Gorenje SIVK7BTS Guide

Glass-ceramic induction built-in coking hob
MT IE GB Instructions for use, installation
and connection

309655
Glass-ceramic hob is intended for use in households.
Our products are packed in environment-friendly materials which
can be recycled, disposed of, or destroyed without imposing any
burden on the environment.
Instructions for use are intended for the user. They describe the
appliance and its operation. The instructions apply to various
types of appliances and may therefore include description of
functions that may not be available on your appliance.
The appliance must be connected in compliance with the
instructions attached to it, as well as in compliance with relevant
regulations and standards. The connection may only be
performed by a qualified person.
The rating plate indicating the basic information on the appliance
is attached to the lower side of the hob.
When the cooking hob is built-in, a kitchen furniture element that
is higher than the hob can stand next to in on one side, provided
the kitchen element on the other side of the hob is not higher
than the hob level.
Instructions for use
Instructions for
connection
Rating plate
Fire risk protection
Important warnings ........................................................3
Appliance description.................................................... 4
Use................................................................................... 9
Operation.......................................................................12
Cooking .........................................................................21
Maintenance..................................................................22
Troubleshooting ...........................................................23
Installation instructions...............................................24
Dear customer!
2
Glass-ceramic built-in cooking hob

309655
• Installation of the appliance into a kitchen worktop and its connection to the power mains and the
gas supply may only be performed by an adequately qualified technician.
• Do not leave small children unattended when the appliance is in operation. Risk of burning and
scalding!
• During cooking, the overheated fat or oil on the hob may ignite. There is a risk of burning and
fire; therefore, control the cooking process at all times.
• Do not use the cooking hob for room heating. Do not place empty pans on the hob.
• Glass ceramic hobs should not be used as a worktop. Sharp objects may cause scratches.
• Preparing food in thin aluminum of plastic containers on hot cooking zones is not allowed. Do not
place any plastic objects or aluminum foil on the glass ceramic hob.
• If there is a wall power outlet located near the hob and another appliance is plugged into it, make
sure the power cord does not come into contact with the hot cooking zones.
• Do not store any temperature-sensitive objects, materials, or substances underneath the hob,
e.g. detergents, sprays, etc.
• Do not use the glass ceramic hob if it is cracked or broken. If any visible crack appears,
immediately unplug disconnect the appliance from the power supply.
• In case of a failure of the appliance, immediately disconnect the appliance from the power mains
and contact the service center.
• Do not use steam cleaners or high-pressure cleaners to clean the cooking hob, as this may
result in an electric shock.
• The appliance is manufactured in compliance with the relevant effective safety standards.
Nevertheless, we strongly recommend that persons with impaired physical, motoric, or mental
capacity, or persons with inadequate experience or knowledge, do not use the appliance unless
attended by a qualified person. The same recommendation applies when the appliance is used
by persons of less-than-legal age.
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
3
Important warnings

309655
1 Controls for cooking zone front left
2 Controls for cooking zone rear left
3 Controls for cooking zone rear right
4 Controls for cooking zone front right
5 Reduce cooking zone power
6 Increase cooking zone power
7 Power boost sensor key
8 On / off sensor key
9 Timer function sensor key
10 Defrost function sensor key
11 Defrost function indicator
12 “Stay Warm” function sensor key
13 “Stay Warm” function indicator
14 Cooking zone power level display
15 Defrost function indicator for the selected
cooking zone
16 “Stay Warm” function indicator for the
selected cooking zone
17 Stop-Go function with indicator
18 Cooking time display for the front left
cooking zone
19 Cooking time display for the rear left
cooking zone
20 Cooking time / minute countdown display
21 Cooking time display for the rear right
cooking zone
22 Cooking time display for the front right
cooking zone
23 Safety lock (child lock) with indicator
SIVK6CTS, SIVK7BTS
4
Appliance description
Control panel

309655
1. Cooking zone Φ145mm; 2,2kW
2. Cooking zone Φ180mm; 3,0kW
3. Cooking zone Φ210mm; 3,7kW
4. Cooking zone 280x180; 3,7kW
5
Description

