GIGAMEDIA GGM CCKITAHD User manual

EN
Quick Guide KIT AHD
GGM CCKITAHD

2
EN
Step 1 - Overview
Step 2 - Schematic Diagram
Step 3 - Step by Step configuration with Wizard
Wizard .................................................................................. 4
HDD Management .............................................................. 5
Record Schedule ................................................................. 6
General System Configuration ........................................... 7
Network .............................................................................. 8
Email Configuration ........................................................... 9
DDNS Configuration ........................................................... 10
Image Size .......................................................................... 11
Substream .......................................................................... 12
Playback ............................................................................. 13
Step 4 - Remote Access with WEB Browser & SmartPhone
Web Browser (Internet Explorer) ....................................... 14
Login ................................................................................... 15
Mobile Phone Access .......................................................... 16

www.gigamedia.net 3
EN
USER MANUAL kit AHD
GGMCCKITAHD
Remote Power Supply User Manual
CD x2 cameras AHD
USB Mouse
REAR VIEW
ACCESSORIES
FRONT VIEW
x2 18m Coax Cable
Step 1 - Overview
Check your AHD DVR package it is included all the accessories
Physical overview of the Digital Video Recorder

4
EN
220V
12V
12V
HDMI
OUTPUT
OR VGA
OUTPUT
ROUTER
ALARM
POWER SUPPLY
USB
ACCESSORIES
CAMERA
CAMERA 12V
12V COAX
COAX
COAX
INTERNET
MONITOR
Step 3: Wizard
Wizard
System Initialization:
please use « Wizard » tool to help you to
configure each step of your new AHD Kit
Step 2: Schematic diagram
NB: After DVR startup is completed, the
startup wizard will be displayed. If you do
not want to make any setting, you may
click “Don’t show this window next time”
to cancel, as shown in Picture. We recom-
mend to follow step by step procedure with
the “Wizard”to configure your new DVR

www.gigamedia.net 5
EN
220V
12V
12V
HDMI
OUTPUT
OR VGA
OUTPUT
ROUTER
ALARM
POWER SUPPLY
USB
ACCESSORIES
CAMERA
CAMERA 12V
12V COAX
COAX
COAX
INTERNET
MONITOR
Main window
STEP BY STEP CONFIGURATION
HDD MANAGEMENT
Format HDD for the first use.
Note: Recording can only be performed when HDD is in “Normal” state.

6
EN
RECORD SCHEDULE
You can set recording time and scheduled recording of DVR. You can select days and
record period following event (Normal Record – Motion Record – Alarm Record)
Camera
Days
Record, Motion Detection or Alarm
in "Parameter" > "Video" > "Record schedule"

www.gigamedia.net 7
EN
GENERAL SYSTEM CONFIGURATION
System Settings
check time, date, language video format: PAL (for Europe)
Menu time format :
Sets duration of a session. After this period unsolicited DVR you need to re-enter
your username:admin and password (blank) Default.

8
EN
NETWORK
Take DHCP as an example. In this mode, the router automatically assigns IP ad-
dress for DVR. After restarting DVR or DHCP server, the IP address obtained by
DVR may be different. As a result, user shall check IP address and port number
for each remote access of DVR. The operation procedure is as follows:
1. Select DHCP, click Save and refresh DVR. Input Client Port and HTTP Port (the two
values must not be the same).
2. Set obtained IP address of DVR and the mapping port. Refer to section 4.2.4.2.
3. Remotely visit DVR by IP address:
http://Public network IP: Web port number (such as 00080)
http:// Intranet IP: Web port number (such as 00080) (Only available in the same LAN)
Universal Plug and Play (UPnP) is a standard that uses Internet and Web protocols to enable devices such as DVR
laptop… to be plugged into a network and automatically know about each other. With UPnP, when a user plugs
a device into the network, the device will configure itself, acquire a TCP/IP address. Don’t forget to ENABLE UPNP
system to configure your DVR easily.
DHCP Function

www.gigamedia.net 9
EN
This step allows you to configure your email address to receive alerts when there
is motion detection or if you want to get the image from the DVR recorder.
At this step it’s not necessary to fill this part. You can find more information how to
configure it in the general manual.
E-MAIL CONFIGURATION

