Graco Entertainer 4650 User manual
2 3 4
© 2000 Graco 651-3-00 651699
Congratulations on your purchase of a
Graco®Entertainer®activity center!
Graco i the recognized leader in the
de ign and manufacture of quality baby
product . We believe your new Graco®
Entertainer®activity center i a wi e choice,
promi ing many hour of enjoyment for
your baby.
Before u ing your activity center, plea e
take a few minute to read thi Owner
Manual. The hort time you pend reading
the e in truction will help you to u e your
activity center properly.
Customer Satisfaction
Our goal i to make every product the be t it
can be! We are al o committed to upporting our
product after purcha e. If you would like to peak
to Graco about your product, plea e contact our
Cu tomer Service Department at 1-800-345-4109
or vi it our Internet web ite, www.gracobaby.com.
Our knowledgeable taff will be ready to an wer
any que tion you may have concerning part , u e
or maintenance. When you call, plea e have the
model and serial numbers ready o your call
may be proce ed quickly and efficiently.
Model No. __________
Serial No. __________
Dear Cu tomer,
Plea e fill in the
model and erial
number above
from the label
under the tray
of your new
Entertainer®
activity center.
OWNERS MANUAL
PARTS LIST
CHECK that you have all the part li ted below
BEFORE a embling. If any part are mi ing,
call Cu tomer Service at 1-800-345-4109
or vi it our Internet web ite, www.gracobaby.com.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Tool required: Phillip crewdriver
Model 4650
Butterfly
wand
Loop and ring
Seat
Ball holder
(2 part )
Cup
Page (3 large,
3 mall halve )
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THIS PRODUCT.
If you experience any difficultie , plea e contact the Cu tomer Service Department.
KEEP INSTRUCTIONS FOR FUTURE USE.
IN CLOSED-TRAY INFANT MODE, thi product i for u e only by a child who i able
to it upright una i ted but unable to walk, weigh le than 30 pound , and i le
than 32 inche tall. IN OPEN-TRAY TODDLER MODE, thi product i for u e only by
a child who i able to walk.
EXCESSIVE EXPOSURE TO SUN OR HEAT could cau e fading or warping of part .
DO NOT USE THIS PRODUCT if it i damaged or broken.
String can cau e trangulation! DO
NOT place item with a tring around
your child neck, uch a hood
tring or pacifier cord . DO NOT
u pend tring over the activity
center or attach tring to toy .
Never leave child unattended. Alway
keep child in view while in product.
Never lift or carry thi product with
child in it.
Product may gradually move acro
the floor a child play in it. Watch for
movement of product and be ure
child tay away from hazard in the
area uch a tair , cord , hot liquid ,
pool , ource of heat and anything
el e that may injure your child. Never
u e near tair .
Do not u e product in clo ed-tray
infant mode with a child who can tip
over or climb out of product.
To avoid tipover , place product on
flat, level floor/ground. Adju t leg to
ame height o that the tray i level
before placing child in product.
Do not u e in open-tray toddler mode
unle leg are et to lowe t po ition.
Convertible Entertainer
2-in-1 Activity Center
®
Screw (8)
Mu ic lid with
circuit board
Ball
Bolt (5)
Stand (3)
Mu ic
button (3)
Hou e
(3 part )
Seat ring
Phone and
people toy
Page
retainer
FOR ADDITIONAL IMPORTANT
INFORMATION, plea e ee the
Helpful Hint and Care and
Maintenance ection in the e
in truction .
Toddler Mode
in truction
Page artwork
Entertainer ®Toddler
Conversion Instructions
Model 4650
Unfold in truction heet completely and review tep
before beginning conver ion of your Entertainer ®.
INFANT
SETUP
Upper leg (3)
Tray (2 part )
Ba e
2 3 4
© 2000 Graco 651-3-00 651699
Congratulations on your purchase of a
Graco®Entertainer®activity center!
Graco i the recognized leader in the
de ign and manufacture of quality baby
product . We believe your new Graco®
Entertainer®activity center i a wi e choice,
promi ing many hour of enjoyment for
your baby.
Before u ing your activity center, plea e
take a few minute to read thi Owner
Manual. The hort time you pend reading
the e in truction will help you to u e your
activity center properly.
Customer Satisfaction
Our goal i to make every product the be t it
can be! We are al o committed to upporting our
product after purcha e. If you would like to peak
to Graco about your product, plea e contact our
Cu tomer Service Department at 1-800-345-4109
or vi it our Internet web ite, www.gracobaby.com.
