Global Sat BA-200 User manual

Please use bands to tie the
main device on your bike and
choose one proper rubber pad
placed under speed sensor.
BA-200 Speed / Cadence Combo Sensor User Manual
SUGGESTED COMPATIBLE DEVICE
OVERVIEW
SENSING AREA EXPLANATION
BA-200 INSTALLATION GUIDE
Pedal Magnet Rubber Pad 2Rubber Pad 1Spoke Magnet
(Arrow Sign)
Pedal magnet sensing area is indicated
by arrow in cadence sensor.
(Arrow Sign)
Spoke magnet sensing area is indicated
by arrow in speed sensor.
choose
one
1. Smart phone with BLE 4.0 support and compatible application software
2. BLE 4.0 compatible bike computer
3. Other BLE 4.0 support device with corresponding software
BA-200 Main Device
Cadence Sensor Speed Sensor

SPOKE AND PEDAL MAGNET INSTALLATION GUIDE
OTHERS
BATTERY (CR2032) CHANGE GUIDE
Please fasten the spoke magnet and
its base on the spoke of your bike
When pairing BA-200 with your BLE 4.0
compatible device, please trigger BA-200
several times first to wake up BA-200.
Step 1: Choose a proper coin to rotate the battery cover in
counterclockwise direction to open the battery cover.
Step 2: When taking out the battery, please note that the O-ring
should be still in its original groove.
Step 3: When placing the new battery (CR2032) back, please make
sure that the positive side of battery should be upward.
Step 4: Fasten the battery cover back in clockwise direction and you
can feel a “click” when it is tight.
Please use bands to tie the pedal magnet,
in the inner side of the crank in your bike.
We suggest that the distance between
spoke/pedal magnet and speed/cadence
sensing area should be less than 10 mm.
Please do not rotate the wire
between speed and cadence sensor.
This wire is not rotatable.