Gotrax Pulse Basic User manual

Pulse Basic
USER MANUAL
A SMART HOVERBOARD


Congratulations
on your purchase!

This user manualwill help you assemble and
operate your new Electric Scooter. Be sure to read
ALL OF THE INFORMATIONin this manual
before riding.
NOTE TO ALL RIDERS UNDER 18 YEARS OF AGE:
It’s very important that you get parental permission
before riding your Hoverboard.

Make sure your scooter has a full battery before taking it out to ride.
Don’t ride until you read this
ALWAYS wear a helmet when riding your hoverboard.
Always be aware of local road laws, and follow them.
Do not ride the scooter under the influence of drugs or alcohol.
Always respect pedestrians.
Do not ride under wet conditions. The scooter may slide from under
your feet causing injury. Wet conditions may damage the electronics
and viod the warranty.
Maximum Speed: Your hoverboard goes a maximum speed of 6.2mph.

1.
2.
3.
4.
5.
6.
7.
Warning Message
Avoid water - The hoverboard is not waterproof. The electronics may be
damaged due to water and damage is not covered by our warranty. Riding
in wet conditions is also very dangerous and may result in injury.
Abuse - We do not cover physical damage due to negligent care and
extreme riding.
Whenever you ride the GOTRAX hoverboard, you risk severe injury or
even death from loss of control, collisions, and falls.Use caution and ride at
your own risk.
Do not modify the product from the manufacture’s original design.
Keep hands and all boby parts away from moving parts while operating
the scooter.
Before riding - be sure to check the hoverboard over and make sure the
hoverboard is operating correvtly before each use.
The hoverboard should never be used by children under the age of 8.
8 . Never exceed the 176lbs(80kg) maximum load rating.

Unpack
You should find each of these items in your box:
1. Hoverboard
2. Approved Power Adapter / Charging Unit
Remove all packaging material, then inspect each item for any accidental
damage that may have occurred during shipping.

Get to know your hoverboard
The hoverboard comes fully assembled.
Specifications
6.2mph
3.1miles
176lbs
25.2V 2.6Ah
DC29.4V 0.6A
5 hours
AC100-240V 50/60Hz 0.8A Max.
~
Footpad
Blue LED Blue LED
Footpad
Power Button
Charger Port

Before using the hoverboard, you must charge the battery.
1. Insert the charging pulg into port.
2. The charger box will have a green light when fully charged and a red
light when charging.
3. Charging Time: 5 hours.
Charge your hoverboard

Hoverboard Functions
To power the hoverboard on, press and hold the Power Button on the back
of your hoverboard for 2 seconds.
To power the hoverboard off, press and hold the Power Button on the
back of your hoverboard for 2 seconds.
Forward Acceleration: Gently push down with your toes. Be prepared to lean
forward slightly as the board accelerates.
Forward Acceleration: Gently lift your toes. Be prepared to lean backward as
the board accelerates.
To Turn Right: Push gently down with your left toes. Be prepared to shift your
weight to the right.
To Turn Left: Push gently down with your left toes. Be prepared to shift your
weight to the left.
Slow to Stop: Return to an upright position with your weight evenly balanced.

Low Battery: When the hoverboard is low on battery and ablout to die,the
hoverboard will beep and flash red on the LED lights. Once it starts beeping
and you see the red LED light, get off of the hoverboard and charge.
Overheat Alarm: The motor will overheat after a long time of high speed
running. When the motor temperature is high, it will keep beeping, and the
hoverboard will move very slowly. Meanwhile, the red light will be flashing all
the time. If it continues to run, the control system will cut off the power to
protect the motor from damage.
Warning: To prevent wrestling, when the motor temperature is too high and
the alarm is beeping, please stop riding the hoverboard, and wait for the
motor cool down before riding.

Riding Tips
1. You will want to start riding your hiverdoard by mounting the board from the
rear. The rear of the board can be identified by the power button and the
charging port.
2. Place your hoverboard on the ground directly in front of your feet. Step with
one foot onto the platform, and then quickly step up onto the hoverboard with
your second foot.
3. Always dismount from the back of the hoverboard.
4. The hoverboard performs best when on a smooth surface e.g. carparks,
smooth roads, footpaths.
5. Always clean your hoverboard (wheel, platform, etc.), it’s a, machine and it
needs to be maintained.
6. Be aware of the terrain you are riding on, watch out for curds and obstacles!

Maintenance & Repair
If you regularly clean and maintain your electric hoverboard, it will
extend its life.
Cleaning and storage: If the scooter is dirty, wipe it clean with a soft
damp cloth.
DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents
to clean the hoverboard. It can severely damage the appearance and structure
of the hoverboard. Please do not use a pressure washer as it may also cause
damage to the electronics.
Storage: When you’re not using your hoverboard store in a dry and cool
location. Aviod storing your scooter outdoors because sun exposure can
damage it’s appearance and may cause wear on the life of the battery and
tires.
Troubleshooting: One of the most common solutions for hoverboard issues is
calibrating your board. Here are the steps involced in hoverboard calibration:
1. Start with the hoverboard powered off.
2. Adjust the foot pedals until they are level with each other and the ground.
3. Press and hold the power button for 10 seconds. The LED lights will flash.
4. Press the power button to turn off.

5. Press the power button to turn on. The hoverboard will be calibrated and
ready for galactic adventures.
NOTE: You may have to repeat the above process multiple time in order to fully
reset and calibrate your hoverboard. For example, you may have to go
through the process 3 times in a row before the calibration fully takes effect.

Battery Information
Only use the approved GOTRAX power adapter to charge your hoverboard,
others may cause risk of fire & equipment may be damaged.
Improper disposal of used batteries may seriously pollute the environment.
Please comply with local disposal regulations.
Make sure to store your hoverboard and power adapter in conditions that do
not exceed 104 degrees Fahrenheit or below 32 degrees Fahrenheit.
Warning - Risk of Fire - No User Serviceable Parts, The prolonged exposure
to UV Rays, Rain and the Elements may damage the enclosed materials, store
indoors when not in use.
NOTE:
*Only use the battery(ies) specified by the manufaturer.
*Only use the charger(s) specified by the manufaturer.

Warranty
Troubleshooting
We frequently update our user manuals at GOTRAX.com, and reserve the
rights to update and change manuals online.
Please contact our customer service team if you are experiencing problems or
need more detailed information. They can be reached at GOTRAX.com.
For warranty information, please visit GOTRAX.com.



W W W . G O TRAX. C O M
#RideGOTRAX

GOLABS, INC
GOTRAX.com
2201 Luna Rd.
This manual suits for next models
1
Table of contents
Other Gotrax Hoverboard manuals

Gotrax
Gotrax E3 User manual

Gotrax
Gotrax SRX User manual

Gotrax
Gotrax SRX User manual

Gotrax
Gotrax SRX PRO User manual

Gotrax
Gotrax SRX PRO User manual

Gotrax
Gotrax EDGE User manual

Gotrax
Gotrax Remix User manual

Gotrax
Gotrax Infinity Pro User manual

Gotrax
Gotrax Glide User manual

Gotrax
Gotrax Nova Pro User manual