Our knowledgeable taff will be ready to an wer
any que tion you may have concerning part , u e
or maintenance. When you call, plea e have the
model and serial numbers ready o your call
may be proce ed quickly and efficiently.
Model No. __________
Serial No. __________
Dear Cu tomer,
Plea e fill in the
model and erial
number above
from the label
under the tray
of your new
Entertainer®
activity center.
OWNERS MANUAL
PARTS LIST
CHECK that you have all the part li ted below
BEFORE a embling. If any part are mi ing,
call Cu tomer Service at 1-800-345-4109
or vi it our Internet web ite, www.gracobaby.com.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Tool required: Phillip crewdriver
Model 4650
Butterfly
wand
Loop and ring
Seat
Ball holder
(2 part )
Cup
Page (3 large,
3 mall halve )
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THIS PRODUCT.
If you experience any difficultie , plea e contact the Cu tomer Service Department.
KEEP INSTRUCTIONS FOR FUTURE USE.
IN CLOSED-TRAY INFANT MODE, thi product i for u e only by a child who i able
to it upright una i ted but unable to walk, weigh le than 30 pound , and i le
than 32 inche tall. IN OPEN-TRAY TODDLER MODE, thi product i for u e only by
a child who i able to walk.
EXCESSIVE EXPOSURE TO SUN OR HEAT could cau e fading or warping of part .
DO NOT USE THIS PRODUCT if it i damaged or broken.
String can cau e trangulation! DO
NOT place item with a tring around
your child neck, uch a hood
tring or pacifier cord . DO NOT
u pend tring over the activity
center or attach tring to toy .
Never leave child unattended. Alway
keep child in view while in product.
Never lift or carry thi product with
child in it.
Product may gradually move acro
the floor a child play in it. Watch for
movement of product and be ure
child tay away from hazard in the
area uch a tair , cord , hot liquid ,
pool , ource of heat and anything
el e that may injure your child. Never
u e near tair .
Do not u e product in clo ed-tray
infant mode with a child who can tip
over or climb out of product.
To avoid tipover , place product on
flat, level floor/ground. Adju t leg to
ame height o that the tray i level
before placing child in product.
Do not u e in open-tray toddler mode
unle leg are et to lowe t po ition.
Convertible Entertainer
2-in-1 Activity Center
®
Screw (8)
Mu ic lid with
circuit board
Ball
Bolt (5)
Stand (3)
Mu ic
button (3)
Hou e
(3 part )
Seat ring
Phone and
people toy
Page
retainer
FOR ADDITIONAL IMPORTANT
INFORMATION, plea e ee the
Helpful Hint and Care and
Maintenance ection in the e
in truction .
Toddler Mode
in truction
Page artwork
Entertainer ®Toddler
Conversion Instructions
Model 4650
Unfold in truction heet completely and review tep
before beginning conver ion of your Entertainer ®.
INFANT
SETUP
Upper leg (3)
Tray (2 part )
Ba e
6 7 85
651-3-00 651699
1. Thread cord attached to
dog phone through the two
hole found on each of the
three people figure . In ert
end of cord into mall hole
on tray a hown.
Tie a knot under the tray to
hold cord in place.
2. Pu h three ring pa t the
bump onto the ring loop,
and in ert end of ring loop
into the two hole in tray a
hown. Push down firmly
until loop snaps in place.
3. Remove and immediately
discard the pla tic pull tab
on the printed circuit board.
Attach three mu ic button
over circuit board in mu ic
lid. For each button, fir t put
front end of button into lid o
tooth fit into lot in lid, then
pu h down back of button o
it nap onto peg . Chec
that both front and bac of
each button are snapped
in place.
Snap peg of lid into hole
at both ide of the torage
compartment in tray.
4. A emble the hou e. Put
lower pivot pin of door into
hole in hou e ba e. Align
roof over ba e o upper pin
of door fit into hole at ide
of doorway. Holding piece
together, turn a embly
up ide down, locate the four
crew hole , and fa ten with
four crew . Do not over-
tighten crew .
After hou e i a embled,
align hou e over round end
of tray halve o mirror face
center of tray. In ert ba e of
hou e into the four lot , and
turn clockwi e until hou e i
latched to tray.
To Assemble Your Convertible
Entertainer®Activity Center
Step 1.
