Goodmans GTVL15W17HDVF User manual

ATV /DT V/DVD
CH.
VOL .
GUI DE
+10
EXI T
INF O INP UT
CH. L IST
MEN U
1
4
7 8 9
0
56
23
OPE N/C LOS E STO P
PLA Y/P AUS E
SEA RCH S KIP
I-I I
DVD
SLE EP
DVD
SUB TIT LE
SUB TIT LE
USB /CA RD
TIT LE
FAST T EXT
AUD IO
SET UP
ZOO M
DVD M ENU
GO TO
WITH INBUILT DVD PLAYER / USB & SD CARD SLOT

1
LCD TV User Guide
Safety Instructions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire or electric shock, do not
expose this equipment to rain or moisture.
This symbol is intended to alert the user to avoid the risk of
electric shock, do not disassemble this equipment by
anyone except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operating and maintenance instructions
in the literature accompanying the appliance.
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CAUTION
CAUTION
Invisible laser radiation when open and interlocks
defeated.
avoid exposure to beam.
CAUTION
WARNING

2LCD TV User Guide
Safety Instructions
MAINS PLUG WIRING
Electrical Information
This appliance is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply
sockets it must be removed and replaced with an appropriate plug. If the plug becomes
damaged and/or needs to be replaced please follow the wiring instructions below. The
plug removed must be disposed of immediately. It must not be plugged into a supply
socket as this will be an electrical hazard. If the fuse needs to be replaced it must be of
the same rating and ASTA approved to BS1362. If the plug is changed, a fuse of the
appropriate rating must be fitted in the plug, adapter or at the distribution board. If the
fuse in a moulded plug is replaced, the fuse cover must be refitted before the appliance
can be used.
Wiring Instructions
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring
instructions given below. In both cases ensure that the outer sheath of the cable is
firmly held by the cable clamp.
WARNING! Do not connect either wire to
the earth terminal.
This symbol indicates that this 2-core appliance
is Class II and does not require an earth
connection.
2- CORE
BLUE
(Neutral)
Cable
clamp
BROWN
(Live)
Fuse
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured
black.
The wire coloured brown must be connected to
the terminal marked with the letter L or coloured
red.
WARNING! This appliance must be earthed.
The wire coloured green and yellow must be
connected to the terminal marked with the letter E,
or by the earth symbol, , or coloured green or
green and yellow.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
3- CORE
BLUE
(Neutral)
Cable
clamp
BROWN
(Live)
Fuse
GREEN and
YELLOW
(Earth)

3
LCD TV User Guide
Safety Instructions
WARNINGS
WEEE:
This appliance is labelled in accordance with European Directive 2002/96/EG
concerning used electrical and electronic appliances(waste electrical and electronic
equipment - WEEE). The guideline determines the framework for the return and
recycling of used appliances as applicable throughout the EU.
Unqualified attempts to repair this TV are not allowed. Refer repairs to this unit
to a qualified technician only.
 Do not disassemble this unit. There are dangerous-voltage parts inside that may
cause electric shock even after power is disconnected.
Store your unit in a clean, dry environment, Unplug the unit immediately it gets
wet, and consult your servicing technician.
Always unplug the unit before cleaning it. Wipe dust off the cabinet of the unit
with clean & dry & soft cloth. Apply non-ammonia cleansing lotion onto the cloth,
not directly onto the screen.
Do not place heavy objects on top of the unit.
Avoid exposing your unit directly to sunlight or other heat sources.
Put your unit in a well-ventilated area away from high humidity.
Do not expose this TV to rain or moisture, dripping or splashing.
Safety Tips
If smoke, abnormal noise or odour comes out of your unit, unplug from the
mains supply immediately and call your dealer.
Never try to repair the your unit on your own. Always call your dealer
for repairs.
Note
This user’s manual contains for-reference-only graphics and information that are
subject to change without notice.

4LCD TV User Guide
CONTENT
CONTENTS
PREPARTION
Key Features.............................................................................................................5
Package Contents.....................................................................................................6
Setting Up Your LCD TV ...........................................................................................7
Your LCD TV..............................................................................................................8
Remote Control........................................................................................................12
INSTALLATION
Connecting a TV Cable or Aerial..............................................................................14
Connecting a VCR & Video Camera.........................................................................16
Connecting a TV box and satellite Receiver ............................................................17
Connecting an Audio Receiver . ..............................................................................18
HDMI ........................................... ............................................................................19
USING THE FEATURES
Basic Operation ......................................................................................................20
OSD Menu Operation ............................................................................................ 21
The Video Settings...................................................................................................22
The Audio Settings...................................................................................................22
The Setup Settings...................................................................................................23
The Parental Settings.............................................................................................. 24
The Screen Settings.................................................................................................24
Using The Digital TV Features.............................................................................. ...25
Using The DVD Features.........................................................................................34
SPECIFICATIONS...............................................................................................................44

