Gigaset C610ip User manual

Gigaset C610IP Setup Guide
The first step is to plug your base station into power and network. Now press the button and the IP
address will appear on the screen of the handset. Once you have the IP address, type it into your
internet browser. The Default pin is 0000
Click on the Settings tab, and then click on Telephony. Now click Edit for “IP1”. Enter your extension
information (found in your maxotel portal) into these fields like bellow:

Click on Show Advanced Settings. Type the Domain address in and change the Registration
Refresh time to 120 Seconds and click Set and you are done.
Keep in mind that if you are a Hosted PBX customer you will use “pbx.maxo.com.au” as the Sip
Server.