Godox MoveLink M2 User manual

MoveLink M2说明书±2mm80x100mm705-MLM200-00A项目类型项目名称产品料号尺寸(mm)尺寸公差材质工艺说明105g哑粉纸正反印刷，单色，骑马钉胡宾张玉版本设计师备注/色值校对GODOX设计文件图注

MoveLink 2.4GHz wireless
microphone system
说明手册 | Instruction ManualMoveLink
神牛微信公众号Follow Wechat Public AccountMade In China
地址: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋电话: [phone](8062) 传真: [phone] 邮箱: [email protected] 深圳市神牛摄影器材有限公司GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai Street, Bao’an
District, Shenzhen 518103, China
Tel: [phone](8062) Fax: [phone]
E-mail: [email protected]
godox.com
QC PASS

前言欢迎使用神牛2.4GHz数字无线麦克风系统MoveLink，利用2.4G波段来传输的音频产品，本产品适用于直播、采访、授课、短视频拍摄等场景，请仔细阅读本说明书，以便能正确的操作，发挥本产品的优越性能。产品特点系统使用的是全球通用频段2.4GHz 无线技术，采用跳频技术可避免同频干扰、可跟WIFI蓝牙同时使用（在大量WIFI节点存在的场合会受影响）； 无损音质，清晰稳定； 无线距离最大可达50m； OLED显示屏提供各项参数形象显示； 3.5mm耳机实时监听； 输出音量控制，提供静音功能； 发射/接收匹配稳定； 支持两路发射一路接收；单声道/立体声切换模式，轻松做到多输出选择；两种充电方式，内置锂电池可通过USB Type-C 接口直充或放入内置三个充电座的MoveLink充电盒触点式充电。①②③④⑤⑥⑦⑧⑨⑩警告请勿私自拆卸产品，如产品出现故障须由本公司或授权的维修人员进行检查维修。请保持干燥：请勿用湿手接触产品，亦不可将产品浸入水中或暴露于雨中。请勿让儿童接触本产品。请勿在易燃易爆环境中使用。在这些场合下，请注意相关警告标识。请勿放置在超过40度的高温环境中。若发生任何故障，请立即关闭电源。部件名称发射器（TX）内置麦克风3.5mm 音频接口开/关机键静音键工作指示灯配对键OLED显示屏USB Type-C 接口1.2.3.4.5.6.7.8. 1 2
3
4
7
5
8
6
1.2.3.4.5.6.7.8. 接收器（RX）3.5mm 音频同步监听接口3.5mm TRS 音频输出接口开关机/切换音量设置键声音+/-工作指示灯配对键OLED显示屏USB Type-C 接口2
1
6
4
3
7
8
5

使用外置麦克风: 把3.5mm领夹式麦克风插入发射器的3.5mm音频接口并扣紧；把发射器通过背夹夹到腰带上,再把另一头的领夹麦克风夹到衣领上。当使用外置麦克风时，内置麦克风会自动关闭。3.安装方法使用内置麦克风 : 把发射器通过背夹安装到衣领上，使内置麦克风指向音源方向。在使用过程中为了更好的隐蔽性，建议将背夹朝外固定使用。发射器（TX）1.OLED屏幕显示连接通道A表示连接A通道连接状态下图为已连接电池电量录音与静音图标此图为录音状态音浪指示①②③④⑤功能与使用方法1 2 3
4 5
2.功能介绍开关机：长按电源开关即可开/关机；开机状态下如有接入电源的USB Type-C 数据线插入，长按电源键进入待机状态，待机状态显示充电动画；待机状态下长按电源键可开机。短按静音键可开关静音。长按配对键可配对接收器，配对成功灯为蓝色。将接入电源的USB Type-C数据线插入发射器的USB Type-C接口即可充电。充电时，会显示充电动画。背夹内置麦克风

