Granberg InDiago 510 Series User manual

2020-05-14
User manual InDiago 510
Products
Height adjustable frames for wall cabinets
Wall Cabinet Lift - InDIAGO
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

Content
1. Introduction
2. Declaration of Conformity with EU-directive
3. Intended use
4. Technical data
5. Safe use
6. Safety arrangements
7. Load distribution and side forces
8. Actions after use
9. Instructions for recycling
10. Fault finding
11. Spare parts list
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

1. Introduction
We have the pleasure to deliver a Granberg InDiago 510 for installation in wall cabinets. This is an electrically
operated lifting and lowering system for installation in new or existing wall cabinets. It can be used separately, or
together with the Granberg work top units, and it becomes then a total adaptation of the kitchen. The lift is suitable
for wall cabinets of various makes, which are made according the standards EN 1116 and EN 1153.
Only authorized persons may use the product!
Authorization means obligation to read and follow the instructions.
It is very important that you read and understands the instructions before you use product.
If you have any questions - contact your supplier.
This Instruction manual shall be available for all concerned persons, be kept in a protected place and shall follow
the product, if it is moved to another installation site or another house or apartment owner.
Correct use, operation, inspections and maintenance are decisive for efficient and safe work.
2. Declaration of Conformity with EU-directive
This product is CE-marked and is granted to conform to the basic safety and operation requirements, in accordance
with de actual Machinery, EMC- and Low voltage Directives. A separate “CE-Declaration of Conformity” is available
in separate document.
3. Intended use
The InDiago 510 intended to achieve a convenient location to put or pick of normal kitchen cabinet items, e.g. dry
groceries and household objects, by means of manoeuvring the shelf system along an arc-shaped path down to the
worktop level below it.
The operation shall be indoors, under normal housing conditions regarding temperature, humidity and lighting.
The Diagonal lift is not intended for use in moist environments. It is assumed that the wall cabinet is made according
the standards EN 1116 and EN 1153.
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

4. Technical data
510KA 510KB 510SA 510SB
Cabinet width 500 - 1000 mm 500 - 1000 mm 500 - 1000 mm 500 - 1000 mm
Cabinet height 700 - 840 mm 700 - 840 mm 850 - 1100 mm 850 - 1100 mm
Cabinet depth, min 260 mm 310 mm 260 mm 310 mm
Vertical stroke, max 540 mm 540 mm 540 mm 540 mm
Horizontal stroke,
max
373 mm 373 mm 373 mm 373 mm
Speed 23 mm / S. 23 mm / S. 23 mm / S. 23 mm / S.
Mains voltage 230 V, max 2,0A 230 V, max 2,0A 230 V, max 2,0A 230 V, max 2,0A
Max number of full
work cycles/ hour 6
6666
Max load in the
internal-cabinet
40 kg 40 kg 40 kg 40 kg
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

5. Safe use
In order to utilise the properties of the InDiago 510 and to prevent and avoid damages it is important that you
carefully read the instructions and operates it in the right way.
The lift is a diagonal lift that lowers an internal cabinet along an arc-shaped path down to the worktop level below
it.
The travel can be stopped at any height.
It is provided with safety arrangements in order to prevent and avoid damages and accidents.
It is however still very important that the operator is well instructed in how to install and operate the liftingsystem.
In the following the lifting system means the lifting machine incl. internal cabinet and the wall cabinet in which the
InDiago 510 is installed.
Only use the lifting system for its intended purpose
The operation and use must be made in such way that there is no risk for damages on persons and property.
The lifting system may only be operated by persons who have read and understood these instructions, and
are authorized to use it.
Be aware of that you as an operator are responsible for that nobody is damaged.
The lifting system and the work area must be in proper condition. The lifting system must not be used if any
fault has appeared which influences the functions or the operation safety. It shall also not be used if it has
been repaired, altered or adjusted without permission of a responsible person.
Make sure that the lifting system is installed on a firm, flat and fully vertical wall, with sufficient attachment
devices for the total weight. Only competent persons shall make the installation.
The Control buttons shall be placed so that the operator has got full view over the lifting system and its
work area when operations are made.
Do not touch any part of the lift when operating it. Only press the button for desired motion direction.
Do not put hands, arms, or any other part of the body or any object into the lifting system when it is brought
from the parking position. The parking position means when the lifting system is fully inside the wall
cabinet, i.e. at the top level.
Keep in mind that when the lifting system has left the parking position the risk increases to get damaged by
the lifting system and the doors.
Do not lower the lifting system unless the space below it is free of persons or objects. In particular if the
lifting system unit is installed above a workbench with adjustable height there is an imminent risk that you
do not notice objects or equipment that might be trapped.
Observe the risk for collision between the lifting system and the Workbench. Note especially the risk to
come in collision with the mixer tap.
Only stable and securely loaded items may be handled. Mind the tilting risk for objects in the cabinet, which
are unstable, e.g. carelessly piled.
Safety devices must not be taken out of service or removed.
Alterations of the lifting system that influence the operational safety or the functions are not allowed.
Decals and markings must not be removed or made illegible.
Do not overload the lifting system.
Always distribute the load within the cabinet, to avoid cantilevered loading. Consider the risk that the load
can roll, slide or fall over.
If the cabinet have no doors the risk is even bigger that objects may fall out of the cabinet.
Use safe and sufficient lifting methods when handling load to and from the lifting system. In particular
beware when handling heavy items, and goods with hazardous content or with sharp corners and edges.
The lifting system unit shall regularly, once a year, be inspected in order to prevent accidents.
The lift may not be operated when there are saucepans/frying pans in use on the cooker, nearby or under
the lifting system. There is a risk that these will fall over if they are hit by the lifting system.
Applicable Building and Safe use Regulations must be complied with.
It is forbidden to stay in wall the cabinet, to hang in the cabinet shelves or to use the lift for lifting of
persons.
Do not use the lifting system as a lifting jack, e.g. for lifting things from the floor.
The machine must not come in direct contact with food
Do not use the lifting system in a potentially explosive environment.
When the operation is in a public location, particularly when children can enter the work area, the operator
shall make satisfactory arrangements to prevent persons from entering the hazardous area when the lift is
being operated, or it has been lowered from the parking position, e.g. by means of blocking the work area or
by means of adding protection devices.
During inspections, service and repair work there shall be no load in the cabinet. It can be necessary to
demount the internal cabinet from the liftin mechanism to carry out service or repair.
Competent persons only must carry out installation, service and repair works.
Only Granberg original spare parts shall be used when replacing any parts. Our warranty commitment can
otherwise be invalidated.
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

