Graco LiteRider 6989 User manual

13
785-7-00
Replacement Parts
Instructions for ordering stroller parts:
Complete form below. Your stroller model number MUST be
included on the form to ensure proper replacement parts.
Your model number can be found on a sticker on the
rear leg of your stroller. Payment must accompany
your order.
Return the form below with payment to:
GRACO CHILDREN’S PRODUCTS INC.
CUSTOMER SERVICE DEPARTMENT
P.O. BOX 100, MAIN STREET
ELVERSON, PA 19520
IF YOU NEED HELP
If you have any questions or if you need
any part not listed, please call toll-free:
1-800-345-4109
or visit our Internet website, www.gracobaby.com.
Model Number
(Must be filled in)
SHIP TO:
Name
Address
City, State, Zip
( )
Telephone
Account #:
Expiration date:
Signature:
Parts List:
Canopy ..............................
Seat ...................................
Seat pad ............................
Basket ...............................
Front swivel assembly .......
Rear wheel ........................
Child’s tray ........................
Rear axle assembly ..........
Parent’s tray ......................
Elastic strap ......................
Price:*
$18.00
$21.00
$16.00
$16.00
$16.00
$ 8.00
$13.00
$11.00
$12.00
No charge
* Prices subject to change without notice.
HELPFUL HINTS
IF WHEEL SQUEAKS, use a light
oil (e.g., WD-40, 3-in-1, or sewing
machine oil). It is important to get
the oil into the axle and wheel
assembly as illustrated.
WHEN USING YOUR STROLLER AT THE
BEACH, completely clean your stroller afterward to
remove sand and salt from mechanisms and wheel
assemblies.
TO STAND FOLDED STROLLER, lock the brakes.
CARE AND MAINTENANCE
TO CLEAN THE SEAT, remove the screws and
plastic clasps and hand wash in warm water with
a mild detergent. Drip dry only—seat contains plas-
tic inserts. Replace seat on frame with screws and
clasps when dry.
REMOVABLE SEAT PAD (if so equipped) may
be machine washed in lukewarm water on delicate
cycle and drip-dried. NO BLEACH.
FROM TIME TO TIME CHECK YOUR STROLLER
for loose screws, worn parts, torn material or stitch-
ing. Replace or repair the parts
as needed. Use only Graco® replacement parts.
TO CLEAN STROLLER FRAME, use only
household soap or detergent and warm water.
NO BLEACH.
EXCESSIVE EXPOSURE TO SUN OR HEAT
could cause fading or warping of parts.
Step 6.
Pull elastic strap through vehicle
belt hook on one side of the
safety seat. Check that plastic
tab at end of strap securely holds
the safety seat.
Step 7.
Pull up on safety seat handle to
be sure the safety seat is securely
attached to the stroller.
To remove safety seat from the stroller, remove elastic
strap from vehicle belt hook, squeeze release handle
at back of safety seat, and lift safety seat out of the
stroller.
Total:
Shipping
& handling: $5.00
6% sales tax
(PA only):
Total amount
due:
14
Check enclosed
(payable to Graco Children’s
Products Inc.)
Charge to credit card:
Visa
MasterCard
Discover
Canopy
Seat
Seat pad
Basket
Front swivel
assembly
Rear wheel
Child’s tray
Rear axle
assembly
Parent’s tray
Elastic strap

234
© 2000 Graco 785-7-00
Failure to follow these warnings and the assembly instructions
could result in serious injury or death.
Avoid serious injury from falling or
sliding out. Always use seat belt.
Be certain the stroller is fully erected
and latched before allowing your
child near the stroller.
Never place child in the stroller with
head toward front of the stroller.
Never leave child unattended.
Always keep your child in view.
DO NOT place purses, shopping
bags, parcels and accessory items
on handle or canopy. They may fall
on the child, or change the balance
of the stroller and make it unstable.
Congratulations on your purchase of a
Graco®stroller!
Graco®is a world leader in strollers and
has helped thousands of parents transport
their children in comfort. We believe your
new Graco®stroller is a wise choice,
promising many hours of enjoyment for
your baby.
