Go Power GP-RVC-R User manual

Side View
6
GP-RVC-R
Solar Controller Remote
Quick Start Guide
Find tech tips, manuals and support at gpelectric.com
1
2
4
5
3
Front View
ITEM
Warnings
Disconnect all power sources
Electricity can be very dangerous.Installation should be performed only by a licensed electrician or
qualified personnel.
Battery and wiring safety
Observe all safety precautions of the battery manufacturer when handling or working around
batteries. When charging, batteries produce hydrogen gas, which is highly explosive.
Wiring connections
Ensure all connections are tight and secure.Loose connections may generate sparks and heat. Be
sure tocheck connections one week after installation to ensure they are still tight.
Work safely
Wear protective eyewear and appropriate clothing during installation. Use extreme caution when
working with electricity and when handling and working around batteries.
No.
Descripon
1
LCD screen
2
Back Buon
3
Enter Buon
4
Down Buon
5
Up Buon
6
RJ12 Connectors
Button Operation
Interface
Status
Button
Press
Actions
Main Menu
[MENU3]
--
【UP】
Short or
long Press
No actions
【DOWN】
Short or
long Press
No actions
【ENTER】
Short press
Enter status interface
[MENU4]
Long press
Enter setting
interface [MENU9]
【BACK】
Short or
long Press
No actions
Status Menu
[MENU4] to
[MENU8]
--
【UP】Short press
[MENU8]->[MENU7]-
>[MENU4]
【DOWN】Short press
[MENU4]->[MENU5]-
>[MENU8]
【ENTER】Short press
Enter status menu
[MENU4]
【BACK】Short press
Enter main menu
[MENU3]
Setting Menu
[MENU9] to
[MENU17]
Not in
Setting
Mode
【UP】Short press
[MENU17]->[MENU1
6]->[MENU9]
【DOWN】Short press
[MENU9]->[MENU10
]->[MENU17]
【
ENTER
】
Short press
Enters Setting Mode
【BACK】Short press
Back to main screen
[MENU3]
In Setting
Mode
【UP】Short press
The flashing
parameter is
incremented by 1
【DOWN】Short press
The flashing
parameter is
decreased by one
increment
【
ENTER
】
Short press
Save the setting
【
BACK
】
Short press
No save the setting

Interfaces & Screens
[MENU 1]: RVC-DISPLAY: Shaking hands with the controller (only visible for a few seconds)
[MENU 2]: RVC-DISPLAY: Startup,displaying connected device information
Startup Menu
The GP-RVC-R displays charge current, charge voltage, as well as battery voltage and
current. An arrow on the left will indicate which battery you are viewing.
Main Menu
Status Menu
To enter the Status Menu, press the 【ENTER】key.
Settings Menu
To enter the Settings Menu, hold the 【ENTER】key.
Please note that only the GP-RVC-30-MPPT has dual-battery bank capability