Goldair GELUB-Q User manual

!"#$%&'()%#$%*+,%-)$%
%
&*)'$)%&-#.!%/-+0%
12+3)-4%'-!,+-5%/#*)%
&-+3#6)6%

TECHNICAL SPECIFICATION
Supply: 220-240VAC 50Hz
Wattage: 2 x 60W GELUB-Q, GELUB-K, GELUB-SK
General Care and Safety Guide
1. Use only the voltage specified on the rating
label of the Electric Blanket.
2. It is recommended that this heater is plugged
directly into the wall socket. Power boards are
not rated to supply power to high wattage
appliances.
3. A correctly specified, undamaged extension
cord may be used with this heater provided it is
used in a safe manner.
4. Do not operate this Electric Blanket with a
damaged cord, plug or after the Electric Blanket
malfunctions in any manner. Return to a
qualified electrical person for examination,
electrical service or repair.
5. This Electric Blanket is intended for household
use only and not for commercial or industrial
use.
6. Use this Electric Blanket only as described in
this manual. Any other use is not recommended
by the manufacturer and may cause fire,
electrical shock or injury.
7. Do not operate with cord set coiled up as a heat
build up is likely, which could be sufficient to
become a hazard.
8. Do not use heavy or dense over blankets as
they may lead to overheating of the Electric
Blanket.
9. Do not trap or fold cords between bed slats,
mattress, or springs, or against walls,
headboards or bed frame as this may cause
damage to the cord. Check regularly to ensure
your cord hasn’t been compromised.
10. Do not pinch, flex, or expose the heating wire.
Damaged heating wire may cause a fire hazard
or personal injury.
11. Do not use the Electric Blanket on a bed used
by an infant, incapacitated person, paraplegic,
quadriplegic, diabetic, anyone sensitive to heat
or anyone who can not clearly understand the
instructions and/or operate the controls.
12. This Electric Blanket is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Electric Blanket by a
person responsible for their safety.
13. This product is not intended for medical use in
hospitals.
14. The power cord must be routed to prevent being
sat on or rolled on when getting in and out of the
bed.
15. Do not use this product on a damp mattress or
on a water bed.
16. If you find any damage to your Electric Blanket,
if your Electric Blanket does not work, or is not
working properly, contact the place of purchase
or the Goldair Customer Services Team.
17. Repair work on the Electric Blanket by
unqualified persons can cause serious risk to
the user.
18. There are no user serviceable parts installed in
the Electric Blanket.
19. Do not use on an adjustable bed.
20. Turn off the Electric Blanket and disconnect the
power cord when not in use.
21. Do not dry clean the Electric Blanket. Do not
use bleach or harsh cleaning fluids as the
cleaning liquid may damage the insulation of the
heating element.
22. Do not use any pins, needles, safety pins or
other sharp items on your Electric Blanket as
they will damage the electric wiring.
23. Keep all dogs, cats, and other pets away from
the Electric Blanket.
24. Do not tuck in the Electric Blanket as this may
cause over heating and/or fire.
25. The Electric Blanket can be used only with the
Electric Blanket control provided by the
manufacturer. Any other Electric Blanket control
may cause overheating and/or fire.
26. Indoor use only.
27. Children should be supervised to ensure that
they do not play with the Electric Blanket.
28. Do not unplug the product by the power cord
while in use. Always turn the power off at the
power outlet before you remove the plug.
Remove by grasping the plug; do not pull on the
cord.
29. Never sleep with the blanket on in a heat
position.
30. The blanket must not be powered on when
folded. Always ensure the blanket is laid flat
without kinks or overlaps.
Thank you for choosing a Goldair Electric Blanket. This Goldair Electric Blanket
has been designed and manufactured to high standards of engineering and with
proper use and care, as described in this leaflet, will give you years of useful
service. Please read these instructions carefully.