5
PREPARATION
PREPARTION
DISPLAY MODES
The screen resolution has been optimized during production for the display modes listed below.
If the signal from the system equals the standard signal mode, the screen adjusts automatically. If the
signal from the system is not equal to the standard signal mode, adjust the screen resolution by referring to your video
card user guide, otherwise there may be no video.
Video signal: (VGA Standard)
Resolution (Dot X Line) Vertical Frequency(Hz) Horizontal Frequency(kHz)
640 x 480 59.94 31.46
72.80 37.86
75.00 37.50
800 x 600 60.31 37.87
72.18 48.07
75.00 46.87
1024 x 768 60.00 48.36
70.06 56.47
75.02 60.02
Various Audio/Video terminals for external equipment connection
1 set of composite A/V input terminals
1 SCART input terminals
1 set of component Video input terminals
1 VGA/ Audio input terminal
1 HDMI/Audio input terminals
1 Headphone terminal
High Definition Multimedia Interface (HDMI)
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that can carry up to 5 Gbps of
combined video and audio in a single cable. This system eliminates the cost, complexity and confusion of multiple
cables used to connect current A/V systems.
HDTV Component Video Inputs
Offers the best video quality for DVD(480p) and digital set-top-box (HD1080i, 720p) connections.
WSS(Wide Screen Scale) Function
This function can automatically convert and display any aspect ration (4:3 / Wide) TV
broadcast signal.
Built-in ATV and DTV Tuners
The built-in DTV tuner allows the reception of DVB-T broadcasting without the addition of a set-top
box.
Key Features

6PREPARATION
PREPARTION
Make sure all of the above contents are included in the package. If any items are
missing please contact your dealer.
 LCD TV
Make sure all of the following contents are included.
These items are all you need to set up and operate the LCD TV in its basic configuration.
Package Contents
 VIDEO Cable Remote Control/
AAA Batteries x 2
 Power Cord
 AUDIO Cable
 Power Adapter
ATV/ DTV/DVD
CH.
VOL.
GUID E
+10
EXIT
INFO I NPU T
CH. LI ST
MENU
1
4
7 8 9
0
56
23
OPEN /CL OSE ST OP
PLAY /PA USE
SEAR CH SK IP
I-II
DVD
SLEE P
DVD
SUBT ITL E
SUBT ITL E
USB/ CAR D
TITL E
FAST T EXT
AUDI O
SETU P
ZOOM
DVD ME NU
GO TO
 STAND
 User’s Manual

7
PREPARATION
PREPARTION
Setting Up Your LCD TV
If you prefer to mount your new TV on a wall instead of attaching it to the stand, please reference the
instructions included in the wall mounting kit (not included).
Ensure the TV stand is still attached with the bottom foam packaging material in the package.
Read all instructions before continuing with the stand installation.
a. Open the box, and make sure all necessary parts are in the box. The package contains:
b. Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the
stand onto the bottom of the LCD TV unit as shown:
c. Then push until stand into the LCD TV’s stand socket.
LCD TV STAND
S VIDEO
-
AUDIO IN
YPb Pr L R
PC VGA IN
/
HDMI
PC AUDIO IN VIDEO AUDIO IN
L R
SCART
VHF/UHFIN
DC12V IN
DIGITALOUT
S VIDEO
-
AUDIO IN
YPb Pr L R
PC VGA IN/ HDMI
PC AUDIO IN VIDEO AUDIO IN
L R
SCART
VHF/UHFIN
DC12V IN
DIGITALOUT

8PREPARATION
PREPARTION
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer
to page 15).
Connect the DC plug of the AC-DC power adapter to the DC 12V IN socket at the back of the
TV. Connect the other end of this cable to a 3 pin Power Cord.
Insert the 2 batteries supplied in remote control.
1
2
3
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the
remote, as it may suffer damage.
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
Insert two AAA size batteries.
Make sure to match the (+) and (-) ends of
the batteries with the (+) and (-) ends indicated
in the battery compartment.
Align the lower tabs of the back cover to the
remote control and squeeze the cover into
place.