Before using your stroller, please take a
few minutes to read this Owner’s Manual.
The short time you spend reading these
instructions will help you assemble and
use your stroller properly.
Please save your Owner’s Manual
for future use.
Customer Satisfaction
Our goal is to make every product the best it
can be! We are also committed to supporting our
products after purchase. If you would like to speak
to Graco about your product, please contact our
Customer Service Department at 1-800-345-4109
or visit our Internet website, www.gracobaby.com.
Our knowledgeable staff will be ready to answer
any questions you may have concerning parts, use
or maintenance. When you call, please have the
model and serial numbers ready so your call
may be processed quickly and efficiently.
OWNER’S
MANUAL
Model No. _________
Serial No. _________
Dear Customer,
Please fill in the
model and serial
numbers above
from the label on
the rear leg of
your new stroller.
Model No. 6989
Stroller
Use of the stroller with a child weigh-
ing more than 40 lbs. (18.1 kg) will
cause excessive wear and stress on
the stroller. Use the stroller with only
one child at a time.
Never use stroller on stairs or escalators.
You may suddenly lose control of the
stroller or your child may fall out. Also,
use extra care when going up or down
a step or curb.
Avoid strangulation. DO NOT place
items with a string around your
child’s neck, suspend strings from
this product, or attach strings to toys.
FOR ADDITIONAL IMPORTANT
INFORMATION, please see the
Helpful Hints and Care and
Maintenance sections in these
instructions.
TO PREVENT A HAZARDOUS CONDITION, do not place more than 10 lbs.
(4.5 kg) in the storage basket or more than 2 lbs. (0.9 kg) in the canopy bag.
DO NOT ALLOW YOUR CHILD to stand on the basket. It may collapse and
cause injury.
NEVER ALLOW YOUR STROLLER to be used as a toy.
STROLLER TO BE USED only at walking speed. Product not intended for use
while jogging, skating, etc.
DISCONTINUE USING YOUR STROLLER should it become damaged or broken.
DO NOT lift the stroller by the
child’s tray.

5
785-7-00 6 87
PARTS LIST
CHECK that you have all the parts listed below
BEFORE assembling your stroller.
If any parts are missing,
call Customer Service at 1-800-345-4109
or visit our Internet website, www.gracobaby.com.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Frame
Rear wheel (2)
Cap
(2, 1 extra)
Front wheel
assembly (2)
Child’s tray
To Unpack Stroller
Step 1.
Flatten stroller carton to protect floor.
Step 2.
Open stroller on carton
until locking latches on
both sides are locked
as shown.
Step 3.
Push down on the footrest
until it snaps onto the bar
under it.
Locking
latch
To Assemble Front Wheels
To prevent
serious injury or death
from choking, remove and
IMMEDIATELY discard plastic
end caps on the front leg pins.
Step 1.
Line up pin with a wheel
assembly as shown. Plastic snap
inside wheel mount must be
away from pin.
Step 2.
Push wheel assembly onto pin
until it snaps into place.
Step 3.
Repeat for other wheel assembly.
Pull firmly on each wheel assembly to be sure the
wheel assemblies are securely attached.
End cap
To Assemble Rear Axle
To prevent serious injury or death from
choking, remove and immediately discard the plastic
covers on the axle.
Step 1.
Turn stroller over as pictured above.
Step 2.
Position rear axle assembly as shown.
Step 3.
Push both brackets on until plastic tabs snap into the slots
on the legs.
Pull firmly on each bracket to be sure the brackets are
securely attached.
To Unfold Stroller
Step 1.
Release storage latch and
begin opening stroller.
Step 2.
Continue unfolding until both
latches lock.
To Use Brakes
Always apply brakes when parking
stroller.
Push DOWN to park.
Check to make sure brake
is on by pushing the stroller.
Lift brake levers UP to stroll.
To Secure Your Child
Avoid serious injury from falling or
sliding out. Always use seat belt.
Step 1.
Place crotch strap between
legs and fasten both belt
buckles together.
Step 2.
Adjust belt at both buckles as needed to get a snug fit
around your child.
Step 3.
Squeeze sides of buckles to
release.