Overview of Goldair Electric Blanket
Your Goldair Electric Blanket is equipped with two 9 Heat Controllers.
OPERATING INSTRUCTIONS
1. You can program your Electric Blanket to work
for 1-9 or 12 hours and with 1-9 heat settings
2. Plug into the mains power supply and switch on
the power mains
3. Switch on the Electric Blanket with “On/Off”
button. The blanket will come at a default setting
of 0 heat and 1 Hour timer.
4. The LED for timer and temperature will be
illuminated.
5. By pressing the Temp button you will be able to
adjust the heat settings from 1–9. 1 being lowest
and 9 being highest. This will be indicated with the
left LED.
6. You can also set the timer to turn the Electric
Blanket off after a predetermined time being 1-9
hour or 12 hours. By pressing the Timer button
you will be able to adjust the number of hours
from 1-9 (press once for each hour), pressing one
more time will show “H” illuminated on the heat
controller which indicates the timer is set to 12
hours. This will be indicated with the right LED.
NOTE: Children under the age of 3 are not to use
this appliance due to their inability to react to heat.
NOTE: This appliance is not to be used by young
children over the age of 3 unless the controls
have been pre-set by a parent or guardian, or
unless the child has been adequately instructed
on how to operate the controls safely.
NOTE: When lying on the Blanket some people
may experience a tingling sensation whether
alone or when touching someone else lying on the
Blanket.
This “tingling sensation” is known as an electric
field effect and caused by the current flowing
through the elements creating an Electromagnetic
Field (EMF). Some people may be more sensitive
to feeling the EMF tingling sensation than others.
It is known to occur across all makes and models.
This is no cause for concern and is in no way an
electric shock.
BEFORE FIRST USE
Before using your Electric Blanket for the first
time:
1) The Electric Blanket needs to be unfolded
and laid flat before switching on.
2) We recommend that you switch your Electric
Blanket to the maximum setting for two to
three hours before bedtime then reduce to
your desired heat setting 15 minutes before
getting into bed, you must switch OFF prior
to sleeping.
EVERYDAY USE
With normal use your Electric Blanket will require
15 minutes of preheating before bedtime.
IMPORTANT: Your Electric Blanket is designed to
pre-heat your bed. Never sleep with Electric
Blanket turned on.
LED Readout
Timer Button
On/Off Switch
Temperature
Button
Important instructions: Retain for future use.
9 HEAT CONTROLLER
The control features an on/off switch and two
buttons to control the heat settings and the timer.
It also has an LED readout for temperature and
timer settings.
Not to be used by very young children (0-3 years)

FITTING YOUR GOLDAIR ELECTRIC BLANKET
Place the Electric Blanket on the mattress with the elastic strap side facing down.
Ensure the end of the Electric Blanket with controls is at the top end of the bed.
Once the Electric Blanket is in the correct position attach the elastic straps by pulling them
down and securing them around the corners of the mattress.
Connect the Electric Blanket controls into the sockets on the Electric Blanket and plug into a
power point and turn on. The cord and control switches must be kept outside the bed and
away from external heating sources, such as heaters or bedside lamps. The power cord must
not be bent over the edge of the bed.
The power cord must be positioned to prevent being sat on or rolled on when getting in or out
of the bed. If the power controller cord is sat on or trapped between the bed edge and the user
on a regular basis it will be damaged over time resulting in premature failure or fire.
FITTED BLANKET FEATURES AND BENEFITS
• Fitted Design - fitted elastic keeps the Electric Blanket flat and taut on the mattress and makes it
easy to fit and remove from the bed.
• Machine Washable - the detachable controls and waterproof element make your Electric
Blanket safe to machine wash and tumble dry. For instructions on how to launder your Goldair
Electric Blanket refer to Care & Cleaning section.
• 9 Heat Control - a choice of 9 heat settings allows you to select the temperature to best suit
your comfort level.
• Detachable Controls - remove the controls when laundering your Electric Blanket.
• Dual Controls – The Electric Blanket features two heat controls for personalised heating.
Fitting your Goldair Electric Blanket

