GOAL ZERO NOMAD 5 User manual

1
Table of Contents
Get To Know Your Gear 2
How It Works 3
Auto Restart 4
Frequently Asked Questions 4
Technical Specifications 5
Français 6
Español 10
Deutsch 14
日本語 18

GET TO KNOW YOUR GEAR
Adjustable
Kickstand
5 Watt Solar Panel
Flip Charging Dock
USB Output Port
2
Phone
2-4 Hrs Full Sun

3
HOW IT WORKS
Charging phones, batteries, and other USB-powered devices
from the Nomad 5 is as easy as plugging in.
1. Use the built-in kickstand to position the panel toward the
sun.
2. Plug your phone or device into the USB port located on the
back side of the panel and charge up.
NOTE
A Goal Zero Flip power bank (sold separately) will fit securely
into the Flip charging dock to collect and store power while on
the move.
STORE
Plug a Goal Zero recharger
or phone into the panel.
COLLECT
Gather the sun’s energy
with the solar panel.
POWER
Charge gear
anywhere.
WHAT IT POWERS
Phone
2-4 Hrs Full Sun
Goal Zero
Flip 24
8-10Hrs Full Sun
Goal Zero
Flip 36
11.5-14.5 Hrs Full Sun
+ Other
USB Devices
Goal Zero
Flip 12
4-5 Hrs Full Sun

4
AUTO RESTART
PRO TIP
Q: Is the Nomad 5 waterproof?
A: The best answer: it’s weatherproof. We’ve gone to great
lengths to ruggedize the Nomad 5; including beefing up the
manufacturing process with advanced lamination techniques so
it’ll slough off rain and snow.
Q: Does the Nomad 5 have a built-in battery?
A: No. In order to make the Nomad 5 as lightweight as possible,
we chose to sell batteries as an optional accessory. You can
either plug your phone or device into the Nomad 5 to charge up
directly from the sun, or pair the panel with one of our power
banks to collect and store power for later. The Nomad 5 works
seamlessly with our line of ultra-portable Flip power banks.
FREQUENTLY ASKED QUESTIONS
Solar Panel:
Rated Power 5W
Open Circuit Voltage Voc 6V
Cell Type Monocrystalline
Ports:
USB Port 5V, up to 1A (5W max)
General:
Weight 12.7 oz (360 g)
Dimensions 9.5 x 7 x 0.8 in
(24 x 17.8 x 2.0 cm)
Certs
Warranty 12 Months
Be sure to activate your warranty at goalzero.com/warranty
In low light conditions (i.e. lack of sunlight, shadow,
dusk, etc.), some devices, including smartphones, will
automatically disconnect from a solar panel due to a low
current input. The Nomad 5 features auto restart technology
that knows the difference between a device that has
reached a fully charged state and one that disconnects due
to environmental causes. When the latter is detected, the
Nomad 5 will automatically reconnect to start charging the
device again. No extra work on your part is needed.
When operating in low light conditions, we recommend
pairing your solar panel with a portable power bank for the
best charging experience possible. A Goal Zero Flip power
bank (sold separately) will fit securely into the Nomad 5’s
integrated Flip charging dock and allow you to collect and
store a continuous stream of power to charge your device.

5
TECHNICALSPECIFICATIONS
Solar Panel:
Rated Power 5W
Open Circuit Voltage Voc 6V
Cell Type Monocrystalline
Ports:
USB Port 5V, up to 1A (5W max)
General:
Weight 12.7 oz (360 g)
Dimensions 9.5 x 7 x 0.8 in
(24 x 17.8 x 2.0 cm)
Certs
Warranty 12 Months
Be sure to activate your warranty at goalzero.com/warranty
Nomad 5 Solar Panel

22
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Nomad is a trademark of Goal Zero.
JG022019
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TVtechnician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.