glattCAD HEINKEL HE-162 SALAMANDER User manual

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
• RC Model Aircraft - 25% Scale
• Wingspan 180 cm
• Length 227 cm
• Take Off Weight 12 .. 18 kg
• CAD Designed - CNC Milled
• Wood Construction
• Supplemented with Composite Parts
• Jet or EDF Drive
Heinkel He-162 Salamander
Model Aircraft
glattCAD
design.
precision.
perfection.
Christoph Glatt
Bauernstr. 77
86462 Langweid
Germany
Web: www.glattCAD.de
Email: [e-mail]
MANUAL
Part 2: Empennage

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
Have Fun!
Kind regards,
Christoph Glatt.
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
[e-mail]
RC Model Aircraft
Span. 180 cm • Length 227 cm
Take Off Weight 12 .. 18 kg
He-162 Salamander 25%
Part 2: Empennage
Questions?
Part 1: Fuselage
Part 3: Wings

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
Introduction
Most images depicted in this manual will be self-explanatory.
You will find hints and tips in form of additional text where necessary.
Please browse the manual first to get an overall impression. If you are not sure what
step to do next skim the pages ahead and try to find the idea behind the design
that is not completely compehensive to you in the moment.
Cut out the pieces and parts from the milled boards using a box knife or a similar
sharp tool. Turn the board on its back so you can better see the small tabs that
need to be cut. If you break parts by accident this is not a problem. Wood is patient.
Modelers are used to glue things together (again).
Basically you should always test-fit the parts first before glueing. You can take PVA,
CA or any type of glue that is usually taken in wood model making. Use resin for the
typical highly stressed bonds and feel free to add some carbon stringers, wooden
reinforcements, ... where you find it useful (but: keep additional weight in mind).
Have fun!

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
1Elevator\
Jig (Auxiliary Build Board), ~Ribs

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
2Elevator\
Servomount, ~ Front Spar Box
Take your time clicking the "balsa combes" into the ribs step by step.
Anyway it will not be an issue if some
of the thin strips break.

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
3Elevator\
Front Spar Box

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
4Elevator\
Rear Spar Box

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
5Elevator\Rear Spar Box,
~ Electric Installation\Tube,
~ Leading Edge Spar

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
6Elevator\Leading Edge Spar,
~Electric Connection

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
7Elevator\
Removable Servo Cap

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
8Elevator\
Removable Servo Cap

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
9Elevator\
Rudder Blade
Glue a plastic tube (outer tube of "bowden cable", D3.0 x d2.1mm) into
ribs after having threaded the control horn parts
as shown below.

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
10 Elevator\
Rudder Blade\Leading Edge,
~ Covering
Saw/file grooves into the balsa parts H26 and H27 and glue the pieces
between the ribs and to the bowden tube.
Put on the upper 2mm balsa sheeting
on the rudder and roughly sand
the leading edge
to shape.

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
11 Elevator\
Connecting Both halves\
Axilliary Device
The following steps handle the connection of left and right elevator.
The correct angle is secured by using auxiliary parts L34 to be attached
to either of the elevator jigs.

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
12 Elevator\
Connecting Both halves\
Filling Part

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
13 Elevator\
Connecting Both halves\
Connectors
Recommendation:
Reinforce the area around H28 with some thickened resin and connect
the plastic tube to the rear spars by inserting small wooden filling pieces.
This region is vital for keeping the rudder blades safely connected to the
elevator!

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
14 Elevator\
End Cap

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
15 Elevator\
Fuselage Locating Faces

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.02_Teil2.01 - 2020-10 Flugmodelle
glattCAD
16 Elevator\
Centering Tab