Goldair PLATINUM GPOC4115 User manual

10 Fin Oil Column Heater with Wifi
Operating Instructions
Model: GPOC4115

CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
•This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they are supervised or have been given instruction
concerning the use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the
appliance.
•If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this appliance. Covering this appliance
presents fire risk and will activate the safety fuse; permanently disabling the
unit.
WARNING: Do not use this appliance in small rooms when they are
occupied by persons not capable of leaving the room on their own, unless
constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
flammable material a minimum distance of 1 metre from the air outlet.
General Care and Safety Guide
•Use only the voltage specified on the rating label of the appliance.
•Keep all objects at least 1 metre from the front, sides and rear of the
appliance.
•This appliance is intended for household use only and not for commercial or
industrial use.
•Indoor use only.
•Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or
injury.
•Do not use the appliance if it has been dropped or damaged.
•The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

•Never use the appliance to dry clothes.
•Always unplug appliance when not in use.
•When the appliance has been unpacked, check it for transport damage and
ensure all parts have been delivered. If parts are missing or the appliance has
been damaged, contact the Customer Services Team.
•Do not use if there are visible signs of damage to the appliance.
•Do not connect the appliance to mains supply until completely assembled and
adjusted.
•Ensure hands are dry before handling the plug or main unit.
•Ensure appliance is on a flat, stable, heat-resistant surface.
•Do not operate with cord set coiled up as a heat build up is likely, which could
be sufficient to become a hazard.
•Carry out regular checks of the supply cord to ensure no damage is evident
•Do not operate this appliance with a damaged cord, plug or after the appliance
malfunctions or has been dropped or damaged in any manner. Take to a
qualified electrical person for examination, electrical service or repair.
•Do not twist, kink or wrap the cord around the appliance, as this may cause the
insulation to weaken and split. Always ensure that all cord has been removed
from any cord storage area and is unrolled before use.
•It is recommended that this appliance is plugged directly into the wall socket.
Power boards are not rated to supply power to high wattage appliances.
•A correctly specified, undamaged extension cord may be used with this
appliance provided it is used in a safe manner.
•Do not remove plug from power socket until the appliance has been switched
off.
•Do not remove plug from power socket by pulling cord; always grip plug.
•Do not place cord under carpet or cover with rugs or furniture. Arrange the cord
so it cannot be tripped over.
•Don’t place appliance on bedding or on thick & long carpet where the openings
may get blocked.
•Switch off and use handle provided when moving
•Do not place appliance close to radiant heat source.
•Do not insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the appliance.
•Do not sit on the appliance.
•Do not use abrasive cleaning products on this appliance. Clean with a damp
cloth (not wet) rinsed in hot soapy water only. Always remove plug from the
mains supply before cleaning.
•Do not operate in areas where petrol, paint or other flammable liquids are used
or stored.
•Do not use this appliance in the immediate surrounds of a bath, a shower, or a
swimming pool or other liquids.
General Care and Safety Guide

•The appliance must not be immersed in any liquids.
•There are no user serviceable parts installed in the unit.
•Do not place the unit in wardrobes or other enclosed spaces as this may cause
fire hazards.
•This unit is not supposed to be used in or around locations where foodstuffs,
works of art or delicate articles of science, etc. are stored.
•If your appliance does not work, or is not working properly, contact the place of
purchase or the Customer Services Team.
General Care and Safety Guide
The remote control supplied with this appliance uses a CR2025 coin type
battery.
DANGER IF SWALLOWED OR PLACED INSIDE ANY PART
OF THE BODY
WARNING!
Button/Coin Cell Batteries are hazardous and must be kept out of reach of
children at all times, whether the battery is new or used. These batteries
can cause severe or fatal injuries in 2 hours or less if swallowed or placed
inside any part of the body. Dispose of used batteries immediately.
If it is suspected a button/coin cell battery has been swallowed or placed
inside any part of the body, seek medical attention immediately or for 24/7
fast, expert advice, contact
Australian Poisons Information Centre on 13 11 26
New Zealand National Poisons Information Centre on 0800 764 766
THIS PRODUCT CONTAINS
BUTTON/COIN CELL BATTERIES
KEEP OUT OF REACH
OF CHILDREN

Assembly
Before first use you need to set the castor wheels to the widest position. To do this
slide each wheel out from the main body until they cannot go any further and then
tighten the screws to lock them in position. Repeat this for the rear castors.
Castors shown below in correct operation position
WARNING: Heater must not be used without the castor plates and castors
fitted.

Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use.
Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.
Operating Your Oil Column Heater

Operating Your Oil Column Heater
CONTROL PANEL
A. Thermostat button
B. + Temperature & hours increase button
C. Power/Mode button
D. Timer button
E. －Temperature & hours decrease button
F. Power/stand-by button
REMOTE CONTROL
Check that the heat control switch is set to Off position before plugging the heater
into the mains supply.
Press the On/Off switch located on the side of heater to the 'I' ON position.
A beep will sound and the symbol will illuminate on the control panel.
Press the stand-by button (F) once to exit standby mode and start the heater in
ECO heat mode. ECO will show on the screen.
a b
c
f
The remote control supplied with this
appliance uses a CR2025 coin type battery.
DANGER IF SWALLOWED OR PLACED
INSIDE ANY PART OF THE BODY

