GOAL ZERO Nomad 50 User manual

1
1

4 5
GET TO KNOW YOUR GEAR
8mm Chaining
Connector
8mm OutputUSB Output Port
Connect a Nomad 50 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Bank by
inserting the 8mm blue-ringed connector into the 8mm input on the units. You can also charge USB devices
by plugging into the built-in USB port.
The safest and easiest way to chain Nomad 50 Solar Panels is by using an 8mm to APP Combiner Cable.
This plug-and-play method ensures you safely chain solar panels for recharging Goal Zero Yeti Portable
Power Stations.
HOW TO CONNECT
HOW TO CHAIN
Goal Zero’s 8mm Extension Cables provide greater distance between your solar panels and your power
stations. Purchase these from GoalZero.com.
OPTIONAL CABLES
Goal ZeroYeti 500X
Portable Power Station
Nomad 50
Solar Panel
Laptop
HOW IT WORKS
NOTE: Do not plug more than two chained Nomad 50 Solar Panels into anything smaller than the Goal Zero
Yeti 1000 as this will exceed their input ratings.

4 5
GET TO KNOW YOUR GEAR
8mm Chaining
Connector
8mm OutputUSB Output Port
Connect a Nomad 50 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Bank by
inserting the 8mm blue-ringed connector into the 8mm input on the units. You can also charge USB devices
by plugging into the built-in USB port.
The safest and easiest way to chain Nomad 50 Solar Panels is by using an 8mm to APP Combiner Cable.
This plug-and-play method ensures you safely chain solar panels for recharging Goal Zero Yeti Portable
Power Stations.
HOW TO CONNECT
HOW TO CHAIN
Goal Zero’s 8mm Extension Cables provide greater distance between your solar panels and your power
stations. Purchase these from GoalZero.com.
OPTIONAL CABLES
Goal ZeroYeti 500X
Portable Power Station
Nomad 50
Solar Panel
Laptop
HOW IT WORKS
NOTE: Do not plug more than two chained Nomad 50 Solar Panels into anything smaller than the Goal Zero
Yeti 1000 as this will exceed their input ratings.

6 7
Charges the following: Approx. Charge time:
Goal Zero Sherpa 100 AC 4-8 hrs
Goal Zero Yeti 200X
Lithium
8-16 hrs
Goal Zero Yeti 500X Lithium 16-32 hrs
Solar Panel
Rated Power 50W
Open Circuit Voltage Voc 18-22V
Cell Type Monocrystalline
Ports
Solar Port
(blue, 8mm, male)
14-22V, up to 3.3A (50W max)
USB port 5V, up to 2.4A (12W max)
General
Weight 6.85 lbs (3.1 kg)
Dimensions (unfolded) 17 x 53 x 1.5 in (43.2 x 134.6 x 3.8 cm)
Dimensions (folded) 17 x 11.25 x 2.5 in (43.2 x 28.6 x 6.4 cm)
Certs
Warranty 12 months
Nomad 50 Solar Panel
Be sure to activate your warranty at goalzero.com/warranty
TECHNICAL SPECIFCATIONS APPRENDRE À CONNAÎTRE VOTRE ÉQUIPEMENT
Raccord de 8 mm
Connecteur
Sortie de 8 mmPort de sortie USB

6 7
Charges the following: Approx. Charge time:
Goal Zero Sherpa 100 AC 4-8 hrs
Goal Zero Yeti 200X
Lithium
8-16 hrs
Goal Zero Yeti 500X Lithium 16-32 hrs
Solar Panel
Rated Power 50W
Open Circuit Voltage Voc 18-22V
Cell Type Monocrystalline
Ports
Solar Port
(blue, 8mm, male)
14-22V, up to 3.3A (50W max)
USB port 5V, up to 2.4A (12W max)
General
Weight 6.85 lbs (3.1 kg)
Dimensions (unfolded) 17 x 53 x 1.5 in (43.2 x 134.6 x 3.8 cm)
Dimensions (folded) 17 x 11.25 x 2.5 in (43.2 x 28.6 x 6.4 cm)
Certs
Warranty 12 months
Nomad 50 Solar Panel
Be sure to activate your warranty at goalzero.com/warranty
TECHNICAL SPECIFCATIONS APPRENDRE À CONNAÎTRE VOTRE ÉQUIPEMENT
Raccord de 8 mm
Connecteur
Sortie de 8 mmPort de sortie USB

20
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Nomad is a trademark of Goal Zero.
JG112619
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.