Plastic
snap
Rear axle assembly
Retainer
(2, 1 extra)
Parent’s tray
(on certain models—
screwdriver required
for assembly)
To Use Head Supports
To use stroller with a smaller
child, pull the plastic pieces
from pockets located in the
back of the cloth seat pad,
and reinsert them with curved
side toward the front.
To use stroller with a larger
child that does not need
head support, insert the plastic
pieces with the curved side
toward the back.
Back of cloth seat pad
To Assemble Rear Wheels
Place one rear wheel, red retainer, and white cap on one end
of rear axle in order as shown below. Push red retainer onto
axle BEFORE attaching white cap. Repeat on other side.
Snap red retainer into axle
groove. Then snap cap
over red retainer as shown.
Be sure cap is snapped securely over red retainer.
Rear
axle Retainer (red)
Wide end
toward wheel
Wheel
Cap (white)
Attach AFTER
retainer is on axle
Spokes
toward
inside
Rear legs
Brake levers
point toward
you
Remove
end caps

9
785-7-00 10 11 12
To Adjust Back
Step 1.
Pull up on the wire behind the
seat to fully recline it.
Step 2.
After seat is fully reclined, lift
seat upwards until it locks into
one of the other positions.
Fabric caught
in the latches may prevent
them from locking. When
returning seat to upright
position, do not allow fabric
to be pinched in the latch.
To Adjust Canopy
Push or pull canopy to desired
position.
To Change to Swivel
or Non-swivel Wheels
Front swivel wheels lock for use on uneven surfaces such
as grass, stones or gravel.
Before locking swivels, first push stroller forward a few
feet to ensure that the wheels are correctly positioned.
Slide DOWN for swivel. Slide UP for non-swivel.
To Use Child’s Tray
Always secure your child with the
seat belt. The child’s tray is not a restraint device.
DO NOT lift the stroller by
the child’s tray.
Use care when clamping the
child’s tray on the stroller
with a child in the stroller.
Snap the child’s tray under the
fold latch on both leg tubes as
shown.
To Fold Stroller
Step 1.
Before folding stroller, fold
canopy and recline seat. Apply
brakes to prevent stroller from
moving.
Step 2.
1. Slide red button on handle to the right.
2. Twist grip away from yourself until it stops.
3. Push stroller handle down.
OR
Pull latches up to release
and fold handle down.
Step 3.
Close and lock storage latch.
To Adjust Leg Rest
Push in the buttons at both
sides of the leg rest. While
holding buttons in, move leg
rest up or down to desired
position.
To avoid burns, never put hot liquids in
the parent’s tray. To prevent tipping over, do not place
more than 3 lbs. (1.4 kg) on the parent’s tray.
Step 1.
Remove the two screws found on top of the stroller handle
tubing just above the canopy. Do not remove canopy
screws.
Step 2.
Fold the tray on its “hinge”
several times to break in
the hinge.
Step 3.
Snap parent’s tray to stroller
handle as shown. Reinsert
screws, attaching tray to handle.
To Use Parent’s Tray
Hinge
To Attach the Graco®
Safety Seat (on certain models)
Improper use of this stroller with a
carrier may result in serious injury or death.
Do not use this stroller with a safety seat that is not
the Graco®brand.
Read the owner’s manual provided with your
Graco®safety seat before using the seat with this
stroller.
If you do not have the owner’s manual for the
Graco®safety seat, call Graco at 1-888-224-6549.
Make sure the stroller is fully assembled according to
the preceding instructions.
Step 1.
If the stroller is folded, unfold it and RECLINE the
stroller seat back to its lowest position.
Step 2.
Push down on the tray to be sure it is securely attached
to the stroller.
Step 3.
If your child is already in the safety seat because you
have been using it as a carrier, make sure child is
secured with the harness.
Always secure your child with the
safety seat harness when using the safety seat in
the stroller.
Step 4.
Move the carrier handle
into the carrying position.
Step 5.
Position the carrier so that
the mounting notches fit over
the edge of the arm bar or
tray. Push down on carrier
until the attachment latch
snaps into the arm bar or
tray.
See following page...
Ë
Ê
Ë
Ì