309655
What you should pay attention to
Induction cooking is extremely safe. Various safety devices have
been incorporated in the hob such as a residual heat indicator
and a cooking time limiter. There are nevertheless a number of
precautions you should take.
Connection and repair
• This appliance may only be connected by a qualified installer.
• Never open the casing. The casing may only be opened by the
service technician.
• Disconnect the electricity from the appliance before starting
any repair work Preferably unplug the appliance, switch
the (automatic) fuse(s) off or, in the event of a permanent
connection, set the switch in the power supply lead to zero.
During use
• Do not use the hob in temperatures below 5°C.
• This cooking appliance is designed for household use. It is to
be used for food preparation only.
• When you use the hob for the first time you will notice a “new
smell”. This is normal. If the kitchen is well ventilated the smell
will soon disappear.
• Remember that if the hob is used on a high setting the heating
time will be incredibly short. Do not leave the hob unattended if
you are using a zone on a high setting.
• Ensure there is adequate ventilation while the hob is in use.
Keep all natural ventilation openings open
• Do not allow pans to boil dry. The hob itself is protected
against overheating but the pan will get very hot indeed
and could be damaged. The guarantee does not cover any
damage caused by a pan boiling dry.
• Do not use the cooking area as storage space
• Ensure that there is several centimetres clearance between
the hob and the contents of the drawer.
• Do not keep anything combustible in the drawer under the
hob.
• Make sure that flexes of electrical appliances, such as a mixer,
cannot touch the hot cooking zone.
• The zones heat up during use and stay hot for a while
afterwards. Keep young children away from the hob during
and immediately after cooking.
• Grease and oil are inflammable when overheated. Do not
stand too close to the pan. Should oil catch fire, never try to
extinguish the fire with water. Put a lid on the pan immediately
and switch the cooking zone off.
• Never flambé food under the cooker hood. The high flames
could cause a fire, even if the cooker hood is switched off.
Safety instructions
6

309655
• The ceramic top is extremely strong, but not unbreakable.
A spice jar or pointed utensil falling on it, for example, could
cause it to break.
• Stop using the hob if a break or crack appears. Switch the
appliance off immediately, unplug it to avoid electric shocks,
and call the service department.
• Never put any metal objects such as baking trays, biscuit tins,
saucepan lids or cutlery on the cooking zone. These can heat
up extremely quickly and cause burns.
• Keep magnetizable objects (credit cards, bank cards, floppy
disks, etc.) away from the appliance. We advise anyone with
a pacemaker to consult their cardiologist before using an
induction hob.
• Never use a pressure cleaner or steam cleaner to clean the
hob.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• As soon as you remove the pan from the hob, the cooking
zone automatically stops. Accustom yourself to stop the
cooking zone or hob manually to avoid unintended switching
on of the induction hob.
• A small object like a pan that is too small (diameter of bottom
smaller than 12 cm), a fork or a knife will not be recognised by
the appliance. The display continues to flash and the hob will
not switch on.
• The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Temperature safety
• A sensor continuously measures the temperature of certain
parts of the hob. Every cooking zone is equipped with a
sensor that measures the temperature of the bottom of the
pan to avoid any risk of overheating when a pan boils dry. In
case of temperatures rising too high, the power is reduced
automatically.
7

309655
Cooking-time limiter
The cooking-time limiter is a safety function of your cooking
appliance. It will operate if you forget to switch off your hob.
Depending on the setting you have chosen, the cooking time will
be limited as follows:
Setting The cooking zone switches
automatically off after:
0 12 hours
1 8,5 hours
2 6,5 hours
3 5 hours
4 4 hours
5 3,5 hours
6 3 hours
7 2,5 hours
8 2 hours
9 1,5 hours
u 2 hours
U 2 hours
The cooking-time limiter switches the cooking zones off if the
time in the table has elapsed.
Setting The cooking zone switches
automatically to setting 9 after:
boost (P) 10 minutes
8

