Global Industrial 670613 User manual

1
MODEL #670613
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Global Industrial Spill Berms
High Profile
Models: 670613
UPON RECEIPT, INSPECT THE PRODUCT TO ENSURE THE ORIGINAL PACKING
MATERIAL IS INTACT AND THAT THE PRODUCT RELEASES EASILY FROM THE
PROTECTIVE SHEET
TO USE THE SPILL BERM:
1. Ensure there is no debris in the area where the spill berm will be used. Large debris can
prevent a perfect seal from forming.
2. Use proper PPE for the spill being handled.
3. Place the Spill Berm with the widest base down to stick to the ground. Surround the
spill on all sides to contain it
4. If longer lengths are needed, connect the Spill Berms using the connects on the ends.
Slide the slot into the cutout and ensure the connect is made all the way down,
otherwise a seal will not form.
Leaving the spill berm deployed will result in bonding to the surface it is on. Removing the blocker from a
surface that it has bonded to will likely damage either the blocker,surface, or both.

2
SPILL BERMS
URETHANE REACTS NEGATIVELY WITH SOME CHEMICALS. DO NOT USE SPILL BERM WITH INCOMPATIBLE
CHEMICALS. Exposure to incompatible chemicals will damage the product and prevent reuse.
CHEMICALS COMPATIBLE FOR USE WITH SPILL BERM:
• Acetonitrile
• Aluminum Salts
• Barium Salts
• Benzyl Alcohol
• Boric Acid
• Butanol
• Calcium Chlorite
• Carbon Disulfide
• Cupric Chloride
• Diethylamine
• Ethyl Acetate
• Formaldehyde
• Gasoline
• Glycol Ether
• Hexane
WARNING
•Hydrogen Peroxide (30%)
•Jet Fuel (JP-5)
• Kerosene
• Methanol
•Mineral Oil
• Naphtha
•Propylene Glycol
•Sodium Hydroxide (50%)
• Tetrachloroethylene
• Toluene
• 1,1,1-Tricholoroethane
• Tricholorethylene
• Triethylamine
• Turpentine
• Water
User Manual
TO DECONTAMINATE THE SPILL BERM:
1. Wash the Spill Berm using warm water and a non-abrasive detergent or petroleum
solvent cleaner. Always thoroughly clean dirt and other debris and reside from the
product before storing it.
2. As a final step before storing, wipe with soft cloth or wiper. Allow the Berm to dry
before storing.
STORING THE SPILL BERM:
ALWAYS DECONTAMINATE AND CLEAN THE SPILL BERM BEFORE STORAGE
AND REUSE.
1. Always use the protective plastic sheet to prevent the product from touching itself or
the storage container. If the plastic sheet is discarded or damaged, use a polyethylene
sheet at least 0.10mm thick.
2. Store the product in a cool, dry place.
Storage Notes
• Never allow the Spill Berm to be in contact with itself for long periods of time
• Store indoors to prevent UV exposure and uncontrolled temperatures and humidity.
To prolong the life of the product, avoid exposure to sunlight.
• The spill berm will become less flexible if stored in cold temperatures.
• Other factors, such as humidity and UV radiation exposure will affect the Spill Berm.
Periodically check the stored product to ensure product is still in working condition.
(Recommended checking every month)
• Donot expose to chemical vapors.
• Store in temperatures less than 120°F (49°C) and <80% humidity.