GJD SAPPHIRE MK3 User manual

ITAUTOMATICALLY SWITCHES UP TO 1500 WATTS OF LIGHTING AT NIGHT FOR APRE-SET PERIOD
AND CAN BE MANUALLY OVERRIDDEN WHEN REQUIRED. THE CONTROLLER INCORPORATES AN
AUDIBLE WARNING TONE AND FEATURES FOUR DETECTOR INDICATORS WHICH ILLUMINATE WHEN
ACTIVATED BY DETECTION DAY AND NIGHT.
SPECIFICATION
SUPPLY: 230Vac 50Hz via ELCB/MCB. - unit fused at 10A
12VDC @ 100mA for GJD Opal XL (6mA) or Elite Detectors (10mA)
Optional external 12VDC piezo sounder upto 50mA
INDICATION: Four 24 hour detector indicators which pulse during detection and
are steady after detection for the duration of the light on timer setting.
AUDIBLE: Internal warning tone which sounds on detection day and night,
and is button selectable.
CONTROL: Controls upto 8 x GJD detectors. Switches one area of lighting
with manual override when required.
OPTIONS: Ability to activate lighting with remote push button.
Ability to have an auxiliary output.
Ability to activate lighting when linked to an intruder alarm panel.
DIMENSIONS: 146(W) x 86(H) x 56(D) mm Weight 495gm
MOUNTING: Indoor use only.
Mount in a clean dry location on a secure flat surface
TEMPERATURE: -10 TO + 55 Centigrade
Self contained - Class 2 independently mounted control.
GJD SAPPHIRE MK3 LIGHTING CONTROLLER
INSTALLATION MANUAL
PART NUMBER GJD005
THE GJD SAPPHIRE IS ASINGLE AREA
SECURITY LIGHTING CONTROLLER WHICH
ENABLES EXTERNAL AREAS TO BE
ACCURATELY MONITORED.
- 1 -
ZONE 1
GJD SAPPHIRE MK3
1423

OPERATING INSTRUCTIONS
When a detector is activated day or night the relevant detector indicator flickers and
will remain on for the length of the timer setting. During darkness the lighting will
be switched on automatically while the detector is receiving activation signals, and
will automatically turn off after the preset timer period.
The ‘Zone1’ green indicator has to be selected for automatically controlled lighting
on detection during darkness.
Green indicator is ‘on’. This mode must be selected for automatic
lighting during darkness.
Indicator ‘off’. Lighting and tone are switch off.
Green indicator flashing. A detector has activated the lighting.
Manually selecting this yellow indicator will turn the lighting ‘on’.
Turning the indicator ‘off’will return to automatic mode.
Indicator ‘off’.
Yellow indicator flashing. A detection has automatically activated
the lighting.
Red indicator ‘on’. Audible warning tone selected.
Zone 1 indicator to be selected to function.
Indicator ‘off’Audible warning tone is switched off.
- 2 -
ZONE 1
ZONE 1
ZONE 1

ADJUSTMENT TO FACTORY SETTINGS:
LIGHT ON TIME IN MINUTES
1 to 24 The length of the light on time after last detection during darkness.
minutes The red detector indicators will stay on for this time after the last
detection day and night.
PULSE COUNT
Walk test Select this symbol to assist in location/alignment of the detector
beams during daylight installations.When the detector beams are
activated the external lights will stay on for a period of 6 seconds.
1, 2 or 3 After completing the ‘walk test’ function, set the pulse count to
the required level. The pulse count is the number of detector
beams that have to be crossed to trigger the system.
1 will give a fast response.
2 gives better immunity with good response.
3 gives highest immunity to false activations in poor
environments but is less responsive.
When connecting the unit to the electrical supply or when the supply is interrupted,
the indicators will flash for one minute whilst the system settles. Pressing any
button during this time will start normal operation.
Internal adjustments panel
The factory settings are shown.
- 3 -
LIGHT ON
TIME MINS PULSE COUNT
24
1
3510
3
2
1

(1) Remote triggering of lights for the timer period. Pulse Count ‘1’must be selected
(2) Activate zone lighting for alarm period when linked to an intruder alarm panel.
All diodes: IN4148, IN4002 etc
Caution if this equipment is intended for applications not specified please contact GJD prior to installation.
GJD Reserve the right to alter the specification without notice.
Technical Assistance Tel: [phone] Fax [phone]
© GJD 2004
- 4 -
CAUTION: TOBE INSTALLED BY QUALIFIED PERSONNEL ONLY:
Low voltage connections
Cable 4/6 core 7/0.2mm
Mains voltage connections
Cable 1.5mm flat twin/earth
10A
N
N
230V ~
LIVE
1500VA MAX
LOAD 1
MAINS
SUPPLY
LOAD
ZONE 1
10A
RED
RED
BLACK
BLACK
SLEEVED EARTH CABLES GJD
BASE 1
PLUG TYPE FUSE
CABLE
CABLE CABLE
DUAL CABLE
CLAMPING SINGLE CABLE CLAMPING
Z1 BLUE
RED
BLACK
12VDC
CONNECTIONS
12VDC
100mA
Max
AUX
Z1
A1
A2
A3
A4
S1
ZONE 1
1234
OPTIONAL PIEZO SOUNDER
OR
RELAY + DIODE
12VDC / 50mA MAX BLUE
RED
BLACK
BLUE
BLUE
BLUE
BLUE
YELLOW/S
BLACK/S
RED/S
DIODE
IN4148
IN4002
etc
A
SA SA SA S
ZONE 1
GJD DETECTORS
GJD SAPPHIRE MK3
OPTIONAL
BUTTON
normally
open
contact
OPTIONAL
TRIGGER LIGHTS IN
ALARM CONDITION
2
1