Gosyo Co Pierrot Yarns 1200ruck User manual

1200ruck Rucksack
Summary
※Note 1: Like all Japanese patterns, stitch counts given here for foundation chains do not include any chain sts needed for
turning posts.
※Note 2: Entire item worked with 2 strands of yarn held together.
Body of rucksack: Work foundation chain to begin, then work bottom in sc. Continue to sides/gusset by working sts around
all four sides of the bottom and joining into the round. Work sides/gusset in the round in sc and dc. Continue from side to
flap, but work back and forth in rows instead of in the round. Work edging in the round along mouth of bag and edges of flap.
Insulated pocket: Work foundation chain to begin, then work side and gusset in sc. Work opening for zipper in gusset
section as indicated in schematics. Refer to schematics for details on how to insert thermal fabric. Seam side and gusset
with sc seam, then sew pocket to rucksack with whipstitch.
Side pocket (make 2): Work foundation chain to begin, then work in sc according to chart. Sew to rucksack with whipstitch.
Shoulder strap (make 2): Work foundation chain to begin, then work in sc. With wrong sides facing each other, seam
foundation edge to bind-off edge with whipstitch. Assemble each strap as shown in schematics.
Finishing: Attach handles to body of bag using webbing (woven strap). Insert the webbing into the shoulder strap so as to
conceal it; secure with whipstitch (see schematics).Thread part B through D-ring, then whipstitch to body of rucksack. Sew
where indicated using blindstitch. Attach part A to flap and body of rucksack where indicated using whipstitch and blindstitch.
Abbreviations:
ch = chain dc = double crochet (US) RS = right side sc = single crochet (US) WS = wrong side
Suggested yarn:
• Pierrot Yarns Ethnic Denim 2 [100% cotton; 118 yds/108m per 1.06 oz./30g skein];
• color #14 rose pink, 10 skeins [295g]
• color #08 navy, 7 skeins [190g]
Tools/Notions:
• 4.0mm (US G) crochet hook or size necessary to achieve gauge
• 1 sheet of thermal fabric (42cm/16.54" by 30cm/11.81")
• 3 D-rings (20mm/0.79")
• 1 swivel ring (20mm/0.79")
• 2 rectangular slides for straps (19mm/0.75")
• 1 cord stop
• 1 m/39.37" of cord to your liking
• webbing for straps (15mm/0.59" wide, 1.5m/59.06" long)
• 1 zipper with ball chain pull (20cm/0.79")
• 2 snap buttons (12mm/0.47")
• sewing thread & needle
Finished measurements:
• depth 43.5cm/17.13"
• width 30cm/11.81"
• gusset depth 10.5cm/4.13"
Gauge (10cm/4" square):
• single crochet (US): 17 sts and 19 rows
Gauge may vary according to individual crochet style. Change hook size if necessary to achieve
gauge. Alternatively, rework pattern with your own gauge measurements.
© 2018 Pierrot Yarns (Gosyo Co., Ltd.). Translation by LinguaForge, LLC. All rights reserved.

Body of rucksack
Flap & edging
join yarn start of rounds
27 sts
20 sts
11 sts
corner:
+1 st corner:
+1 st
103 sts
scsc
10.5cm | 18 sts
attach snap here start: 51 sts | 30cm
81cm | 138 sts
10.5cm
20 rows
bottom sc
30cm | 51 sts 30cm | 51 sts
2 sts 2 sts
6 sts6 sts
43.5cm
83 rounds
6cm 12 rows
13cm 26 rows
4cm 8 rounds
37.5cm 71 rounds
2cm 4 rounds
color #08 color #14 edging
0.5cm
1 round
20.5cm | 35 sts
6.5cm
11 sts
sc
sc
gusset
gusset
7 sts
side pocket
2 rows
2 rows 2 rows
side side
start of rounds
8 sts 8 sts
4 rounds
1 round
3 rounds
dc
attach insulated
pocket here