309655
Using the touch controls
The touch controls may take some getting used to if you are
used to other (rotary) controls. Place the tip of your finger flat on
the control to achieve the best results. You do not have to apply
any pressure.
The touch sensors only react to the light pressure of a fingertip.
Do not operate the controls with any other objects. The hob will
not switch on when your pet walks over it.
Induction cooking
• Induction cooking is fast
- To start you will be surprised by the speed of induction
cooking. Especially at higher settings, foods and liquids will
boil very rapidly. It is best not to leave pans unattended to
avoid them boiling over or boiling dry.
• The power will be adjusted
- In the case of induction cooking, it is only the part of the
zone on which the pan stands that is used. If you use a
small pan on a large zone, the power will be adjusted to the
diameter of the pan. The power will thus be lower and it will
take longer before the food in the pan comes to the boil.
Attention
Grains of sand may cause scratches which cannot
be removed. Only put pans with a clean base on the
cooking surface and always pick pans up to move
them.
Do not use the hob as a worktop. Always keep the lid
on the pan when cooking, in order to avoid energy
loss.
No heat loss and cold handles with
induction cooking.
9
Use
Getting used to it...

309655
Induction cooking
A magnetic field is generated in the appliance. By placing a
pan with an iron base on a cooking zone, a current is induced in
the pan base. This induced current generates heat in the base of
the pan.
• Easy
- The electronic controls are accurate and easy to set. On the
lowest setting, you can melt chocolate directly in the pan, for
example, or cook ingredients that you would normally heat
in a bain-marie.
• Fast
- Thanks to the induction hob’s high power levels, bringing
food to the boil is very quick. Cooking food through takes
just as long as for other types of cooking.
• Clean
- The hob is easy to clean. Because the cooking zones do not
get any hotter than the pans themselves, food spills cannot
burn on.
• Safe
- The heat is generated in the pan itself. The glass top does
not get any warmer than the pan. This means that the
cooking zone is considerable cooler compared to that from
a Ceramic hob or a gasburner. Once a pan has been taken
away, the cooking zone cools down quickly.
Pans for induction cooking
Induction cooking requires a particular quality of pan.
Attention
Pans that have already been used for cooking on a
gas hob are no longer suitable for use on an induction
hob.
Only use pans that are suitable for electric and
induction cooking with:
• a thick base (minimum 2.25 mm)
• a flat base.
The best are pans with the ‘Class Induction’ quality
mark.
The coil (1) in the hob (2) generates
a magnetic field (3). By placing a
pan with an iron base (4) on the coil,
a current is induced in the base of
the pan.
Pans
10

309655
Tip
You can check for yourself whether your pans are
suitable using a magnet. A pan is suitable if the base
of the pan is attracted by the magnet.
Suitable Unsuitable
Special stainlesssteel pans Earthenware
Class Induction Stainless steel
Hard-wearing enamelled pans Porcelain
Enamelled cast-iron pans Copper
Plastic
Aluminium
Attention
Be careful with enamelled sheet-steel pans:
• the enamel may chip (the enamel comes loose from
the steel), if you switch the hob on at a high setting
when the pan is (too) dry;
• the base of the pan may warp - due, for example, to
overheating or to the use of too high a power level.
Attention
Never use pans with a misshapen base. A hollow or rounded
base can interfere with the operation of the overheating
protection, so that the appliance becomes too hot. This may lead
to the glass top cracking and the pan base melting. Damage
arising from the use of unsuitable pans or from boiling dry is
excluded from the guarantee.
Cooking zone Minimum pan diameter
145 mm 120 mm
180 mm 145 mm
210 mm 145 mm
180x280 mm »oval« 180 mm
Minimum pan diameter
• The diameter of a pan must be at least 12 cm. You
will achieve the best results by using a pan with the
same diameter as the zone. If a pan is too small the
zone will not work.
Pressure cookers
• Induction cooking is very suitable for cooking in
pressure cookers. The cooking zone reacts very
quickly, and so the pressure cooker is quickly up to
pressure. As soon as you switch a cooking zone off,
the cooking process stops immediately.
11

