Glacier bay 60BV35083 User manual

USE AND CARE GUIDE
60 INCH FARMHOUSE BATH VANITY
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this vanity. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Glacier Bay!
THANK YOU
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. – 7 a.m., EST, Monday - Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Item # 000-000
Model # 60BV35083
4-Color Glacier Bay Logo (FLBs, Blister Cards, Labels)
MOST COMMONLY USED
1 Color Glacier Bay Logo (Corrugate packaging and some FLBs)
2-Color Glacier Bay Logo (FSMs)

2
Table of Contents
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION:
Use care when installing your new vanity; take
your time and follow the installation instructions closely.
NOTE:
Some steps are more easily handled with two adults.
NOTE:
Assembly and unpacking requires two adults.
NOTE:
Do not try to pry off the top from the vanity.
Damage to the top or vanity may occur.
Safety Information.....................................................2
Warranty ..................................................................... 3
Pre-Assembly............................................................. 4
Planning Assembly ............................................................. 4
Tools Required ....................................................................4
Hardware Included .............................................................4
Package Concents ..............................................................5
Assembly .....................................................................6
Operation.....................................................................10
Maintenance ...............................................................11
Care and Cleaning ......................................................11
Service Parts ...............................................................12
CAUTION:
Before installation, carefully use scissors or a
utility knife to cut and unwrap all parts. Make sure you do not
discard the hardware.
Some of the building materials used in this home (or
these building materials) emit formaldehyde. Eye, nose
and throat irritation, headache, nausea and a variety
of asthma-like symptoms, including shortness of
breath, have been reported as a result of formaldehyde
exposure. Elderly persons and young children, as well
as anyone with a history of asthma, allergies, or lung
problems, may be at greater risk. Research is continuing
on the possible long-term effects of exposure to
formaldehyde.
Reduced ventilation may allow formaldehyde and other
contaminants to accumulate in the indoor air. High
indoor temperatures and humidity raise formaldehyde
levels. When a home is to be located in areas subject
to extreme summer temperature, an air conditioning
system can be used to control indoor temperature
levels. Other means of controlled mechanical ventilation
can be used to reduce levels of formaldehyde and other
indoor air contaminants.
If you have any questions regarding the health effects
of formaldehyde, consult your doctor or local health
department.
IMPORTANT HEALTH NOTICE

3HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one
year from date of purchase, subject to the following conditions and limitations:
Install and operate this Bathroom Vanity in accordance with the installation and operating instructions furnished with the product
at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
This warranty is non-transferable and is made to the original owner, provided that the purchase was made through an authorized
supplier of the product.
The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that
such part(s) have been subjected to normal conditions of use and service, after said defect is conrmed by the manufacturer’s
inspection.
The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale
price of the defective part(s).
Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair,
replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility
for same.
The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out
of the use, or inability to use the product, except as provided by law.
All other warranties – expressed or implied – with respect to the product, its components and accessories, or any obligations/
liabilities on the part of the manufacturer are hereby expressly excluded.
The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to
the sale of the product.
The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of
this product.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void if:
There has been unauthorized alteration, willful abuse, accident, or misuse of the product.
You do not have the original receipt of purchase.
IF WARRANTY SERVICE IS NEEDED
Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HOMEDEPOT.COM/GLACIERBAY. Make sure you have your
warranty, your sales receipt, location of purchase and the model/serial number of your product.
Warranty

4
Pre-Assembly
HARDWARE INCLUDED
Part Description Part Number Quantity
AA Washer P24BV35083-AA 4
BB Bolt PH-BLTBLK015 4
CC AAA battery P24BV35083-CC 8
DD Screw PH-SCRBLK018 4
AA BB CC DD
NOTE:
Hardware not shown to actual size.
PLANNING ASSEMBLY
Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.
If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
Estimated assembly and installation time: 2 Hours
TOOLS REQUIRED
Phillips
Screwdriver
Silicone
Adhesive
Safety
goggles Level Drill
ADHESIVE

5HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
D
PACKAGE CONTENTS
Part Description Quantity
A Foot 4
B Vanity 1
C Center foot 1
D Backsplash 1
Pre-Assembly (continued)
A
A
A
A
B
C

6
Assembly
1Attaching the Feet to the Vanity
Attach the feet (A) to the vanity’s bottom using washers
(AA) and bolts (BB).
A
AA BB
B
A
C
DD
A
A
2Attaching the Center Foot to the Vanity
Attach the center foot (C) to the vanity’s bottom using
screws (DD).

7HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Assembly (continued)
NOTE: It is very important that your
unit is level in order for your doors and
drawers to function properly. After moving
your unit to its nal location, you may
need to adjust the oor levelers.
3Adjusting the Levelers
Turn the levelers on the bottom of the feet (A) until the
vanity (B) is sitting even on the ground.
4Removing the Drawers
For better access to the pre-installed lights, remove the
drawers by simultaneously pushing down on the latch
on the right-hand drawer slide, and pulling up on the
latch on the left-hand drawer slide.
B
A
A
A

8
Assembly (continued)
5Inserting the Batteries into the
Pre-installed Lights
Slide the plastic housing for the light off toward the
front of the drawer, gently pushing up as you slide the
housing.
Insert the AAA batteries (CC) with the poles positioned
as shown.
Slide the housing back onto the light xture.
6Securing the Vanity to a Wall
With the help of another adult, place the vanity (B)
against the wall in desired permanent location. Be sure
the location is accessible to water supply and drain
lines before mounting.
Drill a hole through the vanity mounting rail as shown.
Secure the vanity (B) to a wall stud with at least one
screw (not included).
A toggle bolt (not included) may also be used to attach
directly to drywall.
If possible, secure the vanity (B) to two wall studs for
increased stability.
WARNING: The vanity needs to be
mounted to the wall to prevent accidental
tipping.
B
B

9HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Assembly (continued)
7Re-inserting the Drawers
Extend the slides from the drawer side rails on the
vanity and slide the drawers back into place.
8Installing the Optional Backsplash
To install the included optional backsplash (D),
apply silicone adhesive (not included) to the top
edges of the vanity's countertop (B).
Clean any excess adhesive before allowing to dry.
Install the faucet and drain set (not included)
according to the manufacturer’s directions.
D
NOTE: The included backsplash is
optional for installation. If you do not wish
to install, skip this step.
B

10
Operation
The battery may contain hazardous substances that
could endanger the enviroment and human health.
This symbol marked on the battery and/or packaging
indicates that used battery shall not be treated
as municipal waste. Instead it shall be left at the
appropriate collection point for recycling.
By correctly disposing of used batteries, you prevent
potential negative consequences for the environment
and human health. Recycling used materials also
conserves natural resources.
For more information about collecting and recycling
used batteries, please contact your local municipality,
your waste disposal service or the point of sale where
you purchased this product.
2Disposing of Used Batteries
1Replacing the Batteries
NOTE: Do not mix old and new batteries. Do not mix
alkaline, standard (carbon zinc), or rechargeable (NiCd,
NiMH, etc.) batteries. Do not ingest batteries.
When the light stops operating or its range seems
reduced, it is time to replace the batteries with new
ones.
On the back of the light box, press and slide
the battery door open and remove the old batteries.
Insert two AAA batteries, checking that the + and -
sides of the battery match inside the battery
compartment.
Replace the battery compartment door.
NOTE: Batteries should be removed if the product is
to be left unused for a long time.
NOTE: Each light requires two AAA batteries.