如需切换通道，短按电源开关键 可切换单独调节“A 通道”/“B 通道”/“双通道”音量，显示屏闪烁数字的通道为可调节音量通道，3秒无操作切换为双声道调节。单通道音量设定模式时，短按 /长按“音量+” 实现闪烁，通道声音递增，若A/B发射器音量调节达到最大值，只显示当前音量条，不做实际控制；短按/长按“音量 -” 实现闪烁，通道声音递减，若 A/B发射器音量调节达到最小值，只显示当前音量条，不做实际控制。音量调节为 16档：-5dB ~ 10dB。2.功能介绍A. 开关机：长按电源开关即可开/关机；开机状态下如有接入电源的USB Type-C 数据线插入，长按电源键进入待机状态，待机状态显示充电动画；待机状态下长按电源键可开机。B. 音量调节：(1)双通道音量设定模式时，短按“声音+/-”按键实现A/B发射器音量同时增加/减少功能；长按“声音+/-”按键实现A/B发射器音量同时持续增加/减少功能；3.安装方法搭配相机使用安装方法 : 把接收器通过背夹夹到相机的热靴座固定，通过 3.5mm TRS-TRS音频连接线连接接收器和相机。把耳机插入耳机监听插孔进行监听。接口及指示灯1.接口：发射器 LINE IN：音频信号输入接收器 LINE OUT：音频信号输出接收器音频同步接收口：监听接口连接耳机线C.长按配对键可配对发射器信号，左声道自动接收A发射器的信号，右声道自动接收B发射器的信号，短按实现独立声道和立体声切换。D. 将接入电源的USB Type-C数据线插入接收器的USB Type-C接口即可充电。充电时，会显示充电动画。(2)(3)(4)接收器（RX）1.OLED屏幕显示① A 通道发射器电量② B 通道发射器电量③ A/B 通道音浪动态显示④ 显示 A/B通道断开与连接⑤ 声道选择显示⑥ A/B 通道音量调节显示⑦ 音量调节界面⑧ 配对界面接收器-stereo接收器-调节音量接收器-A配对中1 2 5 8
3 6 74

配件： ①防风毛罩 ②全向型领夹式麦克风 ③3.5mm TRS-TRS 音频连接线（相机适配线） ④3.5mm TRS-TRRS音频连接线（手机适配线） ⑤USB Typc-C数据线 ⑥MoveLink 充电盒 ⑦手提绳 ⑧产品说明书 ⑨保修卡 2.指示灯：工作指示灯：常亮绿色时为产品在开机状态下正常工作。（1）发射器：待机状态时，指示灯熄灭；开机状态时，无连接橙黄色常亮；连接 A 通道时蓝色常亮；连接B通道时蓝色常亮； 正在配对时 , 红灯循环快闪两次。（2）接收器：待机状态时，指示灯熄灭；开机状态时，无连接橙黄色常亮；连接A通道时蓝色常亮；连接AB或B通道时蓝色常亮； 正在配对时 , 红灯循环快闪两次。包装清单MoveLink M1 =TX+RX① + ② + ③ + ④ + ⑤×2 + ⑧ + ⑨MoveLink M2 =TX+TX+RX①×2 + ②×2 + ③ + ④ + ⑤×2 + ⑥ + ⑦ + ⑧ + ⑨USB Typc-C数据线MoveLink充电盒手提绳说明书保修卡全向型领夹式麦克风3.5mm TRS-TRRS音频连接线(手机适配线)防风毛罩3.5mm TRS-TRS音频连接线(相机适配线)
1. MoveLink 充电盒（标配USB Type-C数据线×1、手提绳×1）MoveLink充电盒内置三个充电座，接入电源后，可同时为MoveLink系统的发射器/接收器触点式充电。
注：MoveLink M1套装不标配充电盒， MoveLink M2套装标配充电盒。可选配物品

MoveLink充电盒充电示意图：充电过程黄灯常亮，充满绿灯常亮。MoveLink 系统有两种充电方式：A. 可通过USB Type-C接口直充； B. 也可放 MoveLink充电盒触点式充电。充电指示灯充电接口规格参数
名称接收器RX发射器TX固定方式背夹插口(可安装相机闪光灯热靴里)显示屏OLED显示屏传输类型2.4GHz数字跳频系统 拾音模式全向型等效输入噪音21.8dB(A加权)频率范围50Hz-20KHz最大输出电平+3dBu信噪比70dB或更高灵敏度-32dB+/-2dB最大SPL120DB动态范围100dBA(麦克风前置放大器)工作范围50米(无遮挡条件下)供电方式内置锂电池电池寿命约6H电池容量300mHa模拟输入3.5mmTES领夹式麦克风输入模拟输出3.5mmTES工作环境温度-10~50℃整机尺寸长50mm × 宽40mm × 厚14mm 整机重量27g长163mm × 宽66mm × 厚28mm 名称MoveLink充电盒ML-C3材质ABS材质适用机型MoveLink TX 、MoveLink RX充电输入USB Type-C尺寸重量129g