309655
Switching on the hob and setting the power
The power has 9 settings. There is also a ‘boost’ setting, which is
indicated by a ‘P.’ in the display.
1. Put a pan on a cooking zone.
2 Touch the on/off sensor key .You will hear a short beep
and the display for each cooking zone will read zero (“0”). If
no sensor key is touched within ten seconds after switching
on the cooking hob, the cooking zone will be automatically
switched back off.
3. Slide your finger across the slider, from left to right, to select
the desired setting. The cooking zone will automatically start
operating with the set power (if a piece of cookware with
sufficiently large diameter is perceived on the cooking zone).
Tip
In order to set the cooking power faster, simply press
on a point on the slider towards the right (or towards
the left, if you wish to decrease the power).
• Pan detection
- If the hob does not detect a (ferrous) pan after the cooking
power has been set, the pan detection symbol and the
selected power setting will flash alternately on the display
and the hob will remain cold. If a (ferrous) pan is not placed
on the cooking zone within 10 minute, the cooking zone will
automatically switch off.
• Residual warmth indicator
- A cooking zone that has been used intensively will retain
heat for several minutes after it has been switched off. An
'H.' appears in the display as long as the cooking zone is
hot.
Settings
12
Operation

309655
Automatic heat-up function
The automatic heat-up function temporarily increases the power
(setting ‘9.’) to heat the contents of the pan faster. This function
is available in all settings except the ‘Boost’ setting and setting
‘9.’.
Switching on the automatic heat-up function
The hob is switched on and a pan has been placed in a cooking
zone.
1. Slide your finger across the slider to the desired level and hold
your finger at that position for approximately three seconds.
2. “A” will appear on the display. If the setting “4” is selected, “4”
and “A” will flash alternately on the display. Attention!
3. When the pan is heated up to the selected temperature, the
automatic heat-up function will be switched off, and the cooking
zone will resume operation at the selected level.
The below table shows the duration of the automatic heat-up
function for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
Switching off the automatic heat-up function
Symbol “A” and the selected cooking power will flash alternately
on the display,
1. To select a cooking zone, touch the slider sensor. A different
power level will be displayed, and the symbol “A” will stop
flashing. Alternatively:
2. Select the power level “9”. Alternatively:
3. Touch the slider sensor on the far left end to select the cooking
zone. The display will read “0”. The symbol “A” will stop
flashing and the cooking zone will be switched off.
Boost
The ‘Boost’ function is used to cook at maximum power for
a short period of time (maximum 10 minutes). The power is
reduced to setting 9 at the end of the maximum boost time.
Activating the power boost function
Switch on the cooking hob and place a pan on a cooking zone.
1. Touch the sensor key for the desired cooking zone. This
sensor key can also be used when the cooking power has
already been set.
2. Power boost function is instantly activated.
13

309655
Switching off the boost function
The boost function is switched on, the display shows ‘P.’.
1. Touch the slider at any desired point. The display will indicate
the selected setting and the power boost function will be
switched off. Alternatively:
2. Touch the left end of the slider. The display will read “0” and
the cooking zone will be switched off.
• Two cooking zones behind each other
- Two cooking zones that are behind each other influence
each other. The power is automatically distributed when
these cooking zones are used at the same time. This does
not have any consequences up to setting 9. Selecting
the Boost setting for one of the cooking zones, however,
automatically switches the other cooking zone to a lower
setting.
- If one of the cooking zones is set to boost and you want to
set the other zone to setting 9 or Boost, the cooking zone
that is set to boost will automatically be switched to a lower
setting.
- Two cooking zones that are beside each other do not
influence each other. You can set both cooking zones to
Boost.
Melting/keeping food warm
To activate the defrost function, press the (10) sensor key; to
activate the “Stay Warm” function, press the (12) sensor key.
The cooking timer is used to set the maximum melting/warming
time.
Defrost function ( ) “Stay Warm” function ( )
The melt function keeps
the temperature of the
food at a constant 42 °C.
The function to keep food warm
keeps the temperature of the food
at a constant 70 °C.
Switching on the melt function
The hob is switched on and a pan is on the cooking zone.
1. Touch the On/Off button.
You will hear a single bleep and the display for each cooking
zone will show ‘0.’.
2. Touch the defrost function sensor key (10) once. You will hear
a short beep and the indicator symbol (11) will light up.
3. To select the desired cooking zone, touch the slider at any
point.
The display will read ‘ ’ (15).
14

