gofanco Matrix44HD2-BSC User manual

4x4 HDMI Matrix
4K60Hz BSC
User's Guide
G4-0150A
P/N:Matrix44HD2-BSC

2
Thank you for purchasing from gofanco. Our products
aim to meet all your connectivity needs wherever you
go. For optimum performance and safety, please read
the instructions carefully and keep this User's Guide for
future reference. If you need more information about
our products, please visit www.gofanco.com. For
technical support, email us at [email protected].
For drivers or manual download, please go to
www.gofanco.com/downloads.
Important Safety Notices
Pleasereadsafetyinstructionscarefullybeforeinstallation
and operation.
• Please pay close attention to all warnings and hints
for this device
• Do not expose this unit to rain, heavy moisture, or
liquid
• Do not put any items into the device or attempt to
modify its operation
• Do not repair the device or open the enclosure
without professional guidance to avoid electric
shocks. Doing so may void your warranty
• Keep the product in a well-ventilated location to
avoid damage from overheating
• Shut off power and make sure environment is safe
before installation
• Do not plug the HDMI cables in/out when the
device is in use to avoid cable damage. Make sure
they are plugged into the correct ports
• Use the included 5VDC power adapter only. Make
sure the specification matches if using 3rd-party
DC power adapters

3
Introduction
The 4x4 HDMI Matrix 4K60Hz BSC allows you to connect
up to four HDMI source devices and independently
switch any source to any of the four HDMI displays.
Features
• Supports up to 4K@60Hz YUV 4:4:4 8-bit, HDR,
HDCP 2.2/1.4, 18Gbps
• Supports LPCM 7.1/5.1, DTS/DTS-Audio, Dolby
Digital Plus/Dolby TrueHD 7.1/Dolby Digital 7.1/
Dolby Atmos
• 4K to 1080p auto downscaling on any two outputs
to support mixed 4K & 1080p displays
• Control methods: Panel buttons, IR remote, RS232
commands
• EDID management: Built-in EDID, EDID learining
• Lightning, surge, and ESD protection
Installation Requirements
• HDMI source devices (DVD player, set top box, PC,
etc.)
• HDMI displays (SDTV/Monitor, HDTV/Monitor,
projector, etc.)
• HDMI cables (not included)
PackageContents
• 4x4 HDMI Matrix 4K60Hz BSC
• IR remote control
• Mounting accessories
• Power adapter
• User's guide

4
Product Layout
Figure 1: Product Layout
1. Power LED: On when the matrix is powered on
2. IR Window: Receives IR signals from the included
remote control
3. RS232: For PC RS-232 control
4. EDID Dip Switch: Selects display resolution
5. Input LED 1-4: Displays the active HDMI input for
the respective HDMI output port
6. Input Selection Button 1-4: Press to select the
HDMI input to display on the respective HDMI
output port
7. Power Jack: Connects to the included power
adapter
8. HDMI In (1-4): Connect to your HDMI sources
using HDMI cables (HDMI cables not included)
9. HDMI Out (1-4): Connect to your HDMI displays
using HDMI cables (HDMI cables not included)

5
Hardware Installation
1. Power off all devices including your HDMI
source(s) and HDMI display(s).
2. Connect your HDMI source devices to the Matrix's
HDMI In connectors with HDMI cables (HDMI
cables not included).
3. ConnectyourHDMIdisplays to the Matrix'sHDMI
Out connectors with HDMI cables (HDMI cables
not included).
4. Plug the included power adapter into the Matrix's
Power Jack, then plug the power adapter into a
reliable power outlet.
5. Power on all connected devices. The Matrix is
ready for use.
Matrix Device Control
Input Selection Buttons
Use the Input Selection Buttons (1-4), located on the front
panel, to select any of the 4 HDMI sources to display on
any of the 4 HDMI displays.
•Select an input source to display on an output port:
Example: To select Input 1 source to display on
Output 1 port - Press Output 1's Input Selection
button 1 (see #6 on page 4) until Input LED 1 (see #5
on page 4) is solid on.

6
Remote Control
Users can control the Matrix 4K using the included IR
remote control. Point the remote control towards the
built-in IR receiver window located on the front panel.
Output 1: Input Select Buttons (1-4)
Next Button
(Output 1-4)
Back Button
(Output 1-4)
Output 2: Input Select Buttons (1-4)
Output 3: Input Select Buttons (1-4)
Output 4: Input Select Buttons (1-4)
• Back Button (Output 1-4): Press to select the previous
input source for this display (output)
• Next Button (Output 1-4): Press to select the next input
source for this display (output)
• Input Select Buttons (1-4): Press to select an input source
for this display (output)

7
RS232 Control
Connect the 4x4 Matrix to a PC using an RS232 cable
(cable not included).
COM Port Setting
Baud Rate: 9600 bps
Data Bits: 8
Stop Bits: 1
Parity: None
RS232 Command List
Use any RS232 terminal program of your choice, such as
Hyperterminal for RS232 control.

8
RS232 Command List Continued
Application Diagram
The application diagram shows the most typical input
and output devices used with the 4x4 HDMI Matrix
4K60Hz BSC.
Figure 2: Application Diagram

9
EDID Management
Allows you to choose the output EDID. There are 16
built-in EDIDs.
DIP Switch Position
0 = Down
1 = Up
EDID Table
• Note: 4K to 1080p auto downscaling on any two
outputs to support mixed 4K & 1080p displays

10
Specifications

11
Disclaimer
The product name and brand name may be registered
trademarks of related manufacturers. TM and ® may be
omitted on the user's guide. The pictures on the user's
guide are just for reference, and there may be some
slight differences with the actual products.
We reserve the right to make changes without prior
noticetoa product or systemdescribedherein to improve
reliability, function, or design.

Thank you for choosing gofanco
www.gofanco.com