Grandstream Networks GXV3672_HD Series User manual

GXV3672_HD/FHD User Manual www.grandstream.com
Firmware Version 1.0.1.71 http://esupport.grandstream.com
Grandstream Networks, Inc.
GXV3672_HD/GXV3672_FHD
Outdoor Day/Night IP Camera

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 2 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
TABLE OF CONTENTS
GXV3672_HD/FHD User Manual
WELCOME....................................................................................................................................................4
SAFETY COMPLIANCES................................................................................................................................. 5
WARRANTY..................................................................................................................................................6
CONNECT YOUR GXV3672_HD/FHD......................................................................................................... 7
EQUIPMENT PACKAGE CONTENTS.................................................................................................................7
CONNECTING THE GXV3672_HD/FHD........................................................................................................8
PRODUCT OVERVIEW................................................................................................................................9
GXV3672_HD/FHD CAMERA......................................................................................................................9
GXV3672_HD/FHD SPECIFICATIONS........................................................................................................10
INSTALLATION GUIDE ............................................................................................................................. 11
MINIMUM RECOMMENDED COMPUTER SYSTEM REQUIREMENT.....................................................................11
CONFIGURE THE GXV3672_HD/FHD VIA WEB BROWSER ..........................................................................11
GXV3672_HD/FHD HOME WEB PAGE......................................................................................................14
GXV3672_HD/FHD CONFIGURATION &LANGUAGE PAGE..........................................................................15
BASIC SETTINGS EXPLANATION ...........................................................................................................16
SYSTEM SETTINGS PAGE ...........................................................................................................................16
VIDEO &AUDIO SETTING PAGE ..................................................................................................................17
CMOS SETTINGS PAGE.............................................................................................................................19
NETWORKING SETTING PAGE.....................................................................................................................20
DDNS SETTINGS PAGE .............................................................................................................................21
SIP SETTING PAGE....................................................................................................................................22
STATUS PAGE............................................................................................................................................24
ADVANCED SETTINGS EXPLANATION..................................................................................................25
USER MANAGEMENT PAGE.........................................................................................................................25
MAINTENANCE PAGE..................................................................................................................................26
SMTP SETTING PAGE (EMAIL ALARM)........................................................................................................27
FTP SETTINGS PAGE (UPLOAD ALARM)......................................................................................................28
ALARM SERVER SETTINGS PAGE (UPLOAD ALARM TO SUPPORTED VMS OR HTTP SERVER)........................29
MOTION DETECTION CONFIGURATION PAGE (SET ALARM)...........................................................................30
SYSLOG SETTINGS PAGE (TROUBLESHOOTING) ..........................................................................................32
SOFTWARE UPGRADE ................................................................................................................................33
SOFTWARE UPGRADE VIA TTFP, HTTP OR HTTPS....................................................................................33
INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE USING TFTPSERVER: ........................................................34
CONFIGURATION FILE DOWNLOAD ..............................................................................................................34
RESTORE FACTORY DEFAULT SETTING..............................................................................................35
RESET FROM WEB INTERFACE....................................................................................................................35
IP SURVEILLANCE FAQ ...........................................................................................................................36

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 3 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
TABLE OF FIGURES
GXV3672_HD/FHD USER MANUAL
FIGURE 1: HOME PAGE OF GXV3672_HD/FHD...........................................................................................................14
FIGURE 2: WEB LANGUAGE SWITCH .............................................................................................................................15
FIGURE 3: SYSTEM SETTINGS PAGE...............................................................................................................................16
FIGURE 4-1: VIDEO &AUDIO SETTINGS PAGE...............................................................................................................17
FIGURE 4-2: VIDEO &AUDIO SETTINGS PAGE...............................................................................................................18
FIGURE 5: CMOS SETTINGS PAGE.................................................................................................................................19
FIGURE 6: NETWORKING SETTING PAGE........................................................................................................................20
FIGURE 7: DDNS SETTING PAGE...................................................................................................................................21
FIGURE 8-1: SIP SETTING PAGE.....................................................................................................................................22
FIGURE 8-2: SIP SETTING PAGE.....................................................................................................................................23
FIGURE 9: STATUS PAGE................................................................................................................................................24
FIGURE 10: USER MANAGEMENT PAGE .........................................................................................................................25
FIGURE 11: MAINTENANCE PAGE ..................................................................................................................................26
FIGURE 12: SMTP SETTING PAGE .................................................................................................................................27
FIGURE 13: FTP SETTING PAGE.....................................................................................................................................28
FIGURE 14: ALARM HTTP SERVER SETTING PAGE .......................................................................................................29
FIGURE 15-1: MOTION DETECTION CONFIGURATION PAGE...........................................................................................30
FIGURE 15-2: MOTION DETECTION SCHEDULE CONFIGURATION PAGE.........................................................................31
FIGURE 16: ALARM SERVER SETTING PAGE..................................................................................................................32
FIGURE 17: FIRMWARE UPGRADE AND PROVISIONING ..................................................................................................33
FIGURE 18: FACTORY RESET FROM WEB INTERFACE ....................................................................................................35
TABLE OF TABLES
GXV3672_HD/FHD USER MANUAL
TABLE 1: GXV3672_HD/FHD TECHNICAL SPECIFICATIONS........................................................................................10

