Goldair PLATINUM GPPH770 User manual

Electronic Inverter Panel Heater with WiFi
WiFi Instruction Manual
Model: GPPH770, GPPH780

WiFi –Downloading and Setting up APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz
capable
Note this device will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.
•Tap REGISTER near the bottom of the screen.
•Read and agree to the Privacy Policy.
•Add your email address.
•Tap 'Obtain verification code'
You will then receive an email with a verification
code.
Download Goldair mobile APP
•Open the APP Store or Google Play on your mobile phone.
•Open 'Search' and enter 'Goldair'
•Click 'GET' and begin to download and install.
Once downloaded to your phone open the APP
•Enter the verification code from your email.
•Create a password.
•Then tap confirm.
If you haven't received a verification code via
email, tap the resend button and when the
verification code is received follow above steps.
Your APP is now registered and ready for pairing
to your device.

Pairing APP to Heater
•On your phone tap 'Add Device' to connect to the device. The WiFi LED display
should be flashing when you turn the device on, however if it is not, hold down the
SWING button for 5 seconds or until the LED flashes.
•Tap 'Confirm indicator rapidly blink' on your phone.
•Choose/confirm which WiFi to connect to.
Note: your phone may pick up other WiFi signals (e.g. neighbours) so you will need
to choose.
•Enter your WiFi password
•The phone will then connect to the device. Ensure you have a good strong signal
from your WiFi router.
Note: The WiFi indicator on the device may go off during this pairing process.
•Once complete the screen showing the device has been successfully added will
appear.
•Rename your device and choose the relevant location eg Master Bedroom.
•Tap 'Completed' to continue. To add additional Goldair devices to your app, tap
'Add Device' and repeat above process.
•If the phone and device fail to connect, then you will need to try to connect again
as per the above process.
•Click on your paired device and the main control screen on your phone will appear.

Operating your Heater from the APP
Device operation screen
Change Comfort
mode target
temperature
setting (10-35°c)
Change Eco mode
temperature to a
deviation of 3-7°c
from Comfort
mode
Change Antifrost
temperature
setting (3-7°c)
Choose heat setting:
Comfort/Eco/Antifrost
Current room
temperature Power setting
Power ON/OFF
button
Choose between
AUTO and CUSTOM
mode
Turn child lock
function ON/OFF
Click to enter the
Settings screen for
further options
Click to enter
Device Settings

Operating your Heater from the APP
Change the name of your device
Change the location of your device
Change the network of your device
Device settings:
Share device with family member
Group your devices
Share device with family member:
•The person you add will need to have the Goldair APP installed
on their phone.
•Enter your family member's details to share device operation
with them.
•Tap 'Confirm' to complete the addition.
Remove family member from device:
•Tap 'Share Devices' to delete the number of the person you want
to cancel. Tap 'Confirm' to confirm.
NOTE: There can only be one user operating the device at a time.
The APP needs to be closed on all other devices to enable the
sharing to work.
NOTE: If someone else sets up their phone on the same device
without using the 'Device Sharing' the original phone will be
disconnected and the device will disappear from the device list.
Review device information
Submit feedback
Remove device from app

Operating your Heater from the APP
Submit app feedback
•If you come across an issue with your device or the app, or
wish to submit feedback, please write a thorough
description in the box provided.
•Choose the issue type from the dropdown menu, eg Device
Issues.
•Enter your contact details and the time/date that the error
occurred.
•Upload any relevant images
NOTE: As well as submitting feedback via the app, you can
contact CDB Media Ltd on the contact details located on the
back cover of this manual.
Group your devices:
Devices within the same group can be controlled simultaneously
•Under 'Create Group' setting, select all devices you wish to
group together. Click 'Save'
•Enter a group name of choice. Click Save.
You can now operate all devices within this group simultaneously.
Ungroup your devices:
•Click on to pen icon within device group
•Select 'Dismiss Group'
You have now deleted your group.

Operating your Heater from the APP
Device operation screen
Choose Brightness
mode: either 50%
or 100% (default is
at 100%)
Turn on Auto off
LCD
Turn Timer OFF
function ON/OFF
Turn Programm
function ON
(program can
only be set on
device)
Choose power level
for Custom mode (1-
5)
Click to enter
Device Settings
Turn Sound
ON/OFF
Turn Open Window
function ON/OFF
Click to choose
amount of time to
lapse before timer
turns heater OFF

New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au