故障排除如不能接收到音频信号，请检查电池是否正确安装以及是否打开发射器电源；发射器和接收器是否设置在同一组别和频道；麦克风及耳机是否已正确牢固连接到位；功能模式是否设置正确。检查发射器是否设置的静音。 如您的发射器受到他人干扰，改变发射器和接收器的频道设置即可。 如您发现发射音频距离有限或者有漏发现象，请检查是否电池耗尽，请尝试更换电池。维护保养避免跌落：如果受到强烈碰撞或振动，发射器和接收器可能会发生故障。保持干燥：本产品是非防水产品，如果将其浸入水中或放置于高湿度的环境中将可能发生故障。内部构造生锈可能会导致无法修理的损害。避免温度骤变：温度的突变，诸如在寒冷天进出温暖的大楼将可能会使发射器和接收器内部结露。为避免结露，请将设备事先装入手提袋或塑料包内，以防温度突变。远离强磁场：无线电广播发射机等设备产生的强静电或强磁场可能会干扰本产品正常工作。

要保修服务，您可直接与产品销售商或授权服务机构联系，也可拨打神牛产品售后服务电话，与我们联系，由我们的服务人员为您安排服务。申请保修时，您应提供有效的保修卡作为保修凭证，方可获得保修。如您不能提供有效的保修卡，则在我们可确认产品或部件属于保修范围的情况下，也可以为您提供保修,但这不作为我们的义务。
如何获得保修服务
产品及部件的相应保修期按相关的《产品保修信息》执行。保修期自产品首次购买日起算，购买日以购买产品时保修卡登记日期为准。
保修期
本文件适用于相关《产品保修信息》(见后面说明)所列产品，其他非属此范围的产品或部件(如促销品、赠品及其他出厂后附加的部件等)不在此保修承诺内。
产品信息
尊敬的用户，本保修卡是申请保修服务的重要凭证，请您配合销售商填写并妥善保管，谢谢！产品保修
产品信息用户信息销售商信息备注型号姓名通信地址名称联系电话通信地址销售日期产品条码联系电话注：此表应由销售商盖章确认。
如产品存在下列清况，本文件项下的保证和服务将不适用 ① 产品或部件超过相应保修期；②错误或不适当使用、维护或保管导致的故障或损坏，如：不当搬运；非按产品合理预期用途使用；不当插拨外接设备；跌落或外力挤压；接触或暴露于不适当温度、溶剂、酸碱、水浸或潮湿环境；③由非神牛授权机构或人员安装、修理、更改、添加或拆卸造成的故障或损坏；④产品或部件原有识别信息被修改变更或除去；⑤无有效保修卡；⑥使用非合法授权、非标准或非公开发行的软件造成的故障或损坏；⑦因不可抗力或意外事件造成的故障或损坏；⑧其他非因产品本身质量问题导致的故障或损坏。遇上述情况，您应向相关责任方寻求解决，神牛对此不承担任何责任。因非在保修期或保修范围内的部件、附件或软件导致产品不能正常使用的，不是保修范围内的故障。产品使用过程中正常的脱色，磨损和消耗，不是保修范围内的故障。
不适用保修的情况产品保修和服务支持信息
产品的保修期和服务类型按以下《产品保修信息》执行：
神牛产品售后服务电话 [phone]-8062产品类别选件名称电路板客户送修电池充电器、电源线，同步线等带电性能的部件客户送修客户送修无保修1212无3部件其他如电池盒、防风棉、防风毛罩、锁紧装置、手提绳、扎带、魔术贴、领夹、便携袋、包装等保修期(月)保修服务类型