Po ition three tand under
ba e a hown, and pu h
down on ba e until tand
nap in place.
Stand can fold flat under
ba e to permit rocking.
Step 2.
With notch at bottom of
upper leg a hown, pu h
in the button on front of
each lower leg and in ert
an upper leg ection until it
nap into one of three
height for infant u e. Set all
three leg to ame height.
Step 3.
Turn two halve of tray
up ide down. Put the end
of tray with an A printed
on it in ide the end with a
B. Fa ten end A and
B to each other with four
Phillip head crew . Do
not overtighten crew .
Snap the other two end of
tray together o it form a
clo ed circle in the center
of the tray.
Step 4.
Turn tray right ide up.
Pu h five large pla tic bolt
into the five hole a hown
until they nap in place.
Step 5.
Place tray on top of leg o
that snapped ends of tray
are in front of the Graco®
name on the base, and
bolt in circle at back of tray
goe into back leg on the
ba e. Align other two bolt
with hole in the leg .
Fa ten all three bolt .
Chec that bolt are ecure
by pulling up on tray.
Step 6.
Place folded Toddler Unit
Conver ion In truction into
clear pla tic eat pocket.
Step 7.
Put cloth eat in ide the eat
ring a hown. Toddler Unit
in truction mu t face high
ide of eat ring a hown.
Attach eat to the eat ring
by wrapping top edge of eat
around eat ring. Under the
eat ring, nap the grommet
onto the peg a hown.
Tuck the seam on both ide
of the cloth eat between the
outside of the ring and the
pla tic partition a hown.
Chec that edge of cloth
seat does not cover
wheels or partitions.
Step 8.
Turn the eat over and pu h
eat down into the eat ring.
Step 9.
Snap the eat ring onto the
tray. Pu h down all around
eat to make ure it i
completely napped onto the
tray. Seat mu t turn freely.
Toddler Unit
in truction
Grommet
5. Align cup over large t hole
in tray o cup handle i next
to the hou e. Snap pin of
cup into hole in tray.
6. Snap together the two
halve of ball holder a
hown. Spread end apart
and attach ball by in erting
two pin on ball holder into
hole in ball.
Holding ball/ball holder
a embly together, pu h
holder down into tray a
hown until it nap in place.
7. Cut out the double- ided
picture from included artwork,
or u e your own picture .
In ert a picture into maller
half of each clear pla tic
page, then nap mall and
large halve together.
In ert one peg of each page
into one of the three hole in
tray a hown. In ert other
peg into corre ponding hole
in pla tic page retainer. Snap
retainer into lot in tray.
To open page to replace
picture , in ert a coin into
the center lot and pry it
open a hown.
8. Pu h end of butterfly
wand firmly into remaining
hole on tray a hown until it
nap in place.
Bump
Snapped
end in front
Bolt in
circle
Back leg
High
ide of
ring
Seam behind
partition
Step 10.
Refer to illu tration below to attach
toy to tray. Detailed a embly
in truction follow.
Notch PUSH
6 7 85
651-3-00 651699
1. Thread cord attached to
dog phone through the two
hole found on each of the
three people figure . In ert
end of cord into mall hole
on tray a hown.
Tie a knot under the tray to
hold cord in place.
2. Pu h three ring pa t the
bump onto the ring loop,
and in ert end of ring loop
into the two hole in tray a
hown. Push down firmly
until loop snaps in place.
3. Remove and immediately
discard the pla tic pull tab
on the printed circuit board.
Attach three mu ic button
over circuit board in mu ic
lid. For each button, fir t put
front end of button into lid o
tooth fit into lot in lid, then
pu h down back of button o
it nap onto peg . Chec
that both front and bac of
each button are snapped
in place.
Snap peg of lid into hole
at both ide of the torage
compartment in tray.
4. A emble the hou e. Put
lower pivot pin of door into
hole in hou e ba e. Align
roof over ba e o upper pin
of door fit into hole at ide
of doorway. Holding piece
together, turn a embly
up ide down, locate the four
crew hole , and fa ten with
four crew . Do not over-
tighten crew .
After hou e i a embled,
align hou e over round end
of tray halve o mirror face
center of tray. In ert ba e of
hou e into the four lot , and
turn clockwi e until hou e i
latched to tray.
To Assemble Your Convertible
Entertainer®Activity Center
Step 1.
