GOAL ZERO Boulder 30 User manual

1

TECHNICAL SPECIFICATIONS
GET TO KNOW YOUR GEAR
PLUG IT
Plug directly into a Goal Zero Yeti Solar Generator.
SECURE IT
Use the bracket holes to secure the panel to a surface or to multiple Boulder 30 panels with Goal Zero Quick Clips.
POWER IT
When charging, connect the cable to the OUT port then into a Goal Zero product.
CHAIN IT
Using the included cable, connect the OUT port of one of the Boulder panels to the IN port of the next panel.
Structure
The Boulder 30 can take a beating.
It is framed with durable aluminum
and covered in tempered glass.
Cable for Chaining or Charging
When in use, plug the cable into your Boulder 30 Solar Panel and
Goal Zero Solar Generator or use the cable to chain Boulder Solar
Panels. When storing wrap it up and secure it with the velcro fastener.
Chaining Port
Connect multiple Boulder
30 panels to power up
your device faster.
Bracket Holes
Use the bracket holes on the side of
your panel to hang the Boulder 30.
Also use them to link and stabilize
several Boulder 30 panels together
with Goal Zero Quick Clips.
General
Chainable Up to 4
Weight 6.5 lbs (2.95 kg)
Dimensions 21 x 18 x 1 in
(53 x 46 x 2.5 cm)
Certs
Warranty 12 Months
Yeti 400
Solar Generator
Boulder 30
Solar Panel
LaptopHOW IT WORKS Goal Zero
GETTINGSTARTED
1. Be sure to activate your warranty at goalzero.com/warranty.
2. Open and remove from box.
3. Position the Boulder 30 panel at an angle facing the sun (see below).
4. Connect your Goal Zero Yeti Solar Generators to start charging.
Goal Zero Sherpa 50 4-8 hrs
Goal Zero Yeti 150 11-22 hrs
Goal Zero Yeti 400 26-52 hrs
Solar Panel
Rated Power 30W
Open Circuit Voltage 18-22V
Cell Type Monocrystalline
Ports
Solar Port (Blue, 8mm)
Male/Female 14-22V, up to 2A (30W max)
Boulder 30 Solar Panel
Q: Is the Boulder 30 waterproof?
A: Yes! The Boulder 30 is waterproof and rugged
terrain resistant. Just remember that the devices
you are powering might not be as durable.
Q: What Boulder 30 power packs can I use the
Boulder 30 with?
A: The Boulder 30 can be used to power any Goal
Zero power pack (some may require an adapter).
It is most effective with the Goal Zero Yeti Solar
Generators.
FREQUENTLY ASKED QUESTION
Q: Can the Boulder 30 be chained with other
Boulder 30 Solar Panels?
A: Yes, you can chain up to four Boulder 30s.
Q: Does the Boulder 30 give a full 30 Watts?
A: It delivers up to 30 Watts of power, but the
angle of the panels and the cloud coverage can
impact its performance. Avoid the shade. It will
not work indoors.
Q: Will the Boulder 30 break?
A: Not easily. It was made to last, but try to avoid
heavy impact that can weaken the frame and
cause the glass to crack.

TECHNICAL SPECIFICATIONS
GET TO KNOW YOUR GEAR
PLUG IT
Plug directly into a Goal Zero Yeti Solar Generator.
SECURE IT
Use the bracket holes to secure the panel to a surface or to multiple Boulder 30 panels with Goal Zero Quick Clips.
POWER IT
When charging, connect the cable to the OUT port then into a Goal Zero product.
CHAIN IT
Using the included cable, connect the OUT port of one of the Boulder panels to the IN port of the next panel.
Structure
The Boulder 30 can take a beating.
It is framed with durable aluminum
and covered in tempered glass.
Cable for Chaining or Charging
When in use, plug the cable into your Boulder 30 Solar Panel and
Goal Zero Solar Generator or use the cable to chain Boulder Solar
Panels. When storing wrap it up and secure it with the velcro fastener.
Chaining Port
Connect multiple Boulder
30 panels to power up
your device faster.
Bracket Holes
Use the bracket holes on the side of
your panel to hang the Boulder 30.
Also use them to link and stabilize
several Boulder 30 panels together
with Goal Zero Quick Clips.
General
Chainable Up to 4
Weight 6.5 lbs (2.95 kg)
Dimensions 21 x 18 x 1 in
(53 x 46 x 2.5 cm)
Certs
Warranty 12 Months
Yeti 400
Solar Generator
Boulder 30
Solar Panel
LaptopHOW IT WORKS Goal Zero
GETTINGSTARTED
1. Be sure to activate your warranty at goalzero.com/warranty.
2. Open and remove from box.
3. Position the Boulder 30 panel at an angle facing the sun (see below).
4. Connect your Goal Zero Yeti Solar Generators to start charging.
Goal Zero Sherpa 50 4-8 hrs
Goal Zero Yeti 150 11-22 hrs
Goal Zero Yeti 400 26-52 hrs
Solar Panel
Rated Power 30W
Open Circuit Voltage 18-22V
Cell Type Monocrystalline
Ports
Solar Port (Blue, 8mm)
Male/Female 14-22V, up to 2A (30W max)
Boulder 30 Solar Panel
Q: Is the Boulder 30 waterproof?
A: Yes! The Boulder 30 is waterproof and rugged
terrain resistant. Just remember that the devices
you are powering might not be as durable.
Q: What Boulder 30 power packs can I use the
Boulder 30 with?
A: The Boulder 30 can be used to power any Goal
Zero power pack (some may require an adapter).
It is most effective with the Goal Zero Yeti Solar
Generators.
FREQUENTLY ASKED QUESTION
Q: Can the Boulder 30 be chained with other
Boulder 30 Solar Panels?
A: Yes, you can chain up to four Boulder 30s.
Q: Does the Boulder 30 give a full 30 Watts?
A: It delivers up to 30 Watts of power, but the
angle of the panels and the cloud coverage can
impact its performance. Avoid the shade. It will
not work indoors.
Q: Will the Boulder 30 break?
A: Not easily. It was made to last, but try to avoid
heavy impact that can weaken the frame and
cause the glass to crack.