GO PERFORMANCE L5 Series User manual

SKU# 5G3610/5G3510/6G3110/6G3310 WWW.GO-PERFORMANCE.CA
1
WHAT’S INCLUDED:
§ 1 x LED Pod
§ 1 x U Mount Brackets
§ Mounting Hardware
5G3510/5G3610/6G3110/
6G3310
L5 SERIES POD
3” CUBE LED POD LIGHTS
U MOUNT
FEATURES & SPECIFICATIONS:
§ Light Output: 1,500 Lumens (Per Light)
§ Power: 20W @ 13.6V DC
§ Current: 1.5A @ 13.6V DC
§ Voltage: 10 - 36V DC
§ Dimension (H,W,D): 7.6 x 7.6 x 6.7 cm
§ IP Rating: IP 67
§ Beam Pattern:
SKU: 5G3610: Fog Beam (SAE J583)
SKU: 5G3510 Auxiliary High Beam (SAE J581)
SKU: 6G3110 Flood/Reverse (SAE J593)
SKU: 6G3310 Spot Beam
MOUNTING BRACKET INSTALL INSTRUCTION

SKU# 5G3610/5G3510/6G3110/6G3310 WWW.GO-PERFORMANCE.CA
2
INSTALL INSTRUCTION
Wiring Harness (840002) sold separately
1. This installation guide is for the following SKUs:
§ 5G3610 - L5 Series Pod, 3” Cube LED Pod Lights, Fog Beam, U Mount
§ 5G3510 - L5 Series Pod, 3” Cube LED Pod Lights, Driving Beam, U Mount
§ 6G3110 – L5 Series Pod, 3” Cube LED Pod Lights, Flood Beam, U Mount
§ 6G3310 – L5 Series Pod, 3” Cube LED Pod Lights, Spot Beam, U Mount

SKU# 5G3610/5G3510/6G3110/6G3310 WWW.GO-PERFORMANCE.CA
3
2. Determine and suitable mounting locations to install the LED Pods, wiring harness and switch. Once all
mounting locations are confirmed, connect the wires as shown above. Proper insulation at connections is
required.
3. Connect positive wire and negative wire properly. Press the switch to test if the lights are functioning
properly.
4. Adjust the light to the desired angle and then secure by tightening all mounting screws.