Gotrax SRX PRO User manual

LED H OVERBOAR D
SRX PRO
USER MANUAL

This user manual will help you operate your
new hoverboard. Be sure to read ALL OF THE
INFORMATION in this manual before riding.
NOTE TO ALL RIDERS UNDER 18 YEARS OF AGE:
before riding your hoverboard.
Congratulations
on your purchase!

ALWAYS wear a helmet when riding your hoverboard.
MAKE SURE your hoverboard has a full battery before taking it out
to ride.
ALWAYS BE AWARE of local road laws, and follow them.
DO NOT RIDE
ALWAYS respect pedestrians.
DO NOT RIDE under wet conditions. The hoverboard may slide
from under your feet causing injury. Wet conditions may damage the
electronics and void the warranty.
MAXIMUM SPEED: Your hoverboard goes a maximum speed of 7.4
mph.
Don’t Ride Until You Read This:

1. AVOID WATER - The hoverboard is not waterproof. The electronics
may be damaged due to water and water damage is not covered by
our warranty. Riding in wet conditions is also very dangerous and may
result in injury.
2. ABUSE - We do not cover physical damage due to negligent care and
extreme riding.
3. WHENEVER YOU RIDE the GOTRAX Hoverboard, you risk severe
injury or even death from loss of control, collisions, and falls. Use
caution and ride at your own risk.
4. DO NOT MODIFY the product from the manufacturers original design.
5. KEEP HANDS and all body parts away from moving parts while
operating the hoverboard.
6. BEFORE RIDING - be sure to check the hoverboard over and make
sure the hoverboard is operating correctly before each use.
7. NEVER EXCEED the 220 lb (100 kg) maximum load rating.
8. THE HOVERBOARD should never be used by children under the age
of 8.
Warning Message

1. Hoverboard
2. Approved Power Adapter / Charging Unit
Remove all packaging material, then inspect each item for any
accidental damage that may have occurred during shipping.
1. SRX PRO Hoverboard
2. SRX PRO Approved Power Adapter / Charging Unit
Remove all packing material, then inspect each item for any
accidental damage that may have occurred during shipping.
Unpack
1 2

Remove all packing material, then inspect each item for any
accidental damage that may have occurred during shipping.
The hoverboard comes fully assembled.
Footpad Footpad
Power Button Charger Port
Get To Know Your Hoverboard
Top Speed:
Distance per Charge:
Weight Range Up To:
Battery Type:
Battery Charger:
Charge Time:
Motor Power:
Power Requirements:
7.4mph
7.5 Miles
220lbs
36V 4.0AH
DC 42V 1.5A
3-4 Hours
250W
AC 100~240V 50/60Hz 1.8A

Before using the hoverboard, you must fully charge the battery.
1. Insert the charging plug into the port.
2. The charger box will have a green light when fully charged and a red
light when charging.
Charge Your Hoverboard
Charging Time: 3-4 hours

To power the hoverboard on, press and hold the silver button on the back of
your hoverboard for 1 second.
press the silver button on the back of your
hoverboard twice in a row.
Forward Acceleration: Gently push down with your toes. Be prepared to lean
forward slightly as the board accelerates.
Backward Acceleration: Gently lift your toes. Be prepared to lean backward as
the board accelerates.
To Turn Right: Push gently down with your left toes. Be prepared to shift your
weight to the right.
To Turn Left: Push gently down with your right toes. Be prepared to shift your
weight to the left.
Slow to Stop: Return to an upright position with your weight evenly balanced.
Low Battery: When the hoverboard is low on battery and about to die, the
power the hoverboard on. Press the power
button for 2 seconds, you will hear a loud beep and that indicates that the self-
balancing mode is off. Repeat this process above to turn the self-balancing mode
back on. and charge.
Hoverboard Functions

1. You will want to start riding your hoverboard by mounting the board
button and the charging port.
2. Place your GOTRAX Hoverboard on the ground directly in front of your
feet. Step with one foot onto the platform, and then quickly step up
onto the hoverboard with your second foot.
3. Always dismount from the back of the hoverboard.
4. The hoverboard performs best when on a smooth surface e.g. carparks,
smooth roads, footpaths.
5.
and it needs to be maintained.
6. Be aware of the terrain you are riding on, watch out for curbs and
obstacles!
Riding Tips

The hoverboard features a Bluetooth speaker that can be paired with
any mobile device to play audio. The Bluetooth speaker is automatically
enabled when the hoverboard is turned on and will remain enabled
and discoverable as long as the hoverboard is powered on. Read the
instructions below to learn how to operate the hoverboard Bluetooth
speaker.
1. To turn on the Bluetooth speaker, power on the hoverboard as
normal.
2. Turn on the Bluetooth on the mobile device you wish to pair with
Bluetooth
Bluetooth
3.
Bluetooth speaker on the hoverboard will voice that a connection has
been made and the devices are successfully paired.
4. and the hoverboard remain within
a reasonable distance in order to maintain a connection. The Bluetooth
speaker will not operate properly or will turn off if the hoverboard and
the mobile device are too far apart.
5. or audio you wish to hear on your mobile device, and
it will broadcast through the hoverboard Bluetooth speaker.
6. or audio through the hoverboard speaker,
disable Bluetooth on your mobile device.
Bluetooth Setup

If you regularly clean and maintain your electric hoverboard, it will extend
its life.
Cleaning and storage: If the hoverboard is dirty, wipe it clean with a
soft damp cloth.
DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical
solvents to clean the hoverboard. It can severely damage the appearance
and structure of the hoverboard. Please do not use a pressure washer as it
may also cause damage to the electronics.
Storage:
location. Avoid storing your hoverboard outdoors because sun exposure
can damage its appearance and may cause wear on the life of the battery
and tires.
Maintenance & Repair

Troubleshooting: One of the most common solutions for hoverboard
issues is calibrating your board. Here are the steps involved in hoverboard
1. Start with the hoverboard powered off.
2. Adjust the foot pedals until they are level with each other and the
ground.
3.
4. Press the power button to turn off.
5. Press the power button to turn on. The hoverboard will be calibrated
and ready for galactic adventures.
NOTE: You may have to repeat the above process multiple times in order
to fully reset and calibrate your hoverboard. For example, you may have
to go through the process 3 times in a row before the calibration fully takes
effect.

Only use the approved GOTRAX power adapter to charge your
Improper disposal of used batteries may seriously pollute the environment.
Please comply with local disposal regulations.
Make sure to store your hoverboard and power adapter in conditions that
do not exceed 104 degrees fahrenheit or below 32 degrees fahrenheit.
- No User Serviceable Parts, The prolonged
materials, store indoors when not in use.
Battery Information

We frequently update our user manuals at GOTRAX , and reserve the
rights to update and change manuals online.
They can be reached at GOTRAX
Warranty
For warranty information, please visit GOTRAX .
Troubleshooting

WWW.GOTRAX.CO M
#RideGOTRAX

GOLABS, INC
GOTRAX .com
Carrollton, TX 75006