10
EN
DDNS CONFIGURATION
DDNS: After user applies for DDNS service, you could enable
<
DDNS> function
under any one network type mode (Static, DHCP and PPPoE).
And you may remotely visit the NVR through domain name (http://domain name:
Web port No.).
When visiting DVR by using DDNS, user should make sure port and current IP can
be normally connected in public network.
Details settings, including server address, host, user, and password, should be
consistent with NVR local setting.

www.gigamedia.net 11
EN
IMAGE SIZE
Mode: Support 960H and D1. Select a resolution, save and exit main menu. Then
the system will automatically restart to take effect.
Resolution (960H): Support three kinds of picture quality: WD1, WHD1, WCIF.
Resolution (D1): Support three kinds of picture quality: D1, HD1, CIF.
Note: In AHD series, the supported record resolution includes 960H and 720P
FPS > PAL: 1--25f/s;
Bitrate: Bitrate for local storage. User may select in the drop down list.
Audio: Check the box to record channel audio during recording and there will be
audio output during playing record. Un-check the box to disable recording audio
and there will be no audio output during playing the record
Number of images per second
(frame per second) fps
Select size
of the vidéo
Go to “Main Menu” > “Record” > “Mainstream”

12
EN
SUBSTREAM
Useful for remote access with your mobile phone. Substream selection ensure a
smooth playing to adapt the bandwidth.
Video: Substream switch. Select Enable to preview the substream in the client, If
Disable is selected, the client can only choose mainstream preview.
FPS: FPS for network transmission. User may select value in the drop-down list.
Bitrate: Bitrate for network transmission. User may select value in the drop-down list.
Audio: Click √ and audio will play during network transmission.
Synchronous transmission.
Go to “Main Menu” > “Parameter” > “Network” > “Substream”
to enter into the interface

www.gigamedia.net 13
EN
RECORD SEARCH
Channel: Select the channel you want to search.
Type: Select the type the playback record. There are two options, i.e. Normal and Alarm.
Start Time/End Time: Select the specific period of time. The default setting is
from 0:00 to 24:00.
Playback Channel: Click a date and select corresponding channel in Playback
Channel.
Go to “Main Menu” > “Record Search” > “Record Search”

14
EN
Playback: Select the desired year and month and click “Search”. If there are any
records, a yellow corner mark which shows the recording at specific date will
appear at the down-right corner of the date sheet. Select the date checkbox and
select playback channel and click Playback to enter into the interface.
Playback interface: You can use the Playback Control bar to operate the Fast
Forward (X2, X4, X8 and X16), Rewind (X2, X4, X8 and X16), Slow play (1/2, 1/4 and
1/8 speed), Play, Pause/Frame. You can click or drag the volume control bar to
adjust volume.

www.gigamedia.net 15
EN
HOW TO REACH YOU CAMERA WITH YOUR BROWSER WEB (IE 8.0)
Press Login to log in client and remotely
visit DVR.
The default password is blank and
administrator is authorized to mo-
dify the password. Set password as
per introductions of user management
in system setting.
LOGIN
Step 4 - REMOTE ACCESS WITH WEB OR MOBILE PHONE
After ActiveX controls installation, please input user name and password, select
Main Stream or Sub Stream (In general, select main stream for intranet and sub
stream for outer net), and input web port number and select language in the
interface. There is an option for opening all channel preview, select it to open all
live pictures.
IP ADDRESS
OR
DDNS URL

16
EN
1. Download « RXCamLink » App
MOBILE ACCESS
On first use, go to Device
Manager to configure
access to your recorder.
In Device Manager, enter the
name you want to give to your
recorder, IP address or ID
(specify it just above), the client
port is 9000 by default and
login from your DVR (Blank by
default) The channel number
will be updated automatically
Then you will be able to see
your videos to your mobile
phone.
2. Run App
Search for "RXCamLink"
In your favorite Applications Store Flash code for direct link
in your Applications Store
For more information please visit our website
www.gigamedia.net
To download the usermanual in full version please
visit the section usermanual to download.
If you have any questions please contact you reseller.