Glacier bay 833W-0001 User manual

THANK YOU
USE AND CARE GUIDE
TWO-HANDLE TUB AND SHOWER FAUCET
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Model #833W-0001
833W-0101
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this tub and
shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online
to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
REV.01THD

2
Table of Contents
Safety Information....................................2
Warranty ...................................................2
Pre-Installation.........................................3
Planning Installation ..............................3
Tools Required .......................................3
Hardware Included.................................3
Package Contents..................................4
Installation................................................5
8
Care and Cleaning ....................................
Service Parts.............................................9
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product. CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.

3 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product.
TOOLS REQUIRED
Safety
goggles Phillips
screwdriver
Strap
wrench
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part Description Quantity
AA Screw 2
Measuring
tape
Adjustable
wrench
Pipe
wrench
Thread sealant tape

4
Pre-Installation (continued)
PACKAGE CONTENTS
C
E
D
I
B
A
F
Part Description Quantity
A1
B Shower arm 1
C Shower head 1
D Valve body 1
E Flange 2
F Handle 2
G Index 2
Shower ange
GH
H Plug 1
I Tub spout 1

5 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation
1 Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□Shut off the water supply to the tub and
shower.
□Verify that the hole sizes and positions of the
holes in the wall are correct：
□The shower and tub spout outlet holes
should be 1-1/4 in. diameter.
□For the cold water inlet (the right side)
and the hot water inlet (the left side),
cut or leave a 1-3/8 in. diameter hole
(recommended size is 1-3/4 in.). The
center to center distance between the
cold and hot water inlets is 8 in.
2 Installing the supply
connections
□
Wrap thread sealant tape around the valve body
(D) threads in a clockwise direction, as shown.
□
Thread the waterline (1) to the valve body (D),
and tighten with a wrench.
NOTE: Be sure to position the body (D) correctly in the
wall, with the markings "UP" facing upward. Hot water
supply lines go into the H inlet; cold water supply lines go
into the C inlet.
NOTE: Do not disassemble the cartridges during normal
installation. When reinstalling the cartridge, be sure to
insert with the limit stop (a & b) pointed inward as shown
in the diagram. This is necessary for proper operation of
the valve.
a
b
Cold
Hot
1
D
1-3/8 in. ~ 2 in.1-3/8 in. ~ 2 in.
8 in.
8 in. Min.
30 in.
Shower Only
48 in.
Tub & Shower
30 in.
Tub & Shower
48 in.
Shower Only

6
Installation (continued)
3 Installing the tub and shower
outlet connections
□Wrap thread sealant tape around the pipe
threads in a clockwise direction, as shown.
Connect the shower (1) and tub outlet pipes (2)
to the valve body (D). Connect the pipe elbows
(3) (not included) to the ends of both pipes,
and tighten with a wrench.
□
4Flushing the water outlets and
checking for leaks
□
□
For tub and shower combinations, turn on the
hot and cold water supply lines, allowing water
to ow from the tub spout outlet (1) until all
debris is cleared from the line. Check all
connections for leaks.
For shower only installations, turn on the hot
and cold water supply lines, allowing water
to ow from the shower outlet (2) until all
debris is cleared from the line. Pressure must
be approximately equal on both hot and cold
sides for the valve to function properly. Check
all connections for leaks.
NOTE: Do not use PEX or CPVC between the valve and
spout.
NOTE: For shower-only installation, wrap thread sealant
tape around the threads of the plug (H), and insert it into
the bottom outlet (4).
3
1
D
2
Tub
Shower
H
4
3
1
D
Shower
2
1

7 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
5 Installing the shower flange,
shower arm, and shower head
□Insert the long end of the shower arm (B)
through the ange (A), then wrap thread sealant
tape around the long end of the shower arm (B)
in a clockwise direction, as shown.
□Install the long end of the shower arm (B) into
the pipe elbow inside the wall. The ange (A)
should t snug to the nished wall surface.
□Thread the shower head (C) onto the shower
arm (B).
□Carefully tighten the shower arm (B) and shower
head (C) with a clean strap wrench. Do not over
tighten, as it could cause damage to the shower
arm (B).
6 Installing the tub spout
□Wrap thread sealant tape around the pipe
threads of the tub spout outlet (1, not included)
in a clockwise direction, as shown.
Connect the tub spout outlet pipe (the tub
spout outlet pipe should project 3-7/8 in. to
4-1/16 in. from the nished wall) to the lower
pipe elbow (2, not included). Tighten the
elbows and tub spout outlet pipe connections
with the strap wrench.
□
Thread the spout (I) onto the tub spout outlet
pipe in a clockwise direction until the spout
(I) becomes ush with the nished wall. Use
a strap wrench to tighten the spout (I).
□
A
B
C
2
1
I
3-7/8 in. to 4-1/16 in.
Wall

8
Installation (continued)
7 Installing the handle
Care and Cleaning
□
□
□Do not use abrasive cleaners when cleaning this faucet.
□Position the anges (E) on the valves (D).
NOTE: Before proceeding, ensure the valves are closed.
□Attach the handles (F) to the stems (1), and secure them with the screws (AA). Use a Phillips
screwdriver to tighten the screws (AA).
□Attach the indexes (G).
E
D
F
1
AA
G

9 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Part Description Part Number
1RP38046*
2 Shower arm RP38019*
3 Washer RP64031
4 Shower head RP38137*
5 Index (H) RP10028
6 Index (C) RP10029
7 Screw RP50059
8 Handle RP13090
Shower ange
Service Parts
*Specify Finish
Part Description Part Number
9RP80387*
10 Nut RP70154
11 Connector RP70426
12 Cartridge RP22010
13 Seat & Spring RP22008
14 Diverter RP70160
15 Plug RP70153
16 Spout RP33052*
Flange
3
5
10
8
9
11
12 13 14
15
4
7
6
2
1
16

Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Retain this manual for future use.