Press the Power/Mode (C) button and the heater will cycle through ECO,
HIGH MED and LOW modes.
In the LOW, MED and HIGH modes the heater will continue to run uninterrupted as
the thermostat does not work in these modes.
SETTING THE TEMPERATURE
Press the thermostat (A) button and the temperature digits will blink.
Use the '+' and '-' buttons to set your desired temperature from 10-30 degrees
Celsius.
After the desired temperature is set the temperature digits will stop blinking and
the set temperature will be displayed.
The heater will change to ECO mode.
When the heater reaches the set temperature it will switch on and off
automatically to maintain the set temperature.
TURNING HEATER OFF
Press the stand-by button [F] until sleep mode is selected and the control panel
screen goes off.
Press the on/off switch [F] to turn the appliance off completely.
To disconnect the appliance, remove the plug from the socket.
Operating Your Oil Column Heater
CONTROL PANEL
A. Thermostat button
B. + Temperature & hours increase button
C. Mode button
D. Timer button
E. －Temperature & hours decrease button
F. Power/stand-by button

SET THE TIMER TO AUTO-ON
This function provides a delayed start option and should only be set if you want
the heater to automatically turn ON after a certain period of time (1 to 24 hours
from the time the function is set).
Press the on/off power switch [F] to turn the appliance on. The light on ( ) will
turn on. The appliance will be in Stand-by mode.
Press the Timer button(d), the light on (H) will turn on, and the start hour digit
(0.0) will blink.
Use the '+' and '-' buttons [b] and [e] to set the heater operation time between 1
and 24 hours in 1 hour increments. This function will activate once the hour digit
stops blinking. The count down digits will show on the display.
The heater will automatically turn on when the time runs out.
NOTE: After setting the auto-on timer, set your power and ECO mode settings. And
under ECO mode, make the temperature settings. So that the heater will turn on
at the desired temperature or power setting.
Note : When using timer modes, consideration should be given to the fact that the
heater may come on whilst unattended. Always follow the safety instructions
provided.
Operating Your Oil Column Heater
SET THE TIMER TO AUTO-OFF
This function should only be set if you want the heater to automatically shut off
after a certain period of time(1 to 24 hours from the time the function is set).
When heater working, press the Timer button(d), the light on(H) will turn on, and
the start hour digit (0.0) will blink.
Use the '+' and '-' buttons [b] and [e] to set the heater operation time between 1
and 24 hours in 1 hour increments. This function will activate once the hour digit
stops blinking. The count down digits will show on the display.
The heater will automatically shut off when the time runs out.

WiFi –Downloading and Setting up APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is
2.4GHz capable
Note this device will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.
•Tap REGISTER near the bottom of the screen.
•Read and agree to the Privacy Policy.
•Add your email address.
•Tap 'Obtain verification code'
You will then receive an email with a verification
code.
Download Goldair mobile APP
•Open the APP Store or Google Play on your mobile phone.
•Open 'Search' and enter 'Goldair'
•Click 'GET' and begin to download and install.
Once downloaded to your phone open the APP
•Enter the verification code from your email.
•Create a password.
•Then tap confirm.
If you haven't received a verification code via
email, tap the resend button and when the
verification code is received follow above steps.
Your APP is now registered and ready for pairing
to your device.

Pairing APP to Device
Details for pairing this heater to the Goldair App can be found at the below website link.
Either scan the QR code below or enter the website into your browser.
https://www.goldair.co.nz/
goldair-app
New Zealand Products
https://www.goldair.com.au/
goldair-app
Australia Products
Pairing Mode
To connect to the Goldair app you must ensure that your device is in
pairing mode which is where the Wifi Icon is flashing.
If you want to enable WIFI mode then:
- Turn the heater on at the main
switch on the side of the heater.
- Press and Hold the Thermostat (A)
and Mode (C) buttons for 3 seconds
or until the Wifi icon begins to flash.
If you need to reset the WIFI then:
- Press and Hold the Timer (D), Minus
(E) and Mode (C) buttons for 3
seconds or until the Wifi icon
begins to flash.

SAFETY DEVICES
This appliance has three protection devices:
•Tilt Switch - this will automatically turn the appliance off if the appliance is not in
the correct operating position.
•Resettable Thermal Link - this will automatically disconnect the power to the
appliance at a pre-set overheat temperature. After cooling down it will reset and
power on again. If this occurs, investigate what is causing the appliance to overheat.
•Thermal Fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).
CAUTION: The appliance generates heat during use. Precautions must be
taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
The heater requires regular cleaning to ensure trouble free operation:
•Unplug the heater from the mains supply before cleaning.
•Ensure that the heater has been allowed to cool down completely before cleaning.
•The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
•Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.
•Never use solutions such as petrol, thinners or polishing agents.
•Ensure the heater is dry before plugging back into the mains supply.
This appliance cannot be serviced. Do not attempt to dismantle.
There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician.
When disposing of the appliance, follow the regulations concerning disposal of oil.
Operating Your Oil Column Heater
SUPPORT AND TECHNICAL ADVICE
Goldair –New Zealand
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
Goldair –Australia
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[e-mail]
PROOF OF PURCHASE
To receive warranty retain receipt as proof
of purchase.

Thank you for purchasing this Goldair Platinum product. Your product is warranted against faults and manufacture when used in
normal domestic use for a period of three years. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the
warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone
other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in relation to the
goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
Three Year Warranty
Goldair Three Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date Of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair –New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone [phone]
Phone [phone]
www.goldair.co.nz
Goldair –Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au

New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au