Good Way VS-B-DISPLAY Manual

Read before operating.
VS-B-DISPLAY
Video Inspection
Scope Operating
and Maintenance
Instructions

VS-B 0120
2
CONTENTS
GENERAL ........................................................................................................................................ 3
IMPORTANT SAFETY INSTRUCTIONS......................................................................................... 3
IDENTIFYING PARTS...................................................................................................................... 4
GENERAL FEATURES..................................................................................................................... 5
INSTALLATION ............................................................................................................................... 6
OPERATING INSTRUCTIONS ....................................................................................................... 6
FUNCTIONS OF PHOTO FILES AND VIDEO FILES ................................................................... 7
HOW TO USE THE PLAY MENU ................................................................................................... 7
HOW TO EDIT THE SETUP MENU OPTIONS ............................................................................. 8
MAINTENANCE AND STORAGE ................................................................................................. 8
TECHNICAL INFORMATION ........................................................................................................ 8
SPARE PARTS.................................................................................................................................. 9
Thank you for purchasing this Goodway Video Inspection Scope. We appreciate
your business and look forward to serving you in the future. As with all Goodway
products, you can be assured that the nest quality components and workmanship
have gone into this machine.
Please take a few minutes to read the following Operating and Maintenance
Instructions. Please pay particular attention to the safety instructions and exercise
caution when using this equipment.
GOODWAY®TECHNOLOGIES CORPORATION
HVAC & FACILITY MAINTENANCE SOLUTIONS
For Sales Call: 1-800-333-7467
For Service Call: 1-800-370-2855

VS-B 0120 3
IMPORTANT SAFETY INSTRUCTIONS
To prevent operator injury and damage to the equipment, please read and observe the
following basic safety precautions:
Warning: Read and understand all instructions before using.
1. Keep this manual with the unit at all times.
2. Service must be performed by qualied personnel.
3. Use only Goodway specied replacement parts.
4. Do not use tool if switch does not turn it off.
5. Store idle tool out of reach of children or untrained persons.
6. Use only Goodway specied charger.
7. Use only Goodway specied battery.
8. If the machine does not operate properly or has been damaged or exposed to
water, return it to factory for service.
9. Do not point light source directly into anyone’s eyes.
10. Hold the unit tightly to avoid causing damage to the unit or someone else.
11. Do not take out the SD card while taking pictures or recording videos. This can cause
damage to the display and/or SD card.
12. No not use in a hazardous environment or near hazardous or ammable substances.
13. Do not disassemble the machine. This can cause damage to the machine or an
electric shock.
14. Do not bend the exible probe more than 150 degrees.
15. Do not touch the lens of the probe after use as it can be too hot to touch after
extended use.
16. Do not expose the display or the probe to direct sunlight.
17. Do not operate this unit while charging the battery.
SAVE THESE INSTRUCTIONS
GENERAL
The VS-B series handheld video scopes allow for clear viewing and high resolution
capture of internal surfaces of tubes, pipes and more.
WARNING

VS-B 0120
4
1. Charging Indicator Light
2. DCIN Indicator Light
3. Power/SD Card Detection
Indicator Light
4. Power On/Off
5. OK Key
6. ESC Key
7. Down Key
8. Up Key
9. Brightness Up Key
10. Brightness Down Key
11. Record Video Key
12. Picture Key
13. SD Card Slot
14. Reset Button
15. USB Connector
16. DCIN
17. TV OUT
18. ¼”-20 Threaded Screw Stud
IDENTIFYING PARTS

VS-B 0120 5
Button Video Mode Play Mode Set Up Mode
Enter setup menu Enter setup menu Execute the selected
function
Check the photo or
video saved in SD card
(enter play mode)
Back to video mode Exit the menu
Take photo Check backward
photo or video
Left key (display
model version for
2 sec.)
Start/Stop video
recording
Check forward photo
or video
Right key
Zoom in
(magnication cycle
from small to large)
X1 - X2 - X4 - X6 - X8
Play/Pause video
zoom in
Move selection to
upper one
Zoom out
(magnication cycle
from large to small)
Stop video zoom out Move selection to
lower one
LED illumination to
increasing
/ /
LED illumination to
decreasing
/ /
GENERAL FEATURES