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 4 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
WELCOME
Thank you for purchasing Grandstream’s GXV3672_HD/FHD Outdoor Day/Night High Definition IP
Camera, an innovative powerful weatherproof infrared next generation network camera. Its advanced ISP
(Image Sensor Processor) powered with state-of-the-art auto-exposure/auto-white-balance algorithm and a
high quality lens, ensures high fidelity video quality that matches digital still camera color grade in a wide
range of light environments. It features cutting edge H.264 real-time video compression with excellent
image clarity (720p for GXV3672HD; 1080p for GXV3672_FHD) and color fidelity, industry leading
SIP/VoIP for video streaming to smartphones and video phones, integrated PoE, IR-CUT (mechanical) for
day or night mod, and advanced security protection using strong encryption. The GXV3672_HD/FHD can
be managed with GSurf_Pro, Grandstream’s intuitive FREE VMS (video management systems) software
that controls up to 36 cameras (*) simultaneously; or record video using GSNVR, Grandstream’s FREE
network and PC based DVR (digital video recorder) software. It is fully compliant with ONVIF standard
and offers flexible HTTP API and an SDK for advanced integration.
The GXV3672_HD/FHD Outdoor Day/Night IP camera is a new addition to the popular GXV3XXX series
IP surveillance product family. It ensures ease of use, integration and deployment, with multilingual
graphical user interface, provides powerful solution to professional surveillance applications in outdoor
environment.
This manual will help you to learn how to operate and manage your GXV3672_HD/FHD Outdoor
Day/Night HD IP camera and make the best use of it.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 5 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Safety Compliances
These instructions are intended to assist users with the operation of the GXV3672_HD/FHD and to instruct
on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution messages are
neglected.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 6 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Warranty
If you purchased your GXV3672_HD/FHD from a reseller, please contact the company where you
purchased the device for replacement, repair or refund.
If you purchased the product directly from Grandstream, please contact your Grandstream Sales and
Service Representative for a RMA (Return Materials Authorization) number before you return the product.
Grandstream reserves the right to remedy warranty policy without prior notification.
Caution:
Changes or modifications to this product not expressly approved by Grandstream, or operation of this
product in any way other than as detailed by this User Manual, could void your manufacturer warranty.
Please do not use a different power adaptor with the GXV3672_HD/FHD as it may cause damage to the
products and void the manufacturer warranty.
•This document is subject to change without notice. The latest electronic version of this user manual is
available for download at:
http://www.grandstream.com/products/surveillance/gxv3672hd/documents/gxv3672hd_fhd_usermanual_english.pdf
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose is not permitted without the express written permission of Grandstream Networks, Inc.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 7 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
CONNECT YOUR GXV3672_HD/FHD
Equipment Package Contents
The GXV3672_HD/FHD package contains:
•GXV3672_HD/FHD IP Camera
•12V DC Universal Power Adaptor
•Ethernet Cable
•Hex Key and 3 Screws and Wall Anchors
•Quick Installation Guide

