Go-On 99398 Quick guide

16inch -GUN METAL STAND FAN
Operating and Safety Instructions
99398
FOR INDOOR HOUSEHOLD
USE ONLY

2
IMPORTANT SAFEGUARDS
Definitions
Whenever used, the following identify safety and property
damage messages and designate a level of hazard seriousness.
- This is the safety alert symbol. It alerts you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER – Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury. Usage of this signal word is limited to the most
extreme situations.
WARNING – Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION – Indicates a hazardous situation, which, if not avoided, may result
in minor/moderate injury.
NOTICE – Addresses practices not related to personal injury, such as product
and/or property damage.
When using this or any other electrical appliance, always follow these
basic safety precautions:
READ ALL INSTRUCTIONS
BEFORE USE.
WARNING-- To reduce the risk of fire, electric shock, or serious
personal injury:
•Keep this product out of the reach of children. This product is not
intended for use by children. Extra caution and close supervision are
necessary when using any appliance near children.
•Always ensure the product is unplugged from the electrical outlet and
allowed to cool before servicing, relocating, or cleaning it. Always
unplug the product from the electrical outlet when not in use.
•Do not operate this product with any solid-state speed control device.
•Do not plug/unplug the product into/from the electrical outlet with a wet hand.

3
•Unplug power cord whenever fan is not in use. Do not leave fan unattended
while it is plugged in.
•Do not immerse the product, power cord, or plug in water or other liquids. Do
not place the product in or near an open window as precipitation may enter the
product and cause electrical short-circuiting.
•To disconnect the product from an electrical outlet, turn any control to the Off
position and then pull directly on the plug; do not pull on the power cord.
•Do not insert fingers or objects through fan guards.
•Keep product away from sources of heat.
•Do not operate the product if it has a damaged or cut power cord or plug, if wires
are exposed, if it malfunctions, if it is dropped or damaged, or if it is dropped in
or exposed to water. This product has no user-serviceable parts. Do not attempt
to examine or repair this product yourself. Discard or return to an authorized
service facility for examination and/or repair.
CAUTION-- To reduce the risk of personal injury:
•This product is intended solely for indoor, non-commercial, non-industrial use in
circulating air; do not use outdoors or for any other purpose than intended.
•Do not hang or wall-mount the product.
•Do not run cord under carpeting or cover with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away
from traffic areas and where it will not be tripped over.
•Always operate the product on a flat, level, stable surface.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE

4
Parts
1. Fan grill
2. Fan blades
3. Motor housing
4. Oscillation button
5. Speed dial
6. Fan/stand attachment bolt
7. Angle-adjustment knob
8. Power cord and plug
9. Height lock
10. Standing pipe
11. Base

5
To Assemble
-Remove the base nut from the standing pipe. And then insert the standing
pipe into the hole of base, put the heavy base under the base. Fit the base
nut back to the standing pipe and screw it on firmly. See the picture of
“OVERVIEW OF FUNCTIONS”
-Remove the 4pcs screws form the motor pain.
-Fit the rear fan grill onto the motor pain. Make sure that the 4 holes on the
motor match the 4 holes on the rear fan grill. Fit the 4pcs screws and screw
it on firmly.
-Put the blade on the motor pain and carefully tighten the screw.
-Fit the front fan grill onto the rear cage and fix them together using the
metal clips. Tighten the small screw.
-Put the motor which installed the fan grill and blade on the top of the
standing pipe, screw it well. See the picture of “OVERVIEW OF FUNCTIONS”
To Use
CAUTION: Ensure the product is fully assembled before plugging it into an electrical
outlet.
The fan has 3 speed settings:
0- Fan is off
1- Lowest speed
2- Medium speed
3- Top speed
The fan can operate in oscillating or stationary mode. Press the oscillation button to
activate the oscillating mode.
The height of the floor fan can be adjusted.
Loosen the screw to move the stand up or down as required. Tighten the screw at the
desired position.
CLEANING
-Always switch the fan off and unplug it before cleaning.
-Clean the parts using a damp cloth and a mild detergent, and ensure that all
detergent residues is removed.
-Never use abrasive cleaning agents or solvents.
-Do not immerse in any form of liquid.
WARNING: Always unplug the product from the outlet when not in use or if it will be
left unattended.

6
User Servicing Instructions
WARNING: Always ensure the product is unplugged from the electrical outlet and
allowed to cool before servicing, relocating, cleaning, or storing it.
•This product is permanently lubricated at the factory before shipping and will not
require further lubrication for the life of the product.
WARNING: Additional lubrication of motor parts could increase the risk of a fire
hazard.
•Clean the exterior surfaces only by wiping with a soft, damp cloth. Dust can be
removed from the Guard (Grill) using a small vacuum.
WARNING: Do not allow water or other liquids to enter the interior of the
product.
NOTICE: Do not use abrasive cleaners/pads to clean the product, and do not
disassemble the Motor Housing for cleaning of internal parts, as doing so may
result in product damage and will void the warranty.
•Store the product with these instructions in the original box in a cool, dry place.
Electrical Specifications
Voltage Frequency Wattage
120 VAC
60 Hz
50 W