VS-B 0120
6
INSTALLATION
Connect the 10’ (3m) or 30’ (9,1m) probe that was purchased with the VS-B-DISPLAY
unit. Verify that the probe makes a good connection with the display, and that all
buttons operate properly. If any part does not function properly, please contact
Goodway Technologies at 1-800-370-2855.
OPERATING INSTRUCTIONS
Once the main screen is turned on, there will be a live image of what is seen by the
end of the probe. When the probe’s vision is in the desired location, press either:
1. Picture Key – Take a picture of the current screen image.
2. Record Video Key – Record a video.
EDITING THE SETTINGS
To go to the menu, press the OK button while on the preview screen. In the rst
screen, you will have the option to:
1. Turn sound on/off.
2. Turn the grid on the screen on/off.
3. Turn mirror mode on/off (This will ip the image along the vertical axis).
4. Change the factory set brightness/contrast.
4a. To adjust brightness or contrast, press the Record Video Key to choose
brightness or contrast.
5. Press OK on the option that needs to be adjusted.
6. Use the Up and Down keys to adjust the selected value.
7. Press OK when the settings are correct.
8. Press ESC to exit the settings.
VIEW IMAGES/RECORDED VIDEOS
While the display show preview mode, press the ESC key to enter the le list preview.
Use the Up and Down keys to select the le, then press OK to select the le.

VS-B 0120 7
FUNCTIONS OF PHOTO FILES AND VIDEO FILES
Photo File: Video File:
Zoom In Play View
Pause Video
Stop Video
Fast Forward
Rewind
Zoom Out
View Previous
Image/Video
View Next
Image/Video
Speed Up
Video
HOW TO USE THE PLAY MENU
Once a le is selected, press the OK key again. That will bring you into the play menu.
The following options are available:
1. Delete current selection/all/select from the list
2. Slide Show 3 seconds/5 seconds/10 seconds
2a. This is only available when there are more than 2 images and videos saved.
3. Thumbnail list Execute/Cancel
3a. This will display the videos and the images in a 3x3 thumbnail view instead
of the list view with 3 options.
4. File list Execute/Cancel
4a. This will display the videos and the images in a list view with 3 options
instead of the 3x3 thumbnail view.
5. Volume 1-8
5a. The default for the volume level is 8.

VS-B 0120
8
HOW TO EDIT THE SETUP MENU OPTIONS
To access the Setup Menu, go to either the Play Menu or the Video Menu. Once in
the menu, press the Record Video Key to access the Setup Menu. In the Setup Menu,
the following will be available to edit:
1. Format Execute/Cancel
1a. This will reformat the display, deleting all saved changed to the menu
options and will delete all saved images and videos.
2. Language
3. Auto Off to 5/10/60 minutes or Off
4. System Reset Execute/Cancel
5. TV Output NTSC/PAL
6. Date Input Off/Set
6a. To set the date, select the set option. Once on the new screen, us the Picture
and Record Video keys to toggle between options, and use the Up and
Down keys to adjust the values. Then press OK to conrm settings.
7. USB PC-CAM/Disk Driver
MAINTENANCE AND STORAGE
Before and after operation, wipe down the display and housing with a 75%
alcohol wipe. Store in a dry, well-ventilated area.
TECHNICAL INFORMATION
Specications
Screen Size 3.5” (8.9 CM) LCD Display
Resolution 720x640 pixels
Image Format JPEG
Video Format MPEG4/AVI
Languages English/French/German/Italian/Spanish/
Portuguese/Traditional Chinese/Simplied
Chinese/Japanese/Russian/Korean/Dutch/Arabic/
Czech language/ Polish/Turkish/Croatian
USB Port 1.1/2.0
Storage 4GB SD Card (will support up to 32GB)
Power Charger 100-240V AC to 5V DC
Battery Built-in rechargeable Lithium-Ion
Dimensions 4.6” x 9.2” x 2.2” (11.7cm x 23.4cm x 5.6cm)
Working Temp -4˚F to 140˚F (-20ºC – 60ºC)
Working Humidity Less than 85%
Max Operating Altitude 6500 ft. (1981m)

VS-B 0120 9
SPARE PARTS
Part Number Description Image
VS-B-10-PROBE
VS-B-30-PROBE
Probe, 10' (3m) Length
Probe, 30' (10m) Length
VS-B-30-REEL Reel, for 30' (10m) Probe
VS-B-90DEG Lens, 90 Degree Mirror
VS-B-CHARGER Charger, VS-B
VS-B-PROBE-TIP Tip, Thread Protector
VS-B-DISPLAY Video Monitor Only

Provides innovative maintenance solutions for a wide variety
of industries including commercial HVAC, food and beverage
processing, power generation and manufacturing.
HVAC & FACILITY MAINTENANCE SOLUTIONS
For Sales Call: 1-800-333-7467
For Service Call: 1-800-370-2855
GOODWAY®TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: [phone] · Toll-Free Tel: [phone]
Fax: [phone] · Toll-Free Fax: [phone]
Email: [e-mail]
Visit: www.goodway.com
P/N MNL-VS-B
©Copyright 2020 Goodway Technologies Corp., Stamford, CT USA
Effective date May 20, 2020
Goodway is a Trademark of Crossford International.
Goodway reserves the right to improve products; contact the factory for the latest conguration and uses.