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 8 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Connecting the GXV3672_HD/FHD
Using the Power Adapter as power supply
Connect the RJ-45 Ethernet cable to the NETWORK port of the GXV3672_HD/FHD
Connect the other end of the RJ-45 cable to your network (switch or router or PC)
Connect the power supply to the DC 12V power jack on the back of the GXV3672_HD/FHD
Using PoE as power supply
Connect the RJ-45 Ethernet cable to the NETWORK port of GXV3672_HD/FHD
Connect the other end of the RJ-45 cable to your PoE switch.
Please refer to following connection diagram to hook up the camera.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 9 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
PRODUCT OVERVIEW
GXV3672_HD/FHD Camera
1. Mounting Plate GXV3672_HD/FHD Mounting Plate
2. Top Shield Cover/Screw Top metal cover (shielding direct light and rain, etc.)
3. Adjustable Wire Shield Adjustable cylinder for wiring shield
4. Lens 1/3”CMOS (1.2M for HD/3.1M for FHD) and Lens
5. IR Light Array Infrared Light Array
6. Light Sensor for IR-Cut Light Sensor for mechanical IR-Cut switching

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 10 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
GXV3672_HD/FHD Specifications
Table 1: GXV3672_HD/FHD Technical Specifications
Model
GXV3672_HD
GXV3672_FHD
Video Compression
H.264, MJPEG
Image Sensor Resolution
1/3”, 1.2 Megapixel CMOS,
1280H x 960V
1/3”, 3.1 Megapixel CMOS,
2048H x 1536V
Image Sensor Sensitivity
Day & night mode, exceptionally low noise levels and low-
light sensitivity. Shutter: 1/10000 – 1/30 second
Focal Length
8mm
Aperture
F1.8
Field Angle (FOV)
46°(D) x 36°(H) x 26.5°(V)
IR Cut Filter
Yes, mechanical
Day & Night Mode
Infrared LED covering up to 30m
Minimum Illumination
0.05lux, 0 lux with IR LED on
Responsivity
5.48V/lux-sec (550nm)
1.9V/lux-sec (550nm)
Pixel Dynamic Range
Wide dynamic range of
120dB with SNRMAX 44dB
Wide dynamic range of
100dB with SNRMAX 39dB
Supported Maximum Video
Resolution and Frame Rate
1280x960 (30fps)
2048x1536 (15fps)
1920x1080 (30fps)
Video Bit Rate
32 Kbps ~ 8 Mbps, multi-rate for preview & recording
Embedded Analytics
Motion detection (up to 16 target areas)
Pre-/post-alarm Buffer
8MB
3MB
Snapshots
Triggered upon events, send via email/FTP
Network Protocol
TCP/UDP/IP, RTP/RTCP, RTSP, DHCP, DDNS, HTTP,
HTTPS, SMTP, FTP, NTP
SIP/VoIP Support
Yes
Power over Ethernet (PoE)
IEEE 802.3af class 0
External Cable Connection
Network: RJ45, 10M/100M auto-sensing
Video Output: RCA
Power Input
Dimensions (D x L)
94mm (D) x 230mm (L)
Weight
0.52kg
Temperature / Humidity
-20°C ~ +45°C (14°F ~ 113°F)
Humidity 10–90% RH (non–condensing)
Power Adapter
Output: 12VDC/1A; Input: 100–240VAC, 50–60Hz
Casing
IP66 compliant weather-proof metal case
Compliance
FCC Part 15, Subpart B Class B; CE EN 55022 Class B,
EN61000-3-2, EN 61000-3-3, EN55024, EN60950-1; C-tick
AS/NZS CISPR22, CISPR24; IP66