6. Safety arrangements
Below the bottom of the internal
cabinet there is a fully covering safety
trip plate. If the trip plate is pressed
the movement will stop. Check the
safety trip plate function often.
7. Load distribution and side forces
Note that the max. rated load means that the load is distributed over the entire cabinet volume. Horizontal forces
are not allowed.
Basic loading requirements:
100 % of the rated load distributed over the entire cabinet volume.
The Centre of Gravity of the load is assumed to be in or under the cabinet centre.
Horizontal forces are not allowed.
Horizontal forces can appear, for example, when pressing onto the shelves or the load.
It is difficult to estimate the size of the actual horizontal force, so utmost care must always be taken.
Further to the incorporated safety arrangements additional can safety actions may be required on or at the Diagonal
lift. Discuss suitable actions with your Granberg representative or with the health and safety inspection.
We recommend that a Risk assessment in accordance with the Machinery Directive shall be made for the actual
working condition.
8. Actions after use
InDiago 510 shall after use be left fully raised to the top level, inside the wall cabinet, the parking position.
Switch off the main switch and lock it in closed position, if unauthorized use can occur.
To prevent unauthorized use can it is also possible to furnish the control panel with a key switch, by means of which
the control circuit is disconnected. It can also is placed inside a lockable cabinet.
9. Instructions for recycling
When Indiago 510 shall be re-used shall it must be cleaned, inspected and go through a full operation test before it
is installed on the new site. We recommend the machine to be sent to Granberg or to the Granberg distributor to get
this done. The machine is manufactured from re-usable materials or from materials that can be recycled.
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

10. Fault finding
The product is designed and tested to achieve optimum operation reliability and long life, provided that the
operation, maintenance and inspections are carried out in accordance with the prescribed instructions. If in spite of
this a fault appears you can get guidance about what to do according to the fault finding list below. Remove the load
from the internal cabinet before fault finding and repair work is carried out. Fault finding, service and repair work
shall made by competent persons only.
Symptom Action
The internal cabinet lift does not move when a control
signal is given
Check that the fuse for the mains feed is not damaged.
Check that the mains plug is connected.
Check that the safety trip panel is not actuated.
Check that the wires are properly fastened in the
control box and in the control button.
If any problem remains after you have taken actions in accordance with the list below you must contact a competent
technician or you supplier.
11. Spare parts list
If any component does not work or has broken, contact your supplier. Only Granberg original spare parts must be
used when replacing any parts. Our warranty commitment may otherwise be invalidated.
Return of spare parts:
Contact Granberg prior to any return of parts.
Do not return any parts that have been worn out during normal operation or accidentally damaged. Only return worn
or damaged parts if it is considered that the fault is covered by our warranty conditions. In such cases, return the
parts without delay, otherwise the right to replacement may be lost.
When ordering spare parts always quote the manufacturing number and type.
Transformer Control button, aluminium Remote control
Powered by TCPDF (www.tcpdf.org)
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se