Gill W016 User manual

InstructionManual
Stealth Timer _W016

This watch comes with a 2 year warranty.
For warranty issues please contact your nearest stockist.
Proof of purchase required.

1.0 Introduction
Thank you for purchasing the Stealth Timer. This watch features real time, race countdown
timer, stopwatch and compass modes in addition to many other functions.
Your watch will be supplied in Power Down Mode in order to preserve battery life. To exit,
press and hold any button for 5 seconds.
Please follow these guidelines in order to maximise the lifetime of the Stealth Timer:
- Avoid exposing the watch to extreme conditions over extended periods
- Avoid rough use or sudden impacts
- To ensure water-resistant integrity, we recommend the use of a certified watch repairer
when opening the watch case
- Clean with a soft cloth when needed
- Power down your watch and store in a dry place when not in use for extended periods

MODE
ST P.
ST./LAP/SYNC
Mode Button [M]
- In function modes: Press to enter the next
mode.
- In Clock Mode, press and hold for about
2 seconds to enter the time setting display.
- In any setting display: Press to choose
among different settings
ST./LAP/SYNC. Button [S/L/S]
- In Chronograph Mode: Press to start or
select a lap time.
- In Timer Mode: Press to start or
synchronise.
- In setting displays: Press to increase the
value or hold to increase faster.
- In Alarm Time Mode: Hold to test alarm
sound.
2.0 Buttons Operation Summary
STP. Button [STP]
- In Timer Mode: Press to stop or hold to
reset the timer.
- In Chronograph Mode: Press to stop or
hold to reset the chronograph.
- In Alarm Time Mode: Press to select the
Alarm Time ON/OFF.
Note: The button operations are
summarised as above, for detailed
operating instructions, please continue
reading.
[M] [STP]
[S/L/S]

3.0 Major Function Modes
[M]
[M]
Clock Mode
Section 4
[M] [M]
[M]
[M]
Compass Mode
Section 6
Chronograph Mode
Section 7
Countdown Timer Mode
Section 5
Alarm Mode
Section 8
MODE
ST P.
ST./LAP/SYNC

Day of Week
Real Time
Date
AM/PM Indicator 12hr format only
Clock Mode.
4.0 Clock Mode
Idle 10minsAny button
- To set the time, date, and other settings press and hold the [M] button for about 2 seconds
to enter the setting display.
* In Clock Mode, if the user does not press any button for 10 minutes the screen will go to
Standby Mode.
Clock Display
*Standby Mode
[M] [STP]
[S/L/S]

3.0 Regatta Mode4.1 Clock Mode _ Settings
[M]
Minutes Hours
MonthDay Year
Keytone ON/OFF12/24 Hr format LCD Level
[M]
[M]
[M]
[M][M]
[M][M]
[STP] -
[S/L/S] +
[M]
2 Seconds

5.0 Timer Mode _ Countdown Timer
* Press and hold [STP] button for two second to switch between each value.
Alternatively press and hold [STP]
button continuously to scroll through values.
Countdown Timer Mode
- The Stealth Timer has four pre-set values: 5.4.1.0, 5-Minutes, 3-minutes and 1-minutes
and one user defined value.
[STP]*
2 Seconds
5-Minutes 3-Minutes
User 1-Minutes
[M] [STP]
[S/L/S]
Countdown Timer Mode

7.0 Chronograph Mode5.1 Timer Mode _ Countdown Timer Settings
[M] [STP] -
[S/L/S] +Hours Minutes
Vibrate ON/OFF Seconds
Sync ModeAlert ON/OFF
[M]
[M]
[M]
[M]
[M][M]
[M]
Timer Repeat ON/OFF
[M]
2 Seconds

Multiples of Pre-set Value
- After the pre-set values have been chosen, the countdown can be increased by a multiple
of that value by pressing [STP]
button.
For example: if pre-set is 3 minutes, press [STP] button once to double it to 6 minutes,
press [STP] button twice to triple it to 9 minutes and so on*.
- To reset timer to original value press and hold [STP]
button for about 2 seconds.
5.2 Timer Mode _ Countdown Timer
3-Minutes 6-Minutes 9-Minutes
[STP] [STP]
* Values can be increased up to a maximum of 100 times.

5.3 Timer Mode _ Countdown Timer
[S/LS]
- Press [S/L/S] button to start countdown, the countdown icon will start flashing.
- The countdown display from 59 seconds to 1 second will be displayed as large digits.
Alert Indications
- The timer will beep\vibrate once at each minute.
- The timer will beep\vibrate once at 50, 40, 30 & 20 seconds for the last minute of
countdown
- The timer will beep\vibrate once at each second for the last 10 seconds
- The timer will beep\vibrate for 3 seconds when it reaches zero.
- For 5.4.1.0 sequence, timer will beep\vibrate twice at minutes 4 and 1.
- The watch will keep silent when the Alert options have been set to OFF.

