Graco 217075 Operation manual

7642b
307476F
PROVEN QUALITY, LEADING TECHNOLOGY
Important Safety Instructions
Read all warning and instructions in this
manual. Save these instructions.
Instructions--Parts List
Filter-Regulator
Assembly
Model 217075
200 psi (1.4 MPa, 14 bar) Maximum Working Pressure

2 307476
Table of Contents
Warnings 2......................................
Installation 3.....................................
Operation 3.....................................
Service 4.......................................
Accessory Automatic Drain 4......................
Parts 5.........................................
Dimensions 6....................................
Graco Warranty 8................................
Graco Phone Number 8...........................
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
corresponding instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result
in a serious injury.
DThis equipment is for professional use only.
DRead all instruction manuals, tags, and labels before operating the equipment.
DUse the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.
DCheck the equipment daily. Repair or replace worn or damaged parts immediately.
DDo not exceed the maximum working pressure of the lowest rated system component. This equip-
ment has a 125 psi (0.9 MPa, 9 bar) maximum working pressure.
DRoute the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do not
expose Graco hoses to temperatures above 180_F(82_C) or below --40_F(--40_C).
DUse fluids or solvents that are compatible with the equipment wetted parts. See the Technical
Data section of all the equipment manuals. Read the fluid and solvent manufacturer’s warnings.
DWear hearing protection when operating this equipment.
DComply with all applicable local, state and national fire, electrical and other safety regulations.
PRESSURIZED EQUIPMENT HAZARD
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin
and cause serious injury.
DDo not stop or deflect fluid leaks with your hand, body, glove, or rag.
DFollow the Pressure Relief Procedure in your separate equipment manuals whenever you: are
instructed to relieve the pressure; stop spraying; clean, check, or service the equipment; and install
or clean the fluid nozzle.
DTighten all the fluid connections before operating the equipment.
DCheck the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.
Permanently coupled hoses cannot be repaired; replace the entire hose.

3307476
Installation
Mount the filter-regulator in a convenient location, near
the equipment it is to serve. Mark and drill two 1/4 in.
(6 mm) holes in the wall. The Dimensional Drawing of
the filter-regulator is given on page 6. Fasten the
filter-regulator to the wall with the brackets (2) and 1/4
in. bolts.
A bleed-type master shutoff valve should be installed
in the air line between the filter-regulator and the
source of the air supply.
Operation
Graco wall mounted air filter-regulators are designed to
assure delivery of accurately controlled, clean, dry air
to the spray guns and other air operated equipment.
Two regulated air outlet valves (A) permit the use of
two spray guns at separate pressures. See Fig. 1. Line
pressure air is available through the two outlet valves
(B).
The air pressure can be adjusted at the regulators (1)
from 0--125 psi (0--0.9 MPa, 0--9 bar). The air inlet (C)
to the filter-regulator is 1/2 npt female. See Fig. 2. The
four shut-off valve outlets (A & B) have an individual
1/4 npt male thread.
Regulate the air pressure by turning the handles of the
regulators clockwise for higher pressure, and counter-
clockwise for lower pressure.
CAUTION
Do not exceed 125 psi (0.9 MPa, 9 bar) regulated
pressure. Pressures higher than 125 psi (9 bar)
could damage the gauge (3).
Fig. 1

4 307476
Service
Drain the water and oil daily or when level first appears
in the sight tube (E) by opening the drain cock (F)
(clockwise to open) with the air turned OFF.
Check the filter element (G) regularly. Schedule clean-
ing by the amount of use and the condition of the air
supply and the air supply lines. Replace the filter
element if it is contaminated, or if a pressure drop is
noticed.
Fig. 2
7643A
C
G
E
F
Accessory Automatic Drain
WARNING
Make sure the air pressure to the filter-regulator is
off prior to the installation of the automatic drain.
An Accessory Automatic Drain (Part No. 106151) is
available for this assembly.
As water is accumulated in the bottom of the filter
bowl, the float assembly (H) is lifted off its seat, allow-
ing the water to drain from the filter automatically. See
Fig. 3.
Install the automatic drain by unscrewing the lower
filter housing from the upper filter housing, and drain
cock from the lower filter housing.
Fig. 3
7644A
H

5307476
Parts
7645b
6
2
3
*9
4
8
10
7
5
16
7
Ref.
No. Part No. Description Qty.
1 104267 REGULATOR, air; 0--125 psi
(0--0.9 MPa, 0--9 bar); 1/2 npt(fbe)
See instruction manual 307204 2
2 106145 BRACKET, mounting 2
3 160430 PRESSURE GAUGE, air;
100 psi (0.7 MPa, 7 bar); 1/4 npt 2
4 161821 NIPPLE, 1/2 npt(mbe) x 1/4 npt (f) 2
5 166999 ELBOW, street, reducing; 1/2 npt(m)
x 1/4 npt(f) 2
6 208390 BALL VALVE, 500 psi (3.5 MPa,
35 bar); 1/4 npt mbe; See manual
307068 4
Ref.
No. Part No. Description Qty.
7 156823 UNION, swivel; 1/4 npt(m) x 1/4 (f) 4
8 217074 FILTER, air; 1/2 npt(fbe), 40 micron
element, 8 oz; Includes item 9 1
9* 100960 PRESSURE GAUGE
0--200 psi (0--1.4 MPa, 0--14 bar),
1/4 npt(m) 1
10 113336 ADAPTER 1
* Sold separately.

6 307476
Dimensions
ti39004a

7307476
Notes

8 307476
Graco Warranty
Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale by an to the original purchaser for use. With the exception of any special extended or
limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the
equipmentdetermined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained
in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution ofnon-Graco component parts. Nor shall Graco be liable for malfunction, damage orwear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance or structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipmentwill be returned to the originalpurchasertransportation prepaid. Ifinspection ofthe equipment does notdisclose anydefect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
Graco’s sole obligation and buyer’s sole remedy forany breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequentialdamages for lost profits, lost sales,injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT
NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, gas engines,
switches, hose, etc.), are subject to the warranty, if any, of theirmanufacturer. Graco willprovide purchaserwith reasonable assistance
in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties
reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures
judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Phone Number
TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:
Phone: [phone] or Toll Free: 800--328--0211; Fax: [phone]
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
This manual contains English. MM 307476
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440--1441
Copyright 1997, Graco Inc. is registered to I.S. EN ISO 9001
www.graco.com
Revised 10/2020