Po ition three tand under
ba e a hown, and pu h
down on ba e until tand
nap in place.
Stand can fold flat under
ba e to permit rocking.
Step 2.
With notch at bottom of
upper leg a hown, pu h
in the button on front of
each lower leg and in ert
an upper leg ection until it
nap into one of three
height for infant u e. Set all
three leg to ame height.
Step 3.
Turn two halve of tray
up ide down. Put the end
of tray with an A printed
on it in ide the end with a
B. Fa ten end A and
B to each other with four
Phillip head crew . Do
not overtighten crew .
Snap the other two end of
tray together o it form a
clo ed circle in the center
of the tray.
Step 4.
Turn tray right ide up.
Pu h five large pla tic bolt
into the five hole a hown
until they nap in place.
Step 5.
Place tray on top of leg o
that snapped ends of tray
are in front of the Graco®
name on the base, and
bolt in circle at back of tray
goe into back leg on the
ba e. Align other two bolt
with hole in the leg .
Fa ten all three bolt .
Chec that bolt are ecure
by pulling up on tray.
Step 6.
Place folded Toddler Unit
Conver ion In truction into
clear pla tic eat pocket.
Step 7.
Put cloth eat in ide the eat
ring a hown. Toddler Unit
in truction mu t face high
ide of eat ring a hown.
Attach eat to the eat ring
by wrapping top edge of eat
around eat ring. Under the
eat ring, nap the grommet
onto the peg a hown.
Tuck the seam on both ide
of the cloth eat between the
outside of the ring and the
pla tic partition a hown.
Chec that edge of cloth
seat does not cover
wheels or partitions.
Step 8.
Turn the eat over and pu h
eat down into the eat ring.
Step 9.
Snap the eat ring onto the
tray. Pu h down all around
eat to make ure it i
completely napped onto the
tray. Seat mu t turn freely.
Toddler Unit
in truction
Grommet
5. Align cup over large t hole
in tray o cup handle i next
to the hou e. Snap pin of
cup into hole in tray.
6. Snap together the two
halve of ball holder a
hown. Spread end apart
and attach ball by in erting
two pin on ball holder into
hole in ball.
Holding ball/ball holder
a embly together, pu h
holder down into tray a
hown until it nap in place.
7. Cut out the double- ided
picture from included artwork,
or u e your own picture .
In ert a picture into maller
half of each clear pla tic
page, then nap mall and
large halve together.
In ert one peg of each page
into one of the three hole in
tray a hown. In ert other
peg into corre ponding hole
in pla tic page retainer. Snap
retainer into lot in tray.
To open page to replace
picture , in ert a coin into
the center lot and pry it
open a hown.
8. Pu h end of butterfly
wand firmly into remaining
hole on tray a hown until it
nap in place.
Bump
Snapped
end in front
Bolt in
circle
Back leg
High
ide of
ring
Seam behind
partition
Step 10.
Refer to illu tration below to attach
toy to tray. Detailed a embly
in truction follow.
Notch PUSH
10 119
651-3-00 651699
To Adjust the Seat Height
Do not adjust height while child is in
activity center.
Step 1.
Pre in the button on each
leg to adju t eat to de ired
height.
For your
childs safety, all three legs
must be set to the same
height. Tray must be level.
Step 5.
Ball holder: Squeeze latche under tray to relea e
ball holder.
Pull ball holder out of tray. Open ball holder to
remove ball. Put ball into cup. Turn ball holder
up ide down and rein ert into tray a a cup holder.
Pu h it all the way down onto tray.
Step 6.
Wand: Pull up on handle of butterfly wand to
detach it from tray for toddler to play with. Do not
pull butterfly off handle.
Step 7.
Seat: Store in a afe place, not expo ed to un or
heat, in ca e you wi h to convert back to an infant
etup in the future.
Your Entertainer®hould now look like the open-tray
toddler mode below.
B. Convert toys for toddler use
Step 1.
House: Replace on tray with
mirror facing out ide of unit. Turn
ba e counterclockwi e to fa ten
it to tray.
Step 2.
Shape toys: Untie tring under
tray and remove them. (Shape
fit into different opening in
hou e.) Replace tring, attached
only to phone, and retie again
under tray.
Step 3.
Ring loop: Remove by pulling end lightly apart under
tray and pu hing loop up. Remove ring . Turn loop up ide
down. From under ide of tray, in ert end of loop back into
hole and pu h up until peg end nap in place. Put ring
onto peg .