Care and Cleaning of your Goldair Electric Blanket
SUPPORT AND TECHNICAL ADVICE
CARE & CLEANING OF YOUR ELECTRIC
BLANKET
Taking care of your Electric Blanket is easy and
safe as long as you follow the steps outlined
below:
!DO!NOT!DRY!CLEAN!
!
!DO!NOT!IRON!
!
!DO!NOT!BLEACH!
• DO NOT use a wringer.
• DO NOT turn on the Electric Blanket until
it is completely dry.
• DO NOT use mothballs or sprays of any
kind.
SPOT CLEANING
• Unplug and remove the controls to the
Electric Blanket.
• Wet sponge the affected area using a mild
soap and lukewarm water solution. Ensure
the water temperature is less than 30°C.
• Gently sponge the affected area with clean
water.
• Use a neutral coloured towel to absorb
excess water.
HAND WASHING
Fold and presoak the Electric Blanket
for 15 minutes in a mild soap and
lukewarm water solution. Ensure the
water temperature is less than 30°C.
• Gently squeeze the soap suds through for
a few minutes.
• Rinse in fresh lukewarm water.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
AIR DRYING
• Gently stretch the Electric Blanket to its
original size.
• Air dry over a clothes line or shower rod.
(DO NOT use clothes pegs or clips of any
kind).
• DO NOT use the Electric Blanket until it is
completely dry.
MACHINE WASHING
Unplug and remove the Electric Blanket controls.
Fold and presoak the Electric Blanket
for 15 minutes in a mild soap and
lukewarm water solution. Ensure the
water temperature is less than 30°C.
• Wash in mild soap and lukewarm water on
the delicate or gentle cycle for 2 minutes.
• Rinse in fresh lukewarm water.
MACHINE DRY
Place the Blanket into the dryer and
tumble dry on low setting until damp.
Approx 30 minutes
• Remove the Blanket while it is still damp and
gently stretch to its original size.
• Continue to air dry over a clothes line or
shower rod. (DO NOT use clothes pegs or
clips of any kind).
• Do not use the blanket until it is completely
dry
DO NOT USE IF MOIST OR WET
STORING YOUR ELECTRIC BLANKET
Always allow the Electric Blanket to cool before
storing. Your Electric Blanket can be used all year
round. Simply, roll or fold it loosely and store in a
blanket bag or the bag it was supplied in. Avoid
creating sharp creases in the Electric Blanket; for
example do not store it under other items that may
result in bending the wires of the Electric Blanket.
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
Goldair – Australia
Monday – Friday 8am-5pm
Phone [phone]
Phone [phone]
[e-mail]

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in
normal domestic use for a period of two years. In non-domestic use Goldair limits the voluntary warranty to three
months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during
the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by
anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in
relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
Two Year Warranty
Goldair Two Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date Of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due!to!con5nual!design!improvements,!the!product!illustrated!in!this!User!Manual!may!differ!slightly!from!the!actual!product.!
Goldair!–!New!Zealand!
267%(89:;<=%
&+%78>%?@@AB@B%
.C$C0C2%
'DEF9;G:%
%
&H8GI%JKL%M@NO%O?B%L@@@%
&H8GI%@P@@%QRQ%KRR%
SSSCT89:;<=CE8CGU%%
Goldair!–!Australia!
267%(89:;<=%'DVW=;9<;%&WX%
&+%78>%YBL%
$8DWH%08=;GT%
3<EW8=<;Z%RBYQ%
%
&H8GI%JK?%M@NR%ORKY%Y?@@%
&H8GI%?R@@%(+*6'#-%%M?R@@%LKY%RQLN%
SSSCT89:;<=CE8[C;D%%

!"#$%&'()%#$%*+,%-)$%
%
&*)'$)%&-#.!%/-+0%
12+3)-4%'-!,+-5%/#*)%
&-+3#6)6%