Goodmans GLCD15DVD User manual

GLCD15DVD
PP
15”LCD TELEVISION
WITH DVD PLAYER
User Guide

PACKING LIST
Parts QTY
LCD TV 1
Remote Control 1
Operation Manual 1
12 Volt AC Power Adapter
AAA Batteries for remote control
2
1
TABLE OF CONTENTS
Packing List .....................................................................1
Safety Precautions ..........................................................2
Identification of Controls ..................................................4
Connecting.......................................................................7
General Function ............................................................11
Function Selection Menus ...............................................12
Specifications...................................................................22
.1.
SS-1556DVD
Tuning...............................................................................9
Teletext............................................................................10

.2.
Instruction Manual
BEFORE YOU BEGIN...
Before you begin to use your new TV set, it is important that you read through this entire
manual,Please retain it for future reference.
Customer Record
You will find the model number and chassis number of your TV on the back of your TV set.Record these numbers
in the space provided below. Refer to them whenever you call Digital customer service or your dealer regarding this product.
Model Number: ____________________________ Chassis Number: _____________________________
Safety Precautions
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PART INSIDE.REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning symbol in the triangle tells you
that the voltage inside this product may be
strong enough to cause an electric shock .
The exclamation point in the triangle tells you
that important operating and maintenance in st
ructions follow this symbol.DO NOT TRY TO
SERVICE THIS PRODUCT YOURSELF.
!
Please carefully study this manual and always keep it available. There are, however, some installation
and operation precautions which you should be aware of.
1.Read Instructions - All the safety and operating instructions should be read before the product is operated.
2.Power/Signal Cord - The cords should be routed so that they are not likely to be walked on or pinched by itemsplaced upon or
against them.
3. Overloading - Do not overload wall outlets, extension as this can result in a risk of fire or electric shock.

4.Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock.Never spill liquid of any kind on the product.
5.Cleaning - Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaner s.Use a damp cloth
for cleaning or use a specified cleaner for LCD. Never power on LCDTV before the LCD panel dries.
6.LCD Protection - Never scratch or hit the LCD, otherwise it will cause damage to the panel which will not be covered under the warrenty
7.Remote Control - Do not , drop, moisten or disassemble the remote control, do not mix the old battery with new one, or dispose
of in fire or water.Take the batteries out when they are exhausted or unused for a long time so as to avoid liquid leakage causing
damage to the remote.
8.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.Unplug this product from the wall outlet and refer servicing to qualified
service personnel.
.3.
Instruction Manual
given.
BLUE
BROWN
•The blue wire must be connected to the terminal marked with the letter N or coloured black.
•The brown wire must be connected to the terminal marked with the letter L or coloured red.
•No connection must be made to the earth terminal inside the Plug
This symbol indicates that the AC adaptor is Class II double insulated and that an earth connection
is not required.
Electrical Information (Mains Plug)
Make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This unit may be fitted with a
nonrewireable plug. If you need to change the fuse in a non-rewireable plug, the fuse cover must be refitted. If the fuse cover is lost
the plug must not be used until a replacement is obtained. If the plug has to be changed because it is not suitable for
or it becomes damaged, it should be removed and an appropriate plug fitted following the wiring instructions below.
plug must be disposed of safely, as insertion into a mains socket is likely to cause an electrical hazard.
As the colours of the wires in the mains lead of this unit may not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
CAUTION: IF A 13 AMP (BS1363) PLUG IS USED, A 3 AMP
FUSE (BS1362) MUST BE FITTED.
The plug wiring information refers to the mains cord that is connected to the supplied AC adaptor. This product must not be connected
directly to the mains supply but is connected via a 12 Volt AC adaptor.
or damaged,
your socket,
The waste

MENU TV/AV V- P-V+ P+
2 3 4 5 6 7
IDENTIFICATION OF CONTROLS
Main unit(front view)
PP
DC Supply Input To Main Power (DC 12V Input)
Aerial input Connect to an external TV aerial
SCART Input 21-Pin Scart Terminal
Video Input Composite Video Input
Audio Input Left, Right audio Input
S Video Input S Video Input
VGA Digital INPUT Terminal
1.POWER Turns the TV On or Off
2.MENU Accesses the TV menus
3.TV / AV Used to select a signal source, TV, AV, S Video or SCART
4.V- Volume down
5.V+ Volume up
6.P- Used to select a channel down
7. P+ Used to select a channel up
1
DC Supply Input Video Input
SCART
VGA S Video Input Audio Input Aerial input
.4.
Instruction Manual