Insulated pocket
Bottom gusset
15cm
29 rows
ch39 to begin
23cm | 39 sts
sc
side 4.5cm 9 rows
15cm
26 sts 15cm
26 sts
23cm
39 sts 23cm
39 sts
3 sts 76cm | 130 sts
3 sts
sc
gusset
ch130 to begin
zipper location
ch33
ch130 to begin
sew with
sewing thread
5cm
sew
bottom WS
side seam
thermal fabric
23cm
14.5cm
5cm
zipper location
RS
thermal fabric
With right sides facing
each other, sew each end
of zipper opening.
41cm
1cm 1cm
1cm
1cm
4cm 20cm 4cm
17cm
2.5cm
17cm
2.5cm
zipper location
30cm
RS
valley fold
thermal fabric
How to insert zipper
3 sts
1 row gusset
3 sts
zipper
1 row
➀ With color #08, sew zipper
to gusset from right side.
➁ With color #08, seam side
to gusset with wrong sides
facing each other using sc.
25 sts
39 sts
0.5cm
corner: +1 st
pocket
WS thermal fabric
➂Insert thermal fabric into pocket.
Sew zipper where marked with
using sewing thread.
➃ with 1 strand of color #08,
seam gusset and thermal fabric
with half blindstitch.
➄With color #08, seam thermal fabric
to area marked on pocket.
➅ With color #08, seam to sides of bag
where indicated in finishing schematic
using whipstitch.
valley fold
valley fold
mountain fold
mountain fold
mountain fold = fold so that fabric takes "mountain" shape
valley fold = fold so that fabric takes "valley" shape

Side pocket (make 2)
Shoulder strap (make 2)
edging: sc
0.5cm
1 row
flap
10 sts
5cm
10 rows
12cm
23 rows
ch14
to begin
8cm
14 sts
flap sc
sc
side
12cm
20 sts 8cm
14 sts 12cm
20 sts
start: 54 sts | 32cm
1.5cm 3 rows
sc
gusset
28 sts from back
edging: sc
0.5cm
1 row 1 st running stitch
color #08
2 rows
7 sts
2 rows
valley fold
14 sts corner:
+1 st
20 sts
attach
snap
here
➀ With wrong sides facing each other, seam
side piece to gusset using color #08 and sc.
➁ Attach snap to gusset and underside of flap.
➂ Fold flap where indicated using valley fold;
stitch in place with running stitch.
➃ Seam side pocket to gusset of rucksack
using color #08 and whipstitch.
5cm 10 rows
29cm | 49 sts
ch49 to begin
sc
fold here
fold here
2 rows
7 sts
shoulder
strap webbing
0.5cm
D-ring
3cm
slide
Fold foundation edge and bind-off edges
inward (with wrong sides facing each other).
With color #08, seam with whipstitch.
➀ Thread webbing through
slide and sew with color #08.
➁ Thread through D-ring and then
back through slide again.
➂ Insert webbing into shoulder strap. With
color #08, sew tape in place with running stitch.

Cord threading instructions
Finishing
Part B (make 2)
Part A
make 1 with color #08
make 1 with color #14
10 sts 9 sts10 sts 10 sts 10 sts 10 sts 10 sts 10 sts 10 sts9 sts
location of
shoulder straps
1 st
14 sts 14 sts
center
2651185118 1
cord stop
※Choose whatever cord you like.
Sample in photos uses 2 strands of
Ami Cotton Bulky (2m total). If using
another cord, use 1 strand 1m long.
11 sts
handle:
webbing
22cm
whipstitch
sc color #08
part B
4cm 8 rows
start: 3 sts
1.5cm
part B
2 rows
Insert 1.5cm into strap.
Sew handle, body, and
shoulder strap together
with blindstitch.
side pocket
shoulder straps
webbing
(64cm per side)
6
sts 17
sts
★= 8 rows
★
Seam body and part B
together with wrong
sides facing each other
using color #08.
6 sts
3 sts
4 sts
2 rows
4 sts
3 sts
18 sts 18 sts
6 sts
part A
color #14
After inserting D-ring,
whipstitch to rucksack
on wrong side with
color #14.
With color #14,
seam to body
with blindstitch.
sc
5cm 10 rows
start: 3 sts
1.5cm
swivel
ring
part A
color #08
blindstitch
(color #08)
Insert flap
& whipstitch.
➀ Thread part A onto swivel ring on wrong side.
➁ Insert flap between layers of part A.
➂ Whipstitch where indicated.
➃ Attach to body of rucksack with blindstitch.
After inserting
D-ring,
whipstitch to
rucksack on
wrong side
with color #08.