gofanco Splitter4P-HD20 User manual

4-Port HDMI 2.0 Splitter
User's Guide
G4-0086A
P/N: Splitter4P-HD20

2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
[email protected]. For drivers/manuals
download, please go to www.gofanco.com/
downloads.
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to rain, heavy
moisture, or liquid
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating

3
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables in/out when
the device is in use to avoid cable damage.
Make sure they are plugged into the correct
ports
• UsetheincludedDC5Vpoweradapteronly.
Makesurethe specification matches if using
3rd-party DC power adapter

4
Introduction
The 4-Port HDMI 2.0 Splitter splits HDMI signals
from an HDMI source to 4 HDMI outputs.
Features
• Supportsupto4K@60HzYUV4:4:4,HDR10
and Dolby Vision
• HDMI 2.0 and up to HDCP 2.3
• 18Gbps bandwidth
• Supports 4K to 1080p downscaling
• Supports CEC
• Firmware upgradable
PackageContents
• 4-Port HDMI 2.0 Splitter
• Power adapter
• User's Guide

5
Installation Requirements
• HDMI source device (computer, DVD
player, XBOX, PS3, etc)
• HDMI display device (SDTV/Monitor,
HDTV/Monitor, projector, etc.)
• HDMI cables
Product Layout
Figure 1: Product Layout
1 Power LED LED is solid red when powered on
2InputLED LED blinks blue when HDMI source signal is
detected
3 HDMI In Connects to your HDMI source
4 Scaler On/Off Turns On/Off down-scaling function
5 Micro USB Port
Power: Connects to the included power adapter
Firmware update: Connects to PC using a Micro
USB cable (cable not included)
6-9 Output LEDs (x4) LED is solid blue when HDMI display is detected
6-9 HDMI Out (x4) Connects to your HDMI display

6
Hardware Installation
1. Power off all devices including your HDMI
source and HDMI display(s).
2. Connect your HDMI source device to the
Splitter'sHDMIInconnectorwith an HDMI
cable (HDMI cable not included).
3. Connectyour HDMIdisplay(s)tothe HDMI
Outconnector(s)withanHDMIcable(HDMI
cable not included).
4. Plug the included power adapter into the
Splitter's Micro USB port, then plug the
power adapter into a reliable power source.
5. Power on all connected devices.
6. The Splitter is ready for use.

7
Application
HDMI Out
HDMI In
Resolution Downscaling
The 4K signal can be automatically down-scaled
to 1080p resolution for compatibility with 1080p
displays,see thetablebelow formoreinformation.
HDMI Out
HDMI Out

8
Firmware Update
Follow the steps below to upgrade the firmware.
1. Connect the Splitter to the PC using a Micro
USB to Type-A cable (cable not included).
2. The PC will automatically detect a "USB
drive".
3. Double click the USB drive to open the
drive, a file named "Ready.txt" will be
shown.
4. Copy the firmware update file (.bin) to the
USB drive.
5. When you see "Success.txt", the firmware
update is completed. Note: If you don't see
"Success.txt", check the firmware update
file (.bin) and follow the update steps again.
6. Remove the Micro USB cable and reconnect
all devices.

9
FAQ & Solutions
Q: There is no video output or audio and
video display is not normal:
A: 1) Check the HDMI cables for proper
connection.
2) Use higher quality HDMI cables.
Q: The Splitter is not working properly:
A: 1) Please check the cable lengths below:
- HDMI cables: 4K@60Hz: up to 5m, 1080p:
up to 15m
2) Use HDMI 2.0 cables.
Q: The Input LED is blinking but there is no
image:
A: 1) Make sure the HDMI cable is firmly
connected to the display.
2) Make sure the Output LED is solid blue.
3) Connect the HDMI display directly to the
HDMI source to see if there is an image.
4) Use higher quality HDMI cables.

10
Specifications

11
Disclaimer
The product name and brand name may be
registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for
reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without
prior notice to a product or system described
herein to improve reliability, function, or design.

Thank you for choosing gofanco
www.gofanco.com