GoPro Omni User manual

GoPro Omni Guide
Pre-Check: Make sure all GoPro’s have been fully  charged and have formatted SD cards
1) Turn on Omni by locating camera #1
and holding “Mode” until the red light
flashes
a) The rest of the cameras should
turn on automatically, however
you can turn them on manually
if they don’t.
2) The #1 Camera controls the entire
Omni and will display a flashing “AR”
and “Array Ready” when it is ready to
be used
3) Begin recording with the top red
button on camera #1, and then stop
recording with the same button
4) Turn off the Omni with camera #1 by
holding “Mode” until the red light
flashes

5) Plug in the USB and power adapter for
it to the Animation Station. Turn on
Omni with camera #1, all the cameras
should enter USB mode. Move all
videos to be synced/stitched into one
folder on VideoHD. In other words,
the 6 .mp4 files should all be in one
location off the SD cards
6) Open AutoPano Video 3 and import
each video from the folder you just
created. It works best if you select all
6 videos for import at once
7) Make sure tools are shown by hitting
“Command+4”, then go to “Stitch
As”-->GoPro Hero 3+/4-->Stitch

8) Go to render, select settings (usually
H.264 is the best option here as it is
usually the most compatible with
various players and web players such
as YouTube, Facebook, and GoPro
VR Player