Note:
INPUT button on the TV, has the same function of OK button on the remote control,can be
used as confirm button.
LED
The LED light indicates when the
LCD TV is activated.
IR
Infrared
Receiver
Turns the LCD TV on and into standby
mode.
Connects to the external
earphone for private listening.
MENU
Presses once to display the OSD (on
screen display), presses again to turn
the OSD off.
VOL. + / -
Adjusts the volume up and down.
Selects the main-menu item and change
values for items when in the OSD mode.
CH. / 
Scans up and down through channels.
Selects sub-menu item when in the
OSD mode.
INPUT
Chooses from different input signal
sources.
9
PREPARATION
PREPARTION
Your LCD TV
Front/Left /Right Side View and Controls

ITEM DESCRIPTION
1. SLOT-TYPE DVD
PLAYER
Any of the following disc types are playable on the DVD player:
CD-R, CD-RW, DVD-R, DVDRW, VCD, SVCD,DVD+R, and DVD+RW. (
DVD mode )
2. USB Allow the insertion of a USB disk, You can view digital images or movie
playout on your TV. ( DVD mode )
3. CARD READER Allow the insertion of a SD/MMC card. You can view digital images or
movie playout for MPEG1/MPEG2 on your TV. ( DVD mode )
4. PLAY/PAUSE Press to start play back or pause. ( DVD mode )
5. OPEN/CLOSE Press to open and close the disc tray. ( DVD mode )
To View USB or SD/MMC card you must select DVD mode then attach/insert USB/SD Card. Using the
remote control to navigate and to select the file shown on the TV screen within the SD/MMC Card or USB
memory disk/stick. Use the arrow/navigation buttons to rotate any JPEG / MPEG1 / MPEG2 / MPEG4
pictures.
10 PREPARATION
PREPARTION
Rear View and Sockets

9
Rear View and Sockets
5
3
42 8
1 DC 12V IN Connects to a wall outlet via the included power adapter.
2 AV1
SCART
Connect to external equipment with scart socket. This
scart input allows audio and CVBS/YC/RGB+CVBS.
RGB,S-VIDEO from an external devise to be shown on
your TV.
3 AV2
S-VIDEO/AUDIO
(L/R)
Connects to the S- VIDEO output sockets and Audio
output sockets on your video equipment.
4 AV3
VIDEO/AUDIO(L/R)
Connects to the composite A/V output sockets on your
video equipment.
5 AV4
Y, Pb, Pr /AUDIO(L/R)
Connects to the component ( Y, Pb, Pr ) video sockets
and audio ( L/R ) sockets of your DVD player, HDTV, or
video equipment.
6 AV5
VGA IN/PC AUDIO IN Connects to a PC or other devices with a VGA interface.
7 AV6
HDMI IN Connects to devices with a HDMI interface.
8 DIGITAL OUT Connects to digital out socket on external digital
audioequipment.(Only for DVB-T / DVD input sources)
9 VHF/UHF IN Connect TV aerial here.
ITEM DESCRIPTION
S-VIDEO and Video have a common audio input, if both devices are being used at the same time
audio from both will be heard at same time. Only switch on the required device to stop the mixing
of audio.
67
S VIDEO -
AU DIO I N
YPb P r L R
PC VGA I N
/
HD MI
PC A UDIO I N
VIDEO AUDI O IN
L R
SC ART
VHF/UHF IN
DC 12V IN
DIGITAL OUT
11
PREPARATION
PREPARTION
S VIDEO -
AUDIO IN
YPb Pr L R
PC VG A IN
/
HDMI
PC AUDIO I N VIDEO AU DIO IN
L R
SCART
VHF/UHF IN
DC 12V IN
DIGITALOUT

12 PREPARATION
PREPARTION
Your Remote Control
ATV/DTV/DVD
CH.
VOL.
GUIDE
+10
EXIT
INFO INPUT
CH. LIST
MENU
1
4
7 8 9
0
56
23
OPEN/CLOSE STOP
PLAY/PAUSE
SEARCH SKIP
I-II
DV D
SLEEP
DVD
SUBTITLE
SUBTITLE
USB/CARD
TITLE
FA ST TEXT
AUDIO
SETUP
ZOOM
DVD MENU
GO TO
9
8
1
7
13
6
2
3
4
14
12
11
5
10
1
2
3
4
5
6
7
8
9
10
11
Turn the LCD TV on and into standby
mode.
Mute and restore your LCD TV sound.
ATV/DTV/DVD
Press enter ATV / DTV or DVD Mode .
0-9
Select and switch to a channel by
using 0-9 buttons.
GUIDE/ +10
Press this button displays the electronic program guide
on the screen.(For DVD model)
Press this button twice to select song number
when the number over 9. ( For DTV mode )
CH. +/-
Change the channels up and down.
VOL. +/-
Increase and decrease volume.
SLEEP
Set the LCD TV sleep time.
- Press the SLEEP Button to select the number of
minutes, followed by 15, 30, 60 minutes and off.
The timer begins to count down from the number
of minutes selected.
- To check the remaining sleep time, press the
SLEEP Button once.
- To cancel the sleep time, repeatedly press the
SLEEP Button until the display off appears.
- If you turn the set off after setting the sleep
timer, the setting will be erased.
Press to skip to the beginning of the currently
played chapter or track. ( DVD mode )
Press to skip to the beginning of the next
chapter or track. ( DVD mode )
Use to advance or reverse playback rapidly.
(DVD mode )
/
Press to start playback or pause.
( DVD mode )
//
SKIP
SEARCH
PLAY/PAUSE
13
12
14
Press to open and close the disc
tray. ( DVD mode )
EXIT
Exits the OSD ( On Screen Display ) menu.
Press to stop playback. ( DVD mode )
OPEN/CLOSE
STOP