Step 4.
Cup: Reach underneath tray, wrap finger around cup, and
queeze toward you with both hand to relea e pivot pin of
cup from hole in tray. Turn cup around o handle i away
from hou e a hown, and reattach to tray. Cup now can
pivot to drop ball onto ball track beneath.
Step 2.
Turn hou e/mirror toy o that rib
on ba e of hou e ( ee clo eup)
line up with arrow on tray. Lift
hou e to remove.
Step 3.
Un crew the three large pla tic
bolt attaching tray to leg . Do
not try to pull bolt out of tray.
Remove tray from legs.
Step 4.
Underneath tray, pull back finger latch where the two halve
of tray meet. While holding latch, lift right ide of tray up to
relea e it from left half. Pull tray open.
Step 5.
For each leg: (1) pu h and hold in the leg button; (2) pu h
leg down to the lowest po ition. (Top of inner leg ection
must be lightly below top edge of outer leg.)
Tipping or fall hazard. Do not use in
toddler mode unless legs are set to lowest position.
Step 6.
Place open tray over ba e o
Graco®name i een through
opening in tray a hown. Align
bolt over hole in leg .
Starting with bolt under the hou e,
partially tighten all bolt (to allow
alignment), then fully tighten.
Be sure bolts are tight. Pull up tray at each bolt to ma e
sure it is attached to leg.
Tray at proper height
Step 2.
After adju ting height of the eat, CHECK that your
child feet can re t completely on the floor of your
activity center. Tray hould not be too high or too low.
Remove child and readju t height if nece ary.
TRAY TOO HIGH TRAY TOO LOW
To Convert Your Convertible
Entertainer®for Toddler Use
When your child i able to walk, you can convert your
Entertainer®into the toddler mode. Thi open tray
arrangement, along with changing the toy to allow new
activitie , can give your child a whole new play experience.
A. Change base and tray
Step 1.
From top of eat, reach
through the leg opening a
hown and pull pla tic tab
(al o found at back and front
of eat) lightly inward while
lifting eat to remove.
Lift
Leg must be
at thi height!
1. Pu h in
2. Pu h
down
Partially tighten
this bolt fir t
Mirror face
out ide of unit
Pull pin out
12
10 119
651-3-00 651699
To Adjust the Seat Height
Do not adjust height while child is in
activity center.
Step 1.
Pre in the button on each
leg to adju t eat to de ired
height.
For your
childs safety, all three legs
must be set to the same
height. Tray must be level.
Step 5.
Ball holder: Squeeze latche under tray to relea e
ball holder.
Pull ball holder out of tray. Open ball holder to
remove ball. Put ball into cup. Turn ball holder
up ide down and rein ert into tray a a cup holder.
Pu h it all the way down onto tray.
Step 6.
Wand: Pull up on handle of butterfly wand to
detach it from tray for toddler to play with. Do not
pull butterfly off handle.
Step 7.
Seat: Store in a afe place, not expo ed to un or
heat, in ca e you wi h to convert back to an infant
etup in the future.
Your Entertainer®hould now look like the open-tray
toddler mode below.
B. Convert toys for toddler use
Step 1.
House: Replace on tray with
mirror facing out ide of unit. Turn
ba e counterclockwi e to fa ten
it to tray.
Step 2.
Shape toys: Untie tring under
tray and remove them. (Shape
fit into different opening in
hou e.) Replace tring, attached
only to phone, and retie again
under tray.
Step 3.
Ring loop: Remove by pulling end lightly apart under
tray and pu hing loop up. Remove ring . Turn loop up ide
down. From under ide of tray, in ert end of loop back into
hole and pu h up until peg end nap in place. Put ring
onto peg .
Step 4.
Cup: Reach underneath tray, wrap finger around cup, and
queeze toward you with both hand to relea e pivot pin of
cup from hole in tray. Turn cup around o handle i away
from hou e a hown, and reattach to tray. Cup now can
pivot to drop ball onto ball track beneath.
Step 2.
Turn hou e/mirror toy o that rib
on ba e of hou e ( ee clo eup)
line up with arrow on tray. Lift
hou e to remove.
Step 3.
Un crew the three large pla tic
bolt attaching tray to leg . Do
not try to pull bolt out of tray.
Remove tray from legs.
Step 4.
