GM Lighting LT-3600RF User manual

RGB-12-CONTROLLER
Model LT-3600RF
LED RGB Controller
LT-3600RF (Common Anode)
Input Voltage
Max Current Load
Max Output Power
Grey Scale
Dimension
Package Size
Weight (G.W.)
DC12V DC24V～
216W/432W(12V/24V)
1024×1024×1024
L211×W40×H30(mm)
L313×W50×H32(mm)
230g
RGB-12-CONTROLLER is a multi-functional RGB LED controller, use the advanced PWM
(Pluse-Width Modulation) control technology, built-in 16 kinds of change
mode. Smooth
changing effect, without flicker; PC engineering plastic shell, light volume, exquisite
appearance; The receiver has 8 buttons, which are used for namely on/off, PAUSE,
MODE+/-, SPEED+/-, BRT+/-, compatible with RF remote (100m control distance ).
DC12V-24V wide voltage input, 3CHs output (common anode), wildly used for all kinds
LEDs with current-limiting resistor, like RGB LED modules, LED strips, SMD and so on.
1. Technical Specs:
6A 3CH×
Working Temperature -30 -55
℃℃
LED RGB Controller Manual
Power Supply Chosen DC CV SMPS
Remote Controlling Distance
Radio Frequency Range
RF Remote Output Power
ON/OFF, PAUSE, MODE+,MODE-, SPEED+,SPEED-, BRT+,BRT-.
8 function buttons on the receiver, which is corresponding to the first 8 button on the remote: namely
3. Operation Instructions:
2. Product Dimension:
100m
433.92MHz
8mW
HH
HHHH
40mm
30mm
16mm
15mm
10mm10mm
203mm
20mm
211mm
50mm 15mm
108mm
Receiver Sign RF remote
Control Sign
ON/OFF
PAUSE
MODE+
MODE-
SPEED+
SPEED-
BRT+
BRT-
Turn on/off the receiving controller.
Button
M M
S
B
S
B
M1 M2
M3 M4
4 DIY
Keys
Description
Press to stop changing.
Press again to continue.
Attn: press for 3s to turn on/off the buzzer.
Press to change modes
Press for 3s to auto cycle loop all the modes
Press for 3s to
MODE+/-
MODE+
MODE- 4 DIY modes
Press to speed up or slow down.
Press for 3s, the changing speed of all modes
.
current mode
will revert to factory defaults.
SPEED+ will
revert to factory defaults
Press for 3s, the changing speed ofSPEED-
Press to increase/decrease the brightness.
Keep pressing to change the brightness Continuously
Press for 3s to save your desired lighting effect.
Max 4 modes, could save repeatedly.
Press “Mode-“ in 3 seconds, the receiver will auto play these
4 DIY modes.
Attn: Press Mode- for 3s, merely play the changing DIY modes, the static color will be skipped.
ID learning Method:
Learning ID:Press on/off on the receiver for 3s, the RF LED green indicator will be on, then press any
key on the remote, when indicator becomes off means activated.
Cancelling ID: Press "on/off" on the receiver for 5s, the RF green indicator flashes once, then press any
key on the remote, when the indicator flashes several times means deactivated..
warranty
5 years
battery, A23-BP2
www.gmlighting.net e-mail: [email protected] GM Lighting, LLC •
9830 W. 190th St. • Unit F • Mokena, IL 60448 Toll-Free: [phone] FAX: [phone]

5. Wiring Diagram:
Connected to LED RGB Module:
HH
HHHH
VBGR
LED MODULE
R
B
G
R
B
G
LED MODULE
R
B
G
R
B
G
LED MODULE
R
B
G
R
B
G
LED MODULE
R
B
G
R
B
G
DC12V
DC12V
LN
AC DC
AC220V/ 110V
POWER
SUPPLY
POWER OUTPUT
INPUT
SIGNAL
MODEL: LT-3060
LED CONTROLLER
POWER REPEATER
H H HH
H H HH
H H
LN
AC DC
AC220V 110V
POWER
SUPPLY
DC12V
V
BGR
DC12V
LN
AC DC
AC220V 110V
POWER
SUPPLY
DC12V
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
HHHH
H H HH
HH
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
LED MODULE
R
B
G
HH
HHHH
LN
AC DC
AC220V 110V
POWER
SUPPLY
DC12V
in-phase cable
POWER OUTPUT
INPUT
SIGNAL
MODEL: LT-3060
LED CONTROLLER
POWER REPEATER
6 Conjunction Diagram Working with Power Repeater:.
(Wiring diagram with repeater)
4. Mode View :Table
Description
Sequence
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Modes
Static White
3 color Skipping
7 color Skipping
White Color Strobe
3 Color Smooth
Full Color Smooth
RG Color Smooth
RB Color Smooth
GB Color Smooth
White Color Fade & Change
Static Red
Static Green
Static Blue
Static Yellow
Static Purple
Static Cyan
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
Brightness and Speed Adjustable
7. Attention:
8. Warranty Agreement:
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please
ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please
also ensure that the cable is secured tightly in the connector.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
1. We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and
covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. GM shall not
be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by GM Lighting only.
★This manual only applies to this model. GM Lighting reserves the right to make changes without prior notice.
LT-3600RF LED RGB Controller Manual
GM Lighting, LLC • 9830 W. 190th St. • Unit F • Mokena, IL
60448 Toll-Free: [phone] FAX: [phone]
www.gmlighting.net e-e-mail: [email protected]
Specifications subject to change without notice.