Thank you for purchasing Godox MoveLink 2.4GHz wireless microphone system.
These products are suitable for video recording, journalistic shooting, audio record-
ing, etc. Please read this manual carefully before using to make sure the correct
operation and exert the optimum function.
Forward
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Keep out of reach of children.
Do not use the flash unit in the presence of flammable gas. In certain circum-
stance, please pay attention to the relevant warnings.
Do not leave or store the product if the ambient temperature reads over 40℃.
Turn off the devices immediately in the event of malfunction.
Warning
Names of Parts
Adopt globally accepted 2.4GHz wireless and frequency-hopping technology to
avoid same frequency disturbance, which can be used in WIFI and Bluetooth
simultaneously (may be influenced in occasions with multiple WIFI nodes)
Clear, stable and lossless sound quality
The maximum wireless distance up to 50m
With OLED display to show the parameters setting
Support 3.5mm Earphone real-time monitoring
With output volume control and silence function
Stable match of transmitting and receiving
Supports two-way transmitting and one-way receiving
Freely switch mono or stereo channel to offer more output options
Two lithium battery charging methods through USB port or MoveLink charging
case
Features
①②③④⑤⑥⑦⑧⑨⑩Transmitter (TX)
1. Built-in Microphone
2. 3.5mm Audio Port
3. Power Switch Button
4. Silent Button
5. Working Indicator
6. Pairing Button
7. OLED Display
8. USB Type-C Port
1 2
3
4
7
5
8
6

Transmitter (TX)
1. OLED Display
2. Function Introduction
3. Installation Method
Icon 1: connecting channel. A means connect-
ing to A channel.
Icon 2: connecting state. The icon on the
picture means connected state.
Icon 3: battery level.
Icon 4: recording and silent icon. The icon on
the picture means recording state.
Icon 5: soundbyte indication.
Receiver (RX)
1. 3.5mm Audio Sync Monitoring Port
2. 3.5mm TRS Audio Output Port
3. Power Switch/Switch Volume Setting Button
4. Sound +/-
5. Pairing Button
6. Working Indicator
7.OLED Display
8. USB Type-C Port
Power switch: long press the power switch to power on or off. In the state of
power-on, if there is USB Type-C Cable inserted, long press the power switch
to enter standby state and the charging animation will be displayed. In standby
state, long press the power switch to power on.
Short press the silent button to switch on or off silent mode.
Long press the pairing button to match the receiver. The indicator will light
blue when successfully matched.
Charge the products through USB Type-C port directly. The charging anima-
tion will be displayed in charging.
Functions and Operation
Using built-in microphone:
Install the transmitter on the collar through the back clip, aiming the built-in
microphone towards the sound source direction.
For achieving better invisibility during the usage, it is recommended to fix the back
clip towards the outside.
1 2 3
4 5
2
1
6
4
3
7
8
5
Back Clip Built-in
Microphone

2. Function Introduction
A. Power Switch: long press the power switch to power on or off. In
the state of power-on, if there is USB Type-C inserted, long press the
power switch to enter standby state and the charging animation will
be displayed. In standby state, long press the power switch to power
on.
B. Volume Adjustment:
(1) In dual sound setting mode, short press the “sound +/-”button to
increase or decrease the A/B transmitter’ s sound volume simultane-
ously；long press the “sound +/-”button to increase or decrease the
A/B transmitter’s sound volume gradually.
(2) Switch Channel: Short press the power switch button to separately adjust the
volume of “A channel”, “B channel” and “A&B dual channel”. The channel with
blinking figures can be adjusted volumes and will be switched to dual channel
adjustment if there are no operations after 3 seconds.
(3) In mono channel mode setting, short press or long press the “volume +” to
increase the channel’ s volume gradually. If one of the transmitter’ s volumes is up to
maximum, the current volume slider can only be displayed instead of being
controlled；short press or long press the “volume -” to decrease the channel’ s
volume gradually. If one of the transmitter’s volumes is
up to minimum, the current volume slider can only be displayed instead of being
controlled.
(4) There are 16 levels of volume adjustment: 00db-15db.
Insert the 3.5mm lavalier microphone into the transmitter’ s 3.5mm audio port and
lock it tightly. Clip the transmitter onto the belt by back clip and clip the lavalier
microphone on the other end onto the collar. When using the external microphone,
the built-in microphone will be atomically turned off.
Using External Microphone:
Receiver (RX)
1. OLED Screen Displa
A channel transmitter’s battery level
B channel transmitter’s battery level
Sound channel selection display
A/B channel’s volume adjustment display
A/B channel’s soundbyte dynamic display
Connection or disconnection of A/B channel
Sound volume adjustment interface
Pairing interface
Icon 1：Icon 2：Icon 3：Icon 4：Icon 5：Icon 6：Icon 7：Icon 8：C. Long press the pairing button to match the singles of transmitters. The left
channel will automatically receive A transmitter’ s singles while the right
channel will receive B transmitter’ s. Short press the pairing button to select
mono channel and stereo channel.
D. Charge the products through USB Type-C port directly. The charging
animation will be displayed in charging.
接收器-stereo接收器-调节音量接收器-A配对中1 2 5 8
3 6 74

