD LAYOUT ........................................................................................ 6

2.3. HARDWARE INSTALLATION ..................................................................... 7

3. SOFTWARE INSTALLATION .............................................................. 9

3.1. WINDOWS®98 /98SE / WINDOWS®ME / WINDOWS®XP DRIVER

AND UTILITIES INSTALLATION ................................................................ 9

3.1.1. Operating system requirement ......................................................................................... 9

3.1.2. DirectX Installation ......................................................................................................... 10

3.1.3. Driver Installation ........................................................................................................... 12

3.1.4. Utilities on driver CD ...................................................................................................... 15

3.1.5. Taskbar Icon ................................................................................................................... 18

3.1.6. Display Properties pages ............................................................................................... 22

3.2. WINDOWS 2000 DRIVER INSTALLATION .............................................. 30

3.3. BIOS FLASH UTILITY .............................................................................. 30

4. Troubleshooting Tips .........................................................................31

5. Appendix ........................................................................................... 32

GV-R98P256D Graphics Accelerator - 4 -

English

1. INTRODUCTION

1.1. PREFACE

GV-R98P256D features world's first 8-pipeline architecture for twice the rendering power,

256MB of memory to accelerate latest 3D games and new SMARTSHADER™2.1

technology supporting DirectX®9.0 and the latest OpenGL®functionality to give developers

the freedom to create more complicated and realistic visual effects than ever before.

GV-R98P256D supports the new AGP 8X standard, which allows large volumes of texture

and vertex data to be transferred faster from system memory to the chip.

1.2. KEY FEATURES

Powered by RADEON™9800 PRO Visual Processing Unit (VPU)

First to fully support DirectX®9.0

Supports the new AGP 8X standard

First 8-pixel pipeline architecture

All new 256-bit memory interface

256MB DDR II memory accelerates the latest 3D games

First to use pixel shaders to accelerate video

DVI-I and TV-Out connector supported

Hardware Installation- 5 -

English

2. HARDWARE INSTALLATION

2.1. UNPACKING

The GV-R98P256D package contains the following:

zThe GV-R98P256D graphics accelerator

zThis USER'S MANUAL

zThe GV-R98P256D Driver CD x 1

zPower DVD XP CD x 1

zGame CD x 5

zOne cable support S-video and AV-Output ; DVI-I to D-Sub connector

WARNING!

Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against

damage from static electricity, you should follow some precautions whenever you work on

your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have one,

touch both of your hands to a safely grounded object or to a metal object, such as the

power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator should

be wearing an anti-static wristband, grounded at the same point as the anti-static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage to

your card. Be sure there are no shipping and handling damages on the card before proceeding.

0DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON THE CARD.

0In order to ensure your graphics card working correctly, please use official Gigabyte

BIOS only. Use none official gigabyte BIOS might cause problem on the graphics card.

GV-R98P256D Graphics Accelerator - 6 -

English

2.2. BOARD LAYOUT

GV-R98P256D (256MB DDR II)

TV-out

VGA Monitor

Connector

(15pin)

DVI Connector

TV-Out

VGA Monitor

Connector

(15pin)

DVI Connector

AV Output

NTSC / PAL TV

Projector

S-VideoOutput

DVI Output

Digital LCD Monitor

DVI-I to D-sub

Connector

VGA Output

Analog LCD Monitor

Analog LCD Monitor Analog Monitor

VGA Output

Hardware Installation- 7 -

English

2.3. HARDWARE INSTALLATION

Installing Your Graphics card.

Now that you have prepared your computer, you are ready to install your graphics

accelerator card.

To install your graphics accelerator card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help

in removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to

disable it on the motherboard. For more

information, see you computer

documentation.

GV-R98P256D Graphics Accelerator - 8 -

English

4. Locate the AGP slot. If necessary, remove

the metal cover from this slot; then align

your Graphics card with the AGP slot, and

press it in firmly until the card is fully eated.

AGP SlotGV-R98P256D Graphics Card

5. Replace the screw to fasten the card in

place, and replace the computer cover.

6. Plug the display cable into your card; then

turn on the computer and monitor. If your

Graphics card came with a DVI connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

You are now ready to proceed with the installation of the Graphics card driver. For detailed

instructions, select your operating system from the list below.

After installation, please connect the power cable to your

GV-R98P256D graphics card, or system will not boot.

To Flat Panel Display

To TV or VCR

To VGA Monitor

Software Installation- 9 -

English

3. SOFTWARE INSTALLATION

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

3.1. WINDOWS®98 /98SE / WINDOWS®ME / WINDOWS®XP DRIVER

AND UTILITIES INSTALLATION

The installation of Win®98/98SE / WINDOWS®2000 / Win®ME / Win®XP drivers is very

simple. When you insert the driver CD into your CD-ROM drive, you can see the AUTORUN

window (if it does not show up, run "D:\setup.exe"). Then you can follow guides to setup

your GV-R98P256D driver (Please follow the subsection 3.1.3 "Step By Step Installation"

to install the driver for your GV-R98P256D graphics accelerator.

3.1.1. Operating system requirement

zIf your OS is Microsoft Windows, when loading the GV-R98P256D drivers for the

system, please make sure your system (Windows 98/98SE, Windows 2000 or

Windows ME) has installed DirectX 9 or later.

zIf you install the GV-R98P256D drivers for the motherboard, which consist of SIS,

ALI or VIA chipsets, please install the appropriate Driver program for that

motherboard. Or please contact your motherboard nearest dealer for M/B Driver.

GV-R98P256D Graphics Accelerator - 10 -

English

3.1.2. DirectX Installation

Install Microsoft DirectX 9(or later version) to enable 3D hardware acceleration support

for Windows®98 / 98SE / Windows®2000 / Windows®ME or Windows®XP to achieve

better 3D performence.

0Note: For software MPEG support in Windows®98/ 98SE/ Windows®2000 / Windows®

ME or Windows®XP, you must install DirectX 9(or later version) first.

2.Click "Next" icon.

3.Click "Next" icon.

1. Install DirectX Driver:

Click "Install DirectX 9" Item.

Table of contents

Gigabyte GV-R98P256D User manual

Popular Video Card manuals by other brands