13
PREPARATION
PREPARTION
ATV/DTV/DVD
CH.
VOL.
GUIDE
+10
EXIT
INFO INPUT
CH. LIST
MENU
1
4
7 8 9
0
56
23
OPEN/CLOSE STOP
PLAY/PAUSE
SEARCH SKIP
I-I I
DV D
SLEEP
DVD
SUBTITLE
SUBTITLE
USB/CARD
TITLE
FA ST TEXT
AUDIO
SETUP
ZOOM
DVD MENU
GO TO
21
Access the TELETEXT items or
corresponding pages.
DVD SUBTITLE
Press to activate and change the subtitling
feature.(DVD MODE)
TITLE
Press the button to display the DVD title
content. (DVD MODE)
SETUP
Press to call up setup menu screen. (DVD
MODE)
DVD MENU
Press the button to display the DVD disc
menu. (DVD MODE)
16
17
18
20
15
19
MENU
Displays the OSD ( On Screen Display ) menu.
INFO
Press once displays a variety of information such as the current
channel and the input source.
Browse the disc’s information. ( DVD mode )
In DTV mode brings up Info Bar to show programme Information.
OK
INPUT
Cycle among the different input signal sources:
TV DVD AV1(SCART) AV2(S-VIDEO) AV3(CVBS) AV4(YPbPr) AV5(VGA) AV6(HDMI) DTV
Allow you to move, select, and set up
the OSD options.
/ USB / CARD
Display the main index in Teletext mode.
Press this button to switch between DVD,
Card Reader, and USB memory disk/stick.
( DVD mode )
/AUDIO
Reveal hidden information such as the answer to a
quiz in Teletext mode.
Change the audio language or audio channel.
( DVD mode )
/ZOOM
Freeze a multi-page passage on screen in Teletext
mode.
Zoom in/zoom out the displayed frame. ( DVD mode )
/GO TO
Display the top, bottom or all of page, to easily
read in Teletext mode.
Play from the desired location. ( DVD mode )
Turn on and off the Teletext function.
I-II ( NICAM )
Cycle through the TV Sound options:
MONO / DUAL / STEREO.
CH.LIST
Display all channel list&name.
SUBTITLE
Press the SUBTITLE key to display the subtitle which
is broadcast with the program on the screen.

The Power button on the front panel and also on the remote control is only used for powering up and
switching the TV to standby mode, it does not disconnect the device from the mains supply.
To completely disconnect the main voltage, please switch off the power switch on the rear of the TV, or
remove the power plug from the socket.
Unplug
from a wall
outlet
DC IN
POWER
14 PREPARATION
PREPARTION
S VIDEO
-
AUDIO IN
YPb Pr L R
PC VGA IN/ HDMI
PC AUDIO IN VIDEO AUDIO IN
L R
SCART
VHF/UHFIN
DC12V IN
DIGITALOUT
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets until all
other connections are completed.
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &white
TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
Connecting a TV Cable or an Antenna

15
PREPARATION
PREPARTION
S VIDEO
-
AUDIO IN
YPb Pr L R
PC VGA I N /
HDMI
PC AUDIO I N V IDEO AUDIO I N
L R
SCART
VHF/UHF IN
DC 12V IN
DIGITALOUT
Refer to the owner’s manual of the external equipment to be connected.When connecting external
equipment, do not connect any AC power cords to wall outlets until you have completed all the
connections.
Basic Connection: Connecting an aerial
Connect your existing TV aerial to the Aerial input socket on the TV.
The Aerial input socket can be connected with the ATV/DTV Aerial.
Connect all AC power Sources before turning on the power switch at the back of the TV.
Press the POWER button on your remote to turn on your LCD TV.
a. After connecting an aerial to your LCD TV and connecting the mains cable to the
TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light
will show on the front centre panel of the TV.
b. Press the POWER button, the red light will change to green and the First Time
Installation screen will show:
1. Make sure an aerial is fitted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefly as each channel is
received and stored in the memory. When APS is completed BBC1 will show,
press CH+/- buttons to view the other channels stored.
c. To power off press the POWER button, the green light will change to red.
Press the INPUT button and choose TV or DTV mode then press OK to select.
Insert the supplied mains cable to the mains socket located on the rear of the TV.
Connect the other end of this cable to a 3 pin mains socket.