① Wind Cap ② Omnidirectional Lavalier Microphone ③ 3.5mm TRS-TRS Audio
Connect Cable (For Camera) ④ 3.5mm TRS-TRRS Audio Connect Cable (For
Smartphone) ⑤ USB Type-C Cable ⑥MoveLink Charging Case ⑦ Hand Strap
⑧ Instruction Manual ⑨ Maintenance
What’s Inside
3. Installation Method
Installation Methods When Attaching to Camera:
Install the receiver onto the camera’ s hotshot and tighten it through the back clip.
Then, connect the receiver with the camera by 3.5mm TRS-TRS audio Connect
cable. Insert the earphone into the earphone’s monitoring port to listen.
MoveLink M1 =TX+RX
①+ ②+ ③+ ④+ ⑤+ ⑧+ ⑨Omnidirectional
Lavalier Microphone
3.5mm TRS-TRS
Audio Connect Cable
(For Camera)
Wind Cap
USB Type-C
Cable
MoveLink Charging Case Hand Strap
3.5mm TRS-TRRS
Audio Connect Cable
(For Smartphone)
Instruction Manual Maintenance
Transmitter LINE IN: audio singles input
Receiver LINE IN: audio singles output
Receiver audio sync receiving port: insert the earphone cable into
monitoring port
Port and Indicator
1. Ports:
Working indicator: the indicator will display green in normal working state.
(1) Transmitter
In standby state, the indicator will be off.
In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel.
During the pairing, the indicator will blink in red for two times circularly.
2. Indicator:
(2) Receiver
In standby state, the indicator will be off.
In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel.
During the pairing, the indicator will blink in red for two times circularly.

Optional Accessory
Technique Data
1. MoveLink Charging Case (Include USB Type-C Cable and a hand strap)
There are three charging bases in MoveLink, which can charge three transmitters or
receivers of MoveLink system after being connected to power supply.
Name Receiver RX Transmitter TX
Fixing Method Back clip (installed onto camera’ s hotshoe )
Display OLED Display
Transmission Type 2.4GHz Frequency hopping system
Sound Pick-up Mode Omnidirectional
Equivalent Input Noise Level 21.8dB（A weighting）Frequency Range 50Hz-20KHz
Max. Output Electrical Level +3dBu
Single to Noise Ratio 70dB or higher
Sensitivity -32dB+/-2dB
Max. SPL 120DB
Dynamic Range 100dBA (microphone preamplifier)
Working Range 50m (in no shelter situation)
Power Supply Built-in lithium battery
Battery Life Approx. 6H
Battery Capacity 300mHa
Simulated Input 3.5mmTES Lavalier microphone input
Simulated Output 3.5mmTES
Working Environment Temperature -10~50℃Dimension Length 50mm × width 40mm × thickness14mm
Weight 27g
MoveLink M2 =TX+TX+RX
①×2 + ②×2 + ③+ ④+ ⑤×2 + ⑥+ ⑦+ ⑧+ ⑨Note: MoveLink M1 do not
include MoveLink Charging Case
while MoveLink M1 includes a
MoveLink Charging Case.
MoveLink system has two charging ways:
A. being charged from USB Type-C cable;
B. being charged through MoveLink Charging Case.
MoveLink Charging Case Schematic Diagram of Charging：The indicator will display yellow during the charging process and turn to green when
being fully charged.
Charging Port
Charging Indicator