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 11 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
INSTALLATION GUIDE
Minimum Recommended Computer System Requirement
To install GXV3672_HD/FHD, you have to have a computer, PC recommend. The minimum
recommended PC system requirement listed below:
•Windows 2000, XP, Windows Vista, Windows 7 (32bit or 64bit)
•CPU: Intel Pentium 4 or higher, 2 GHz
•RAM: 1 GB (4 GB recommended for larger systems)
•Support for DirectX 8.0 and above.
Configure the GXV3672_HD/FHD via Web Browser
The GXV3672_HD/FHD has embedded Web server to respond to HTTP GET/POST requests. Embedded
HTML pages allow user to configure the IP camera through Microsoft Internet Explorer (7.0 or above, 32-
bit only) or Firefox (plug-in from Grandstream required).
•Download Active-X Control for IE(32bit) from Grandstream website:
http://www.grandstream.com/products/tools/surveillance/activex_control_manual_install_3.1.
0.32.rar
•Download Firefox Plug-in from Grandstream website:
http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe
NOTE:
Google Chrome and Apple Safari support is NOT yet supported and status pending.
Microsoft Internet Explorer 64-bit support is pending.
Please temporarily disable Antivirus or Internet Security Software when download and install the
Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 12 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Connect the Camera to network with DHCP server (Recommended)
The GXV3672_HD/FHD by default enabled as DHCP client, it will automatically get IP address from the
network with DHCP server running. User can know the IP address assigned to the camera from DHCP
server log or using “SearchTool” from Grandstream GSurf_Pro free VMS software.
1. Download and install the GSurf_Pro software from Grandstream website:
http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip
2. Run the “Search Tool” in the pull down Menu of “Manage Tool” tag
3. Click on button to begin device detection
4. The detected devices will appear in the Output field like below
5. Double click the column of the detected camera, the browser will automatically open and link to the
device IP and the web configuration page.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
start to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user name and password to access the Web Configuration Interface, the default
user name and password are both set to admin.
9. In step 6, IE will indicate that “This website wants to install the following add-on: GSViewerX.cab
from Grandstream Networks Inc.”, allow the installation.
10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here:
11. http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install the
Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 13 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Connect to the Camera using Static IP
If no DHCP server in the network, or the camera does not get IP from DHCP server, user can connect the
camera to a computer directly, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168
1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera GXV3672_HD/FHD.
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and configure
the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like below:
3. Power on the GXV3672_HD/FHD.
4. Start the IE or Firefox browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
start to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user name and password to access the Web Configuration Interface, the default
user name and password are both set to admin.
9. In step 6, IE will indicate that “This website wants to install the following add-on: GSViewerX.cab
from Grandstream Networks Inc.”, allow the installation.
10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here:
11. http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install the
Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 14 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
GXV3672_HD/FHD Home Web Page
The Home Page of GXV3672_HD/FHD shown as Figure 1:
Figure 1: Home Page of GXV3672_HD/FHD
1. Control Console: PTZ Console controller for ePTZ function.
2. ZOOM: Zoom in or Zoom out during ePTZ operation.
3. FOCUS: Adjust the focus of image (Not Applicable to GXV3672_HD/FHD).
4. PTZ SPEED/Default Button: Adjust the rotate speed of the control console (Not Applicable);
“D” “Default Button” to reset the video brightness, contrast and saturation
value from (auto or manual) adjusted value to factory default value.
5. BRIGHTNESS: Adjust the image brightness (will automatic save it unless readjusted)
6. CONTRAST: Adjust the image contrast. (Same as above, auto save adjusted value)
7. SATURATION: Adjust the image saturation. (Same as above)
8. View Size:Pull down to select between “Window Size” or “Real Size” to display
the embedded video stream at configured video resolution.
9. Configuration Click to enter “Configuration Page” to configure the parameters of
GXV3672_HD/FHD (Administration privilege required).
10. Language: Click to switch webpage language.
(Current supported: Chinese, English and Russian)
11. Play/Stop: Start/Stop playing the video stream at embedded webpage.
12. Snapshot: Click to capture and save a snapshot of current video frame displayed.
Default directory: C:\Capture
13. Record: Click to Start/Stop record of current video stream into a file.
Default directory: C:\Record
14. Playback:Playback recorded video files
15. Path of File Saved:Click to change the path of record/snapshot file saved.
16. Motion Detection Alarm Indicator: If motion detection alarm triggered, the indicator will flash in red.
Click the indicator icon to turn off the alarm indication.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 15 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
GXV3672_HD/FHD Configuration & Language Page
•When click the “Configuration” tab, web page will link to page to configure the related parameters of
the GXV3672_HD/FHD.
•There are two big categories of settings: Basic Settings and Advanced Settings. Details will be
illustrated in the later Chapter.
•When click the “Language” tab, supported languages will be displayed in Figure 2. Click to select the
related webpage display language.
Figure 2: Web Language Switch
•Currently firmware only support: English (default), Simplified Chinese and Russian.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 16 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
BASIC SETTINGS EXPLANATION
System Settings Page
This page allow user to configure the system settings of GXV3672_HD/FHD.
Figure 3: System Settings Page
•Current System Time: Display time current system is running at
•Set the System Time: Configure the time system is running.
oTime Zone: Select from pull down menu the time zone unit located
oSelf-Defined Time Zone: Use the self-defined time zone for automatic daