gofanco USBCVXP2VID User manual

USB-C to mDP & HDMI VXP
Video Adapter with PD 3.0
User's Guide
G4-0089A
P/N: USBCVXP2VID

2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
[email protected]. For drivers/manuals
download, please go to www.gofanco.com/
downloads.
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to rain, heavy
moisture, or liquid
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating

3
Introduction
gofanco's USB-C to mDP & HDMI VXP Video
Adapter with PD 3.0 transforms a single USB-C
port into dual video outputs and single PD 3.0
charging port.
Features
•Transforms a single USB-C port with
DisplayPort Alternate (DP Alt) mode or
Thunderbolt 3 technology into 2
simultaneous video outputs
•Supports single DisplayPort 4K@60Hz
(max) or single HDMI 4K@30Hz (max)
•Supports VXP (View Xpanding) panoramic
video wall configuration (requires two 4K
displays)
•Supports PD 3.0 technology, provides up to
60W power to charge/power Laptops,
Notebooks, and many other USB-C devices
PackageContents
•USB-CtomDP&HDMI VXPVideoAdapter
with PD 3.0
•mini DisplayPort to DisplayPort adapter
•User's guide

4
Installation Requirements
•An available USB-C port with DP Alt mode
or Thunderbolt 3 technology
•Windows®10 / 8.x / 7 (32-/64-bit)
•Mac OS®10.13 or later
Product Layout
1. USB-C PD 3.0 port: Connects to a USB-C
power adapter up to 60W. *Note: The
computer and power adapter must support
PD 3.0 specification, otherwise the adapter
will reset when power delivery is
disconnected
2. mini DisplayPort Out: Connects to a
DisplayPort display
3. HDMI Out:Connects to an HDMI display
4. USB-C In: Connects to a USB-C computer

5
Hardware Installation
Important: The source USB-C output must
support DisplayPort Alternate (DP Alt) mode or
Thunderbolt 3 technology for the video adapter
to work properly. Please verify DisplayPort
Alternate mode over USB-C or Thunderbolt 3
with your computer manufacturer.
1. Power off all devices you plan to connect to
the video adapter.
2. Connect the video adapter to your system's
USB-C connector, the drivers will install
automatically, no additional driver
installation is needed.
3. Connect your displays to the video
adapter's video outputs.
4. The adapter is ready for use.

6
Important Notes
• Supports single DisplayPort 4K@60Hz
(max) or single HDMI 4K@30Hz (max)
• The adapter acts as a splitter when
connecting1080p displays,thesame content
will be shown on all displays
• Two 4K displays are required for VXP
panoramic video wall configuration
• VXP mode uses the HDMI display's EDID,
the HDMI display will always show on the
left side of the video wall
• VXP mode allows both displays to play
audio simultaneously
• Does not support Extended desktop for the
2 video outputs
• The computer and power adapter must
support PD 3.0 specification, otherwise the
docking will reset when power delivery is
disconnected

7
Disclaimer
The product name and brand name may be
registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for
reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without
prior notice to a product or system described
herein to improve reliability, function, or design.

Thank you for choosing gofanco
www.gofanco.com