Troubleshooting
Unable to receive audio signal. Make sure batteries are installed correctly and
Power Switch is turned on. Check if the transmitter and the receiver are set to the
same channel, if the microphone or earphone is well connected, or if the devices are
set to the correct mode.
Check if the transmitter is set to silent mode or not.
Signal disturbance or shooting interference. Change a different channel of the
transmitter and receiver.
Operation audio distance limited or signal missing. Check if batteries are exhausted.
If so, replace them.
Maintenance
Avoid sudden drops. The device may fail to work after strong shocks, impacts, or
excess stress.
Keep dry.
The product isn’ t water-proof. Malfunction, rust, and corrosion may occur and go
beyond repair if soaked in water or exposed to high humidity.
Avoid sudden temperature changes. Condensation happens if sudden temperature
changes such as the circumstance when taking the product out of a building with
higher temperature to outside in winter. Please put the product in a handbag or
plastic bag beforehand.
Keep away from strong magnetic field. The strong static or magnetic field produced
by devices such as radio transmitters leads to malfunction.
Changes made to the specifications or designs may not be reflected in this manual.
Name MoveLink Charging Case ML-C3
Material ABS Material
Suitable Models MoveLink TX、MoveLink RX
Charging Input USB Type-C
Dimension Length 163 × Width 66 × Thickness 28
Weight 129g

The warranty period of products and accessories isimplemented according to the
relevant Product Maintenancelnformation. The warranty period is calculated from the
day(purchase date) when the product is bought for the first time,And the purchase
date is considered as the date registered onthe warranty card when buying the
product.
Warranty Period
If maintenance service is needed, you can directly contact the product distributor or
authorized service institutions. You can also contact the Godox after-sale service
call and we will offer you service. When applying for maintenance service, you
should provide valid warranty card. If you cannot provide valid warranty card, we
may offer you maintenance service once confirmed that the product or accessory is
How to Get the Maintenance Service
Dear customers, as this warranty card is an important certificate to apply for our
maintenance service, please fill in the following form in coordination with the seller
and safe-keep it. Thank you!
Warranty
The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional
items,giveaways and additional accessories attached,etc.) are not included in this
warranty scope.
Applicable Products
Product Information
Customer Information
Seller Information
Note
Model
Name
Address
Name
Contact Number
Address
Date of Sale
Product Code Number
Contact Number
Note: This form shall be sealed by the seller.
The guarantee and service offered by this document are not applicable in the
following cases: ①. The product or accessory has expired its warranty period;
②. Breakage or damage caused by inappropriate usage, maintenance or
preservation, such as improper packing, improper usage, improper plugging
in/out external equipment, falling off or squeezing by external force, contact-
ing or exposing to the improper temperature, solvent, acid, base, flooding and
damp environments, etc; ③.Breakage or damage caused by non-authorized
institution or staff in the process of installation, maintenance, alternation,
addition and detachment; ④. The original identifying information of product or
accessory is modified, alternated, or removed; ⑤. No valid warranty card; ⑥.
Breakage or damage caused by using illegally authorized, nonstandard or
non-public released software; ⑦. Breakage or damage caused by force
majeure or accident; ⑧. Breakage or damage that could not be attributed to
the product itself. Once met these situations above, you should seek solutions
from the related responsible parties and Godox assumes no responsibility. The
damage caused by parts, accessories and software that beyond the warranty period
or scope is not included in our maintenance scope. The normal discoloration,
abrasion and consumption are not the breakage within the maintenance scope.
Inapplicable Cases
The warranty period and service types of products are implemented according to the
following Product Maintenance Information:
Maintenance and Service Support Information
Godox After-sale Service Call 0755-29609320-8062
Product Main Body Customer sends the product
to designated site
Customer sends the product
to designated site
Customer sends the product
to designated site
Battery
Charger, Power Cable,Sync
Cable, Electrical Parts etc.
Without warranty
12
12
No
3
Parts
Other
Items
Battery Case, Windproof
Sponge, Wind Cap, Locking
Device, Lanyard, Tie, Velcro
Tape, Clip, Bag, Package etc.
Product
Type
Name Maintenance
Period(month)
Warranty Service Type
involved in the maintenance scope, but that shall not be considered as our
obligation.

FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction