Gotrax SRX A6 User manual

SRX A6
USER MANUAL
LED HOVERBOARD WITH BLUETOOTH

ALWAYS wear a helmet when riding your hoverboard.
Make sure your hoverboard has a full battery before taking it out to ride.
Always be aware of local road laws, and follow them.
Do not ride the hoverboard under the inuence of drugs or alcohol.
Always respect pedestrians.
Do not ride under wet conditions. The hoverboard may slide from under your
feet causing injury. Wet conditions may damage the electronics and void the
warranty.
Maximum Speed: Your hoverboard goes a maximum speed of 7 mph.
Don’t Ride Until You Read This:

1. Avoid water - The hoverboard is not waterproof. The electronics may be
damaged due to water and water damage is not covered by our warranty. Riding
in wet conditions is also very dangerous and may result in injury.
2. Abuse - We do not cover physical damage due to negligent care and extreme
riding.
3. Whenever you ride the Gotrax Hoverboard, you risk severe injury or even death
from loss of control, collisions, and falls. Use caution and ride at your own risk.
4. Do not modify the product from the manufacturer’s original design.
5. Keep hands and all body parts away from moving parts while operating the
hoverboard.
6. Before riding - be sure to check the hoverboard over and make sure the
hoverboard is operating correctly before each use.
7. Never exceed the 220 lb (100 kg) maximum load rating.
8. The hoverboard should never be used by children under the age of 8.
Warning Message

You should nd each of these items in your box:
1. Hoverboard
2. Approved Power Adapter / Charging Unit
Remove all packaging material, then inspect each item for any
accidental damage that may have occurred during shipping.
STEP 1: UNPACK
You should find each of these items from your ECO box:
1. ECO Hoverboard
2. ECO Approved Power Adapter / Charging Unit
Remove all packing material, then inspect each item for any
accidental damage that may have occurred during shipping.
Unpack

The hoverboard comes fully assembled.
Get To Know Your Hoverboard

Before using the hoverboard, you must fully charge the battery.
1. Insert the charging plug into the port.
2. The charger box will have a green light when fully charged and a red light when
charging.
3. Charging Time: 4-5 hours
CHARGE
YOUR HOVERBOARD
Before using the hoverboard, you must fully charge the battery.
1. Insert the charging plug into the port.
2. The charger box will have a green light when fully
charged and a red light when charging.
Charge Your Hoverboard

To power the hoverboard on, press and hold the silver button on the back of your
hoverboard for 1 second.
To power the hoverboard o, press the silver button on the back of your hoverboard
twice in a row.
Forward Acceleration: Gently push down with your toes. Be prepared to lean forward
slightly as the board accelerates.
Backward Acceleration: Gently lift your toes. Be prepared to lean backward as the
board accelerates.
To Turn Right: Push gently down with your left toes. Be prepared to shift your weight
to the right.
To Turn Left: Push gently down with your right toes. Be prepared to shift your weight
to the left.
Slow to Stop: Return to an upright position with your weight evenly balanced.
Low Battery: When the hoverboard is low on battery and about to die, the hoverboard
will beep and ash red on the LED lights. Once it starts beeping and you see the red
LED light, get o of the hoverboard and charge.
Hoverboard Functions

1. You will want to start riding your by mounting the board from the rear. The rear of
the board can be identied by the power button and the charging port.
2. Place your hoverboard on the ground directly in front of your feet. Step with one
foot onto the platform, and then quickly step up onto the hoverboard with your
second foot.
3. Always dismount from the back of the hoverboard.
4. The hoverboard performs best when on a smooth surface e.g. carparks, smooth
roads, footpaths.
5. Always clean your hoverboard (wheels, platform, etc.), it’s a machine and it needs
to be maintained.
6. Be aware of the terrain you are riding on, watch out for curbs and obstacles!
Riding Tips

The hoverboard features a Bluetooth speaker that can be paired with any mobile
device to play audio. The Bluetooth speaker is automatically enabled when the
hoverboard is turned on and will remain enabled and discoverable as long as the
hoverboard is powered on. Read the instructions below to learn how to operate the
hoverboard Bluetooth speaker.
1. To turn on the Bluetooth speaker, power on the hoverboard as normal.
2. Turn on the Bluetooth on the mobile device you wish to pair with your
hoverboard Search Name “YIYUN TECH”.
3. On your mobile device, click on “ YIYUN TECH” to connect. The Bluetooth speaker
on the hoverboard will voice that a connection has been made and the devices
are successfully paired.
4. Make sure your mobile device and the hoverboard remain within a reasonable
distance in order to maintain a connection. The Bluetooth speaker will not
operate properly or will turn o if the hoverboard and the mobile device are too
far apart.
5. Play the music or audio you wish to hear on your mobile device, and it will
broadcast through the hoverboard Bluetooth speaker.
Bluetooth Setup

If you regularly clean and maintain your electric hoverboard, it will extend its
life.
Cleaning and storage: If the hoverboard is dirty, wipe it clean with a soft damp cloth.
DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents to
clean the hoverboard. It can severely damage the appearance and structure of the
hoverboard. Please do not use a pressure washer as it may also cause damage to the
electronics.
Storage: When you’re not using your hoverboard store in a dry and cool location.
Avoid storing your hoverboard outdoors because sun exposure can damage it’s
appearance and may cause wear on the life of the battery and tires.
Maintenance & Repair

Troubleshooting: One of the most common solutions for hoverboard issues is
calibrating your board. Here are the steps involved in hoverboard calibration:
1. Start with the hoverboard powered o.
2. Adjust the foot pedals until they are level with each other and the ground.
3. Press and hold the power button for 10 seconds. The LED lights will ash.
4. Press the power button to turn o.
5. Press the power button to turn on. The hoverboard will be calibrated and ready
for galactic adventures.
NOTE: You may have to repeat the above process multiple times in order to fully
reset and calibrate your hoverboard. For example, you may have to go through the
process 3 times in a row before the calibration fully takes eect.

Only use the approved Gotrax power adapter to charge your hoverboard, others may
cause risk of re & equipment may be damaged.
Improper disposal of used batteries may seriously pollute the environment. Please
comply with local disposal regulations.
Make sure to store your hoverboard and power adapter in conditions that do not
exceed 104 degrees Fahrenheit or below 32 degrees Fahrenheit.
Warning - Risk of Fire - No User Serviceable Parts, The prolonged exposure to UV
Rays, Rain and the Elements may damage the enclosed materials, store indoors when
not in use.
Battery Information

We frequently update our user manuals at gotrax.com, and reserve the rights to
update and change manuals online.
Please contact our customer service team if you are experiencing problems or
need more detailed information. They can be reached at gotrax.com.
Warranty
For warranty information, please visit us at www.gotrax.com.
Troubleshooting