309655
Switching on the function to keep food warm
1. Repeat step 1 (see above).
2. Touch the “Stay Warm” function sensor key (12). You will hear
a short beep and the indicator symbol (13) will light up.
3. To select the desired cooking zone, touch the slider at any
point.
The display will read ‘ ’ (16).
Switching off the melting/keeping food warm function
The function to melt and keep food warm is switched on.
The symbol ‘ ’ or ‘ ’ will be indicated on the display.
1. In order to deactivate the defrost or “Stay Warm” function,
touch the slider at any point. Alternatively:
2. Touch the left end of the slider. The setting “0” will read on the
display. The cooking zone is now switched off.
If the defrost or “Stay Warm” function is activated and
the slider is touched at any position, the function will
be switched off and the cooking field will continue to
operate at the selected power level.
Switching off the hob
Switching off one cooking zone
1. The cooking zone is switched on. The display shows a power
setting between 1 and 9, or ‘P.’.
To switch off the cooking zone, slide your finger across the
slider from right to left until the setting “0” is indicated on the
display.
Or:
2. Press on the left end of the slider to select the setting “0”.
You will hear a bleep and the display will show ‘0.’. If all of the
cooking zones are set to ‘0.’, the hob automatically switches to
stand-by mode (see also ‘Stand-by mode’).
Switching off all of the cooking zones at the same time
The hob is in stand-by mode, or one or more of the cooking
zones are active.
1. Briefly touch the On/Off button to switch off all of the
cooking zones at the same time.
You will hear a single bleep. No lights are illuminated.
The cooking zone is now switched off.
Note
You can switch off the hob if the (child) lock is set or
the pause mode is active.
15

309655
Stand-by mode
In stand-by mode, the display for each cooking zone shows
‘0.’. The hob is switched off and can be left unattended. You
can switch to stand-by from 'Off' mode, or by switching off the
individual cooking zones (by setting them to ‘0.’). In stand-by
mode, the hob automatically switches off if no other buttons are
touched within 10 seconds.
Switching the hob from 'Off' to stand-by mode
1. Touch the On/Off button .
You will hear a single beep and the display for each cooking
zone will show ‘0.’. The red light to the right above the On/Off
button is constantly illuminated.
2. When the cooking hob is in the stand-by mode, it can be
activated by pressing on any part of the slider for the desired
cooking zone.
(Child)lock
You can secure the hob with the (child)lock. With this setting, the
hob cannot be switched on and the cooking zone settings cannot
be changed.
The button gives you access to the following two functions:
(Standard) lock mode Child lock mode
The (standard) lock mode
prevents settings from being
accidentally changed.
The child lock mode
prevents the hob from being
accidentally switched on.
All of the set cooking
processes remain active.
All of the cooking zones and
the cooking timers/minute
minders must be switched off.
Switch the hob to (standard) lock mode
One or more cooking zones are active.
1. Touch and hold the button.
Attention! All of the set cooking processes remain active.
The symbol next to the sensor key (23) will be lit
constantly.
All of the buttons are inactive, except the button and the
On/Off button .
2. Touch and hold the button to switch off lock mode and
unlock the control panel.
16

309655
Switching on the child lock
The hob is in stand-by mode. The display for each cooking zone
shows ‘0.’.
1. Touch and hold the button to switch on the child lock.
The symbol next to the sensor key (23) will be lit
constantly.
If no buttons are touched within 10 seconds, the cooking zone
will automatically switch off. The child lock remains active. You
can even switch off the hob.
Touch the button again within 10 seconds to switch off the
child lock and unlock the control panel.
You must wait 10 seconds before switching the hob on again with
the On/Off button in order to switch off the child lock.
Tip
Switch the hob to child lock mode before cleaning it to
prevent it accidentally switching on.
Stop / Go
Use the Stop / Go function to 'pause' the whole hob for 10
minutes while cooking. The power for all of the cooking zones
is automatically switched off. This is convenient, for example, if
a pan boiled over and you want to clean the hob. You can also
leave the hob unattended for a short period of time without losing
any settings.
Switching on hob to Stop / Go mode
One or more cooking zones are active.
1. Touch the sensor key once.
You will hear a beep and the indicator (17) will light up.
For each cooking zone, the display (14) will indicate a
symbol .
• Any set cooking timers/minute minders stop.
• All of the buttons are inactive except the button, the
button and the On/Off button.
If no buttons are touched within 10 minutes, all of the active
cooking zones are automatically switched off.
Switching off Stop / Go mode
Press the buttom again within 10 minutes and press any other
button immediately afterwards.
Recall function
If you mistakenly turn off the hob, all settings can be restored
within six seconds by turning the hob back on and pressing the
STOP/GO button immediately afterwards.
17