IDENTIFICATION OF CONTROLS (continued)
Remote Control
.5.
Instruction Manual
1.Slandby Button
2.AV Button
3.TV Numeric Button
4.Channel Button(P+)
5.Two Digital Program Button
*Two Digital Program Button
8.Menu Button
7.Volume Button(V-)
10.Channel Button(P-)
40.Size Button (For teletext mode)
14.*Display Button
13.*PBC Button
16.*Fast Backward Button
18.*Previous Button
45.*Play(OK)button
20.*Menu Button
21.*Setup Button
24.*Stop Button
23.*Play/Pause Button
50.*Slow Button
25.*A-B Button
26.*Repeat Button
53.*Program Button
27.Mute Button
28.*Open Button
29.TV/DVD Button
30.Recall Button
31.Swap Button
12.Sound Mode
38.Picture Wode
6.Volume Button(V+)
36.Display Mode
37.Sleep Mode
11.Mix Button
42.*Fast Forward Batton
15.*Direction Up Button
19.*Direction Down Button
17.*Direction Left Button
43.*Direction Right Button
44.*Next Button
47.*Angle Button
46.*Title Button
22.*Suv-t Button
49.*Zoom Button
48.*Auidio Button
51.*Go To Button
52.*Clear Button
9.Subc Button(For teletext mode)
32.TXT Button(For teletext mode)
33.LIST Button(For teletext mode)
34.INDEX Button(For teletext mode)
35.HOLD Button(For teletext mode)
41.REVE Button(For teletext mode)
39.CANC Button(For teletext mode)
Note:
"*" means that these controls are used only when in
DVD mode.
2345
0987
1
6
MEN U
A B REPEAT
SLO W AUDIO ZOOM
TITL EANGLESU B TSE T UP
ME NU
SIZEREVE CA NC
DISP L AY PB C
DISP LAYSLE EPPIC T U RESOU ND
NICAM/A2
SUBC
HOLD
SWAPRE CA L L
MI X
V
INDEX
P
P
MU TE
V
OK
10
AV
STA ND B Y
OPEN DV DTV
TXT LI ST
PR OGRAM CLE A R GOTO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53

.6.
PREPARING THE REMOTE CONTROL
To operate the LCD TV, you must first place the batteries in the remote control.
1. Open the cover.
2. Insert batteries (AAA size).
Make sure to match the + and - on the batteries to the
marks inside the battery compartment.
3. Close the cover.
OPERATING WITH THE REMOTE CONTROL
Operating LCD TV with the remote control.
The remote control must point at the remote sensor in order for the TV to function correctly.
* Do not face the remote sensor towards any light source such as direct sunlight.The TV may malfunction.
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
* Do not place the batteries in the wrong direction.
*It is dangerous to charge/heat/open or short-circuit the batteries.
* Do not leave dead batteries or mix old/new batteries in the remote control.
* When not using the remote control for a long duration of time, remove the batteries.When operating range becomesreduced, replace.
* If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace.
*Take out the batteries when unused for a long time of duration.
!
Instruction Manual
+
-
-
+

.7.
Connecting the TV aerial
Connecting the AC power adaptor
Connect the AC adaptor to the DC socket located at the rear of the TV. Connect the other end of the AC adaptor to
a 230VAC mains supply.
To ensure best possible TV reception connect a good quality high gain external TV aerial.
Instruction Manual
TV Aerial
Coaxial cable
S Audio Input Aerial input
DC Supply Input
standard UK 3
pin mains socket
CONNECTING

.8.
Instruction Manual
S Audio Input Aerial input
Connecting your Unit to an Audio System
Note: The following information is a guide only.
White audio left, red audio right
RCA output connections on back
of the TV to white audio left and
red audio right RCA input
connectors on audio system.
S Audio Input Aerial input
21 pin SCART connector from
Socket 1 (TV In/ Out) to 21 pin
SCART connector output on
Digital set top box.
Connecting your Unit to a Digital Set Top Box
Note: The following information is a guide only.

.9.
Instruction Manual
AUTO TUNING
This method of tuning will quickly search for and automatically store in order of reception TV stations located in your area.Make
sure that an external aerial is connected and that the TV is switched on with TV mode selected. Use the remote control to make all
the adjustments
1.Press the MENU button.
2.Press the P- button repeatedly until TUNING is highlighted.
3.Press V+ button.
4.Press P- button repeatedly until AUTO SEARCH is highlighted.
5.Press the V+ button to start the Auto Tuning. The tuning process will take awhile to complete and you will see TV stations briefly
as they are located and automatically stored in order of reception. When tuning has completed you will see the first TV station
stored behind the tuning menu. Press the MENU button twice to return the TV to its normal operation showing a TV station stored
in P1 memory location. Press the P+ or P- button to change the TV channels.
SKIP: Any noisy / unwanted stations can be removed by using the SKIP function as follows:
1.Select the noisy/unwanted TV channel using the P+/P- button.
2.Press MENU button
3.Press the P- button repeatedly until SKIP is highlighted.
4.Press the V+ button to change the SKIP state from OFF to ON.
5.Press the MENU button twice to exit the menu. The Noisy / unwanted TV station will no longer be shown when cycling through
the channels using the P+/P- button. In the same manner described above other channels can be removed.
CHANNEL SWAP
If you want to swap the channel,you should operate as the following measures:
(1)Press the "swap" button,and it will show a signal "EX ---" on the left corner of LCD panel.
(2)Input the channel number which you want to change to by press the numeric key.
(3)Press the button "V+",and the swap has been done.
MANUAL TUNING METHOD
This method of tuning will allow manual search and storage of TV stations in to your own preferred stored order.
1.Press the MENU button.
2.Press the P+/P- button and highlight CHANNEL.
3.Press the V+/V- button and selected the channel number that you wish to store the TV channel into.
4.Press the P- button repeatedly until TUNING is highlighted.
5.Press the V+ button.
6.Press the P- button repeatedly until MANUAL SEARCH is highlighted.
7.Press the V+ button to enter the tuning menu. Press the V+ button until UHF band shows.
8.Press the P+ button to select tuning direction for UP the band.
9.Press the V+ button to start the manual tuning process. The tuning will stop once a TV station is located. If this an incorrect or
noisy/non station then press the V+ button to continue the scan.
10.Once the correct TV station has been located press the Menu button twice to return the TV to its normal operation. The TV
station is automatically stored in the previously selected preset memory location.
11.In the same manner described above repeat the instructions to tune in and store other TV stations. Make sure that you change
the channel number that you want to store the next station as detailed in “3” above.
TUNING