5
TV Aerial
Aerial/75-ohm coaxial input
connect the AC-DC
adapter to the DC IN
socket at back of the TV. Unplug from a
wall outlet
DC 12V IN

16 INSTALLATION
INSTALLATION
Use an Audio cable to connect the VCR’s/ the Video Camera’s audio output sockets to
your LCD TV.
Use a S-Video cable to connect your LCD TV and VCR player/ video camera.
Use an A/V cable to connect the VCR’s/ video camera’s composite output sockets
to your LCD TV.
Use a SCART cable to connect the VCR’s SCART socket to the LCD TV ‘s SCART socket.
Connect all power SOURCEs before turning on the power switch of the LCD TV
or other connected equipments.
Press the POWER button to turn on your LCD TV.
METHOD A (AV2)
METHOD B (AV3)
METHOD C (AV1)
To watch VCR, press the INPUT button to select AV1, AV2 or AV3 .
To watch video camera, press the INPUT button to select AV2 or AV3.
Audio
(R )
Video/Audio Cable
ideo Audi
(L )
V
o
VHF/UHF IN
PC/VGA IN
DC 12V IN



5
“Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility”.
Rear of TV
Connecting a VCR&Video Camera

17
INSTALLATION
INSTALLATION
Connecting a TV Cable Box or Satellite Receiver
Method A(AV4) :
Use a Component cable to connect the Y/Pb/Pr sockets on the TV Cable Box to your
LCD TV.
Use an Audio cable to connect TV cable box’s audio output sockets to LCD TV.
Method B(AV2) :
Use an Audio cable to connect the TV Cable Box’s audio output sockets to your LCD TV.
Use a S-Video cable to connect your LCD TV and TV Cable Box.
Method C(AV3) :
Use an AV cable to connect the TV Cable Box’s composite output sockets to your LCD TV.
Method D(AV5) :
Use a VGA 15 pins cable to connect the TV Cable Box’s RGB output sockets to your LCD TV.
Use a 3.5mm socket to RCA adapter cable for connecting audio.
Method E(AV1) :
Use a SCART cable to connect the TV Cable Box’s SCART socket to the LCD TV’s SCART
socket.
Connect all power sources before turning on the power switch of the LCD TV or
other connected equipments.
Audio
(R )
Video/Audio Cable
ideo Audi
(L )
A
Pb Pr
E
VGA CA BL E
D
HDM I CABL E
F
Vo
PC/VGA IN
SATELLITE RECEIVER TV CABLE BOX
Satellite antenna
cable
VHF/UHF IN
DC 12V IN
Press the POWER button to turn on your LCD TV.
To watch programs satellite receiver, press the INPUT button repeatedly to select AV6 .
To watch TV cable box, press the INPUT button to select AV1, AV2, AV3, AV4 ,AV5.
Method F(AV6) :
Use a HDMI cable to connect the Satellite Receiver HDMI connector to your LCD TV.




5
6
Rear of TV

18 INSTALLATION
INSTALLATION
Use an audio cable to connect the audio receiver’s audio LINE IN sockets to LCD TV ‘s
DIGITAL OUT sockets. (Only for DVB-T / DVD input sources)
Press the POWER button to turn on your LCD TV.
Connect all power SOURCEs before turning on the power switch of the LCD TV
or other connected equipments.



Rear of TV
VHF/UHF IN
PC/VGA IN
DC 12V IN


19
INSTALLATION
INSTALLATION
How to connect
1. If Source Devices have HDMI Output , connect to the HDMI socket located at the rear of the TV
using the HDMI Cable supplied with your external devise. (HDMI sends Digital Video and Audio with
one cable.)
HDMI
HDMI
-This TV can accept High-Definition Multimedia Interface(HDMI) .
-This TV SET supports HDCP(High-bandwidth Digital Content Protection) Protocol for TV SET
(480p, 720p, 1080i) modes.
-When you connect to the output of an HD ready player (DVD Player, Set Top Box or PC) switch to the
AV6(HDMI) function and the TV will automatically detect the resolution used by the HDMI source.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
HDMI Cable
(not supplied with the product)
Cable sample