309655
Recognising a mode
Stand-by mode
The display for each cooking zone shows
‘0.’. The red light to the right above the
On/Off button is constantly illuminated.
(Standard) lock
mode
One or more displays show a power
setting. The red light to the right above
the button and the red light to the
right above the On/Off button are
constantly illuminated.
Child lock mode
Display for all cooking zones will indicate
“0”. The indicator next to the
sensor key (23) will be lit constantly. All
lights on the display will go off after ten
seconds. Child safety lock will remain
activated.
Stop / Go mode
Display for all cooking zones will indicate
. The indicator next to the sensor
key (17) will be lit constantly.
The pause function will only work if one
or more cooking zones are activated.
Memory mode
Display for all cooking zones will indicate
“0”. The indicator next to the sensor
key (17) will flash.
Cooking timer/Minute minder
A cooking timer can be set for each cooking zone. All of the
cooking timers can be used at the same time. The hob also has an
minute minder. Both the cooking timer and the minute minder can
be set to a maximum of 99 minutes.
The minute minder works the same way as the cooking timer,
but is not linked to a cooking zone. If set, the minute minder will
continue to run after the hob has been switched off. The minute
minder can only be switched off when the hob is switched on.
The cooking timer The minute minder
The cooking timer must be
linked to a cooking zone. This
means that the cooking zone
switches off when the set time
elapses.
The minute minder is not
linked to a cooking zone. The
minute minder continues to
run after the hob has been
switched off.
Switching on the minute minder
The hob is switched on.
1. To set the cooking time or the minute countdown timer, touch
the sensor key. The display will read “00”.
2. Use the slider for the selected cooking zone to set the desired
cooking time. The minute countdown timer stars counting
down when the dot next to the time display disappears. If no
18

309655
time is set with the slider, the minute countdown timer will be
automatically switched off after ten seconds.
Switching off the minute minder
(Step 1 and 2 are not applicable if one or more cooking zones
are active).
1. Touch the On/Off button to switch the hob on.
2. To set the time / minute countdown timer, simultaneously touch
the desired slider.
3. To set cooking time / minute countdown timer, slide your
finger across the slider until the display reads “00”. Minute
countdown timer is now in standby mode. After ten seconds,
the minute countdown timer will automatically be switched off.
Assigning and switching on the cooking timer
The hob is switched on. The cooking timer can only be linked to
active cooking zones.
1. To set the cooking time for the first active cooking zone, touch
the senor key (in this case, the countdown timer for the rear
left cooking zone is active). Each time the sensor key is
subsequently pressed, the next cooking zone will be selected
for countdown timer setting, as indicated on the display.
2. Use the slider to set the desired cooking time. When the dot
next to the time setting display disappears, the countdown
begins. The red signal light for the active cooking zone’s
countdown timer will be lit continuously. If no cooking time is
set with the slider, the countdown timer will be automatically
switched off after ten seconds.
3. Repeat steps 1 and 2 to set the time for another active
cooking zone.
Attention!
If several cooking timers/minute minders are running,
the cooking timer/minute minder display will always
show the cooking timer/minute minder that has the
least time remaining.
Switching off the cooking timer
1. To switch off the desired cooking time, press the sensor
key. A dot will light up next to the displayed cooking time.
2. To set the cooking time / minute countdown timer, slide your
finger across the slider until the display reads “00”.
The cooking timer is now in stand-by mode. The selected
cooking timer automatically switches off after 10 seconds.
19

309655
Switching off the cooking timer/minute minder alarm
When the set time/cooking time has elapsed, the alarm rings and the
red light for the active cooking zone/minute minder flashes ‘00’.
1. Touch any button to switch off the alarm.
Tip
• To set the cooking time, slide your finger SEVERAL TIMES
across the entire length of the slider, from left to right.
20