glattCAD HEINKEL HE-162 SALAMANDER User manual

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
• RC Model Aircraft - 25% Scale
• Wingspan 180 cm
• Length 227 cm
• Take Off Weight 12 .. 18 kg
• CAD Designed - CNC Milled
• Wood Construction
• Supplemented with Composite Parts
• Jet or EDF Drive
Heinkel He-162 Salamander
Model Aircraft
glattCAD
design.
precision.
perfection.
Christoph Glatt
Bauernstr. 77
86462 Langweid
Germany
Web: www.glattCAD.de
Email: [e-mail]
MANUAL
Part 3: Wings

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
Have Fun!
Christoph Glatt.
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
[e-mail]
RC Model Aircraft
Span. 180 cm • Length 227 cm
Take Off Weight 12 .. 18 kg
He-162 Salamander 25%
Part 2: Empennage
Questions?
Part 1: Fuselage
Part 3: Wings

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
Introduction
Most images depicted in this manual will be self-explanatory.
You will find hints and tips in form of additional text where necessary.
Please browse the manual first to get an overall impression. If you are not sure what
step to do next skim the pages ahead and try to find the idea behind the design
that is not completely compehensive to you in the moment.
Cut out the pieces and parts from the milled boards using a box knife or a similar
sharp tool. Turn the board on its back so you can better see the small tabs that
need to be cut. If you break parts by accident this is not a problem. Wood is patient.
Modelers are used to glue things together (again).
Basically you should always test-fit the parts first before glueing. You can take PVA,
CA or any type of glue that is usually taken in wood model making. Use resin for the
typical highly stressed bonds and feel free to add some carbon stringers, wooden
reinforcements, ... where you find it useful (but: keep additional weight in mind).
Have fun!

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
1Wings

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
2
!
Root Rib
Please note: the root ribs for the left and right wing differ.

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
3Root Rib

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
4Flap Servo Frame

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
5
The auxilliary jig is used for both the left and right wing.
Therefore, please insert the legs of the ribs into the grooves and do not
glue!
You start building the left wing. The construction of the right wing is not
shown in this manual but it works in the same way.
Wing Main structure

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
6Aileron Servo Frame,
Wing connectors End Piece

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
7Flap Servo Frame

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
8"Comb Boxes",
Flap 2nd Hinge

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
9Spars

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
10 Spars,
"Comb Boxes"

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
11 "Comb Boxes"

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
12 Spars,
"Comb Boxes"

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
13
You will have to work out a little the two areas where the wing connector
outer tubes will be installed.
Take care:
As much as necessary, as little as possible!
"Comb Boxes",
Wing Connectro Outer Tube

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
14 Wing connectors End Piece

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
15
You start with the construction of the rudder hinges. The steps on the
following pages explain this in detail. Here you can
see what the construction will look like
in the end. Always test
before glueing!
Aileron & Flaps Suspension

Manual
He-162 Salamander • 25%
christoph glatt • bauernstr. 77 • 86462 langweid
[e-mail] • www.glattCAD.de
He162.26.05_Part3.01 - 2022-12 Flugmodelle
glattCAD
16 Flap 1st Hinge