GJD EMERALD MK3 User manual

123 123
ZONE 1
GJD EMERALD MK3
ZONE 2
ITAUTOMATICALLY SWITCHES UP TO 3000 WATTS OF LIGHTING AT NIGHT FOR APRE-SET PERIOD
AND CAN BE MANUALLY OVERRIDDEN WHEN REQUIRED. THE CONTROLLER INCORPORATES AN
AUDIBLE WARNING TONE AND FEATURES SIX DETECTOR INDICATORS WHICH ILLUMINATE WHEN
ACTIVATED BY DETECTION DAY AND NIGHT.
SPECIFICATION
SUPPLY: 230Vac 50Hz via ELCB/MCB. - unit fused at 13A
12VDC @ 100mA for GJD Opal XL (6mA) or Elite Detectors (10mA)
Optional external 12VDC piezo sounder upto 50mA
INDICATION: Six 24 hour detector indicators which pulse during detection and
are steady after detection for the duration of the light on timer setting.
AUDIBLE: Internal warning tone which sounds on detection day and night,
and is button selectable. It has a steady tone for zone one and a
pulsed tone for zone two.
CONTROL: Controls upto 12 x GJD detectors. Switches two independent
areas of lighting with manual override when required.
OPTIONS: Ability to link both lighting areas together.
Ability to have a timed auxiliary output.
Ability to activate lighting when linked to an intruder alarm panel.
DIMENSIONS: 146(W) x 86(H) x 56(D) mm Weight 507gm
MOUNTING: Indoor use only.
Mount in a clean dry location on a secure flat surface
TEMPERATURE: -10 TO + 55 Centigrade
Self contained - Class 2 independently mounted control.
GJD EMERALD MK3 LIGHTING CONTROLLER
INSTALLATION MANUAL
PART NO: GJD010
THE GJD EMERALD IS ADUAL AREA
SECURITY LIGHTING CONTROLLER WHICH
ENABLES EXTERNAL AREAS TO BE
ACCURATELY MONITORED.
- 1 -

OPERATING INSTRUCTIONS
When a detector is activated day or night the relevant detector indicator flickers and
will remain on for the length of the timer setting. During darkness the lighting will
be switched on automatically while the detector is receiving activation signals, and
will automatically turn off after the preset timer period.
The ‘Zone1’ and ‘Zone 2’ green indicator have to be selected for automatically
controlled lighting on detection during darkness.
Green indicator is ‘on’. This mode must be selected on both zones
for automatic lighting during darkness.
Indicator ‘off’. Lighting and tone are switch off for this zone.
Green indicator flashing. A detector has activated the lighting for
a zone.
Manually selecting this yellow indicator will turn the lighting ‘on’
for both zones. Turning the indicator ‘off’ will return to automatic
mode.
Indicator ‘off’.
Yellow indicator flashing. A detection has automatically activated
a lighting zone.
Red indicator ‘on’. Audible warning tone selected.
Zone 1 and/or Zone 2 indicator to be selected to function.
Indicator ‘off’Audible warning tone is switched off for both
zones.
- 2 -
ZONE 1
ZONE 1
ZONE 1

ADJUSTMENT TO FACTORY SETTINGS:
AUX - AUXILIARY OUTPUT (50mA maximum)
OFF Internal sounder and auxiliary output disabled.
STD Internal sounder and auxiliary output active and will emit a
warning tone on each detection when the tone button is selected.
10-30 The auxiliary output time after last detection.
seconds The internal sounder is as the STD
LIGHT ON TIME IN MINUTES
1 to 24 The length of the light on time after last detection during darkness.
minutes The red detector indicators will stay on for this time after the last
detection day and night.
PULSE COUNT
Walk test Select this symbol to assist in location/alignment of the detector
beams during daylight installations.When the detector beams are
activated the external lights will stay on for a period of 6 seconds.
1, 2 or 3 After completing the ‘walk test’ function, set the pulse count to
the required level. The pulse count is the number of detector
beams that have to be crossed to trigger the system.
1 will give a fast response.
2 gives better immunity with good response.
3 gives highest immunity to false activations in poor
environments but is less responsive.
When connecting the unit to the electrical supply or when the supply is interrupted,
the indicators will flash for one minute whilst the system settles. Pressing any
button during this time will start normal operation.
AUX
TIME SECS LIGHT ON TIME MINS PULSE COUNT
30
STD
OFF
10 20
24
1
3510
3
2
1
Internal adjustments panel
The factory settings are shown.
- 3 -

(1) Link both lighting areas together (except in walk test) connect ‘LINK’ to ‘-’
(2) Remote triggering of lights for the timer period. Pulse Count ‘1’must be selected
(3) Activate zone lighting for alarm period when linked to an intruder alarm panel.
All diodes: IN4148, IN4002 etc
Caution if this equipment is intended for applications not specified please contact GJD prior to installation.
GJD Reserve the right to alter the specification without notice.
Technical: 01706 363990 Sales: 01706 363998 Fax [phone] Email: [email protected]
GJD Manufacturing Limited ©
- 4 -
CAUTION: TOBE INSTALLED BY QUALIFIED PERSONNEL ONLY:
Low voltage connections
Cable 4/6 core 7/0.2mm
BLACK
A
S
A
S
A
S
L INK
A UX
Z1
Z2
A1
A2
A3
S1
A1
A2
A3
S2
ZONE 1ZONE 2
123
ZONE 1
GJD DETECTORS
123
ZONE 2
GJD DETECTORS
OPTIONAL PIEZO SOUNDER
OR
RELAY + DIODE
12VDC / 50mA MAX
BLUE
YELLOW
RED
BLUE
BLUE
BLUE
BLUE
BLUE
BLUE
YELLOW/S
YELLOW/S
BLACK/S
RED/S
CABLE
CABLE CABLE
DUAL CABLE
CLAMPING SINGLE CABLE CLAMPING
BLUE
YELLOW
RED
BLACK
13A
N
N
N
230V
~
LIVE
1500VA MAX
1500VA MAX
LOAD 2
LOAD 1
MAINS
SUPPLY
LOAD
ZONE 1
LOAD
ZONE 2
13A
RED
RED
RED
BLACK
BLACK
BLACK
SLEEVED EARTH CABLES
GJD
BASE 2
PLUG TYPE FUSE
Z1
Z2
12VDC
CONNECTIONS
12VDC
100mA
Max
GJD EMERALD MK3
A
SA SA S
OPTIONAL
BUTTON
normally
open
contact
OPTIONAL
TRIGGER LIGHTS IN
ALARM CONDITION
1
2
3
Mains voltage connections
Cable 1.5mm flat twin/earth