Underneath tray, pull back finger latch where the two halve
of tray meet. While holding latch, lift right ide of tray up to
relea e it from left half. Pull tray open.
Step 5.
For each leg: (1) pu h and hold in the leg button; (2) pu h
leg down to the lowest po ition. (Top of inner leg ection
must be lightly below top edge of outer leg.)
Tipping or fall hazard. Do not use in
toddler mode unless legs are set to lowest position.
Step 6.
Place open tray over ba e o
Graco®name i een through
opening in tray a hown. Align
bolt over hole in leg .
Starting with bolt under the hou e,
partially tighten all bolt (to allow
alignment), then fully tighten.
Be sure bolts are tight. Pull up tray at each bolt to ma e
sure it is attached to leg.
Tray at proper height
Step 2.
After adju ting height of the eat, CHECK that your
child feet can re t completely on the floor of your
activity center. Tray hould not be too high or too low.
Remove child and readju t height if nece ary.
TRAY TOO HIGH TRAY TOO LOW
To Convert Your Convertible
Entertainer®for Toddler Use
When your child i able to walk, you can convert your
Entertainer®into the toddler mode. Thi open tray
arrangement, along with changing the toy to allow new
activitie , can give your child a whole new play experience.
A. Change base and tray
Step 1.
From top of eat, reach
through the leg opening a
hown and pull pla tic tab
(al o found at back and front
of eat) lightly inward while
lifting eat to remove.
Lift
Leg must be
at thi height!
1. Pu h in
2. Pu h
down
Partially tighten
this bolt fir t
Mirror face
out ide of unit
Pull pin out
12
13
651-3-00 651699
Replacement Parts
Instructions for ordering activity center parts:
Complete form below. Your model number MUST be
included on the form to en ure proper replacement
part . Your model number can be found on a
stic er on the bottom of the tray. Payment must
accompany your order.
Model No. (required)
Serial No. (required)
SHIP TO:
Name
Addre
City, State, Zip
( )
Telephone
Check enclo ed
(payable to Graco Children
Product Inc.)
Charge to credit card:
Vi a
Ma terCard
Di cover
Account #:
Expiration date:
Signature:
Dog phone & people
Loop & ring
Mu ic lid & button
Hou e with mirror
Cup
Ball & ball holder
Page & page retainer
Butterfly wand
Stand
Cloth eat
Pla tic bolt & crew
Seat ring and bearing
Complete tray unit
Complete ba e unit
Parts List:
Dog phone and people toy ......................
Loop and ring ..........................................
Mu ic lid and button ................................
Hou e with mirror ......................................
Cup ...........................................................
Ball and ball holder ...................................
Page ( et of 3) and page retainer ............
Butterfly wand ...........................................
Stand ( et of 3) ........................................
Cloth eat ..................................................
Pla tic bolt ( et of 5) and crew ............
Seat ring and bearing ..............................
Complete tray unit (no toy ) ......................
Complete ba e unit (no toy ) ....................
Price:*
$ 5.00
$ 5.00
$ 7.00
$ 6.00
$ 5.00
$ 5.00
$ 6.00
$ 5.00
$ 5.00/ et, n/c for 1
$ 15.00
$ 5.00
$ 10.00
$ 25.00
$ 20.00
* Price ubject to change
without notice.
CARE AND MAINTENANCE
FROM TIME TO TIME CHECK YOUR ACTIVITY CENTER
for loo e crew , worn part , torn material or titching.
Replace or repair the part a needed. U e only Graco®
replacement part .
REMOVABLE CLOTH SEAT may be machine wa hed in
lukewarm water on delicate cycle and drip-dried. DO NOT
MACHINE DRY. NO BLEACH.
TO CLEAN FRAME, u e only hou ehold oap or detergent
and warm water. NO BLEACH. U e only a damp cloth to
clean the mu ic button .
IF YOU NEED HELP
If you have any que tion or if you need any part
not li ted, plea e call toll-free:
1-800-345-4109
or vi it our Internet web ite, www.gracobaby.com.
Return the form below with payment to:
GRACO CHILDRENS PRODUCTS INC.
CUSTOMER SERVICE DEPARTMENT
P.O. BOX 100, MAIN STREET
ELVERSON, PA 19520
14
Subtotal:
Shipping
& handling*: $5.00
6% ale tax
(PA only):
Total:
*$15.00 out ide the continental U.S.
Other Graco Baby Gym manuals