Key Lock Function (suspend buttons operation during counting)
- Whilst in Timer mode, press and hold [M]+[SLS] buttons at the same time to toggle the
key lock function ON/OFF.
When key lock function is ON the symbol will be shown.
Only the operation of the [S/L/S] and [STP] buttons will be locked in this mode.
Synchronisation Function
- When the Countdown Timer is running, press the [S/L/S] button to round off the counting
time.
- If the timer is in “SYNC Down” status, the timer will round down to the next full minute.
- If the timer is in “SYNC Round” status, the timer will round down or up to the closest
minute.
Repeat Function
- The repeat function can be accessed in the Timer Settings.
- When Repeat icon is on, the timer will repeat counting the pre-set values.
5.4 Timer Mode _ Countdown Timer
Repeat on IconKey Lock on Icon

Count-up Timer Mode
- When the Countdown Timer reaches zero, the icon will change to a icon and enter
the Count-up Timer.
Set Lap Time
(Up to 10 Laps)
Countdown Mode - zero
Count-up Mode - Stopped
Count-up Mode - Running
5.5 Timer Mode _ Count-up Timer
Auto return after 10 sec
[S/L/S]
[S/L/S]
[STP]
Reset
- When the Timer is stopped press and hold the [STP] button for about 2 seconds to reset
the timer and return to the countdown display.

Recall Icon
Count-up Mode
Recall - Total Time
5.6 Timer Mode _ Timer Recall
Timer Recall Mode
- In Timer Mode, the Stealth Timer can recall the total elapsed time and saved lap times
- Timer recall mode can be entered whilst the count-up timer is running or stopped by
pressing [M] button for about 2 seconds.
[M] [STP]
[S/L/S]
Recall - Lap Time
[S/L/S][STP]
[M]
2 Seconds

[M] [STP]
[S/L/S]
6.0 Compass Mode
Compass Mode
Wait 3 Seconds
Compass Display
Course Shift Mode
[STP][S/L/S]
Shift LeftShift Right
- To lock heading press [S/L/S] button, the Stealth Timer will then enter Course Shift Mode
- A new heading can be set in Course Shift Mode by pressing [S/L/S] button.
- Press [STP] to exit Course Shift Mode

6.1 Compass Mode _ Settings
Calibration:
To Calibrate Compass rotate watch through 360 degrees until boarder is complete.
Declination:
- To adjust declination
press [S/L/S] to increase value and [STP] to decrease value.
*Declination accounts for the difference between True North and Magnetic North and should
be set according to your current location
[M] [STP]
[S/L/S]
[M]
2 Seconds
Calibration Declination*
[S/L/S]
[M]
Auto Return

1/100
sec
7.0 Chronograph Mode
Set Lap Time
(Up to 50 Laps)
Chronograph - Running
Auto return after 10 seconds
[S/L/S]
[S/L/S]
[STP]
Recall - Total Time
[M] 2 Seconds
Recall - Lap Time
Chronograph Mode
[S/L/S]
[M] [STP]
[S/L/S]
Chronograph Recall Mode
- In Chronograph Mode, the Stealth Timer can recall the total elapsed time and saved lap
times
- Recall mode can be entered whilst the count-up timer is running or stopped by pressing
[M] button for about 2 seconds.
Reset
- When the Chronograph is stopped press and hold the [STP] button for about 2 seconds to
reset
[STP]
2 Seconds

8.0 Daily Alarm Mode
[M]
Minutes Hours
[M]
[STP] ON/OFF
[S/L/S] Alarm Test
[M]
2 Seconds
Alarm Settings
- Press [STP] button to toggle between alarm ON/OFF, when the alarm indicator
Icon
a ppears the alarm is on.
- The alarm will sound at the alarm time every day when the alarm is ON.
- The watch will beep for about 60 seconds at alarm time.
- The alarm can be stopped prematurely by pressing any button.
- In Alarm Mode press [S/L/S] to test alarm
Auto return after 60 seconds

This watch includes three power saving Functions designed to help the battery last
longer:
Standby Mode.
- In Clock Mode, when no key is pressed for 10 Minutes, the timer will enter Standby Mode.
- When in Standby Mode only the current time will be shown.
- To exit Standby Mode: press any key.
Power Save Mode.
- Power Save Mode can only be entered when in Clock Mode.
- To enter Power Save Mode: press and hold [STP] for 5 seconds.
- To exit Power Save Mode: press any key.
Power Down Mode.
- Power Down Mode can be only entered while in Clock Mode
- To enter Power Down Mode: press and hold ST./LAP/SYNC. [S/L/S] & Mode Button [M] for
5 seconds
- To exit Power Save Mode: press any key press and hold 5 seconds.
When in Power Saving Mode or Power Down Mode the display will be off
but all timers will continue running.
9.0 Power Modes.

The Stealth Timer has an easy battery change feature. To change the battery follow
the instructions below.
1- Turn the cover counter- clockwise with a coin gently until it opens
2- Replace the battery (CR2032) ensuring the negative side (-) is placed
against the silver metal connector.
CR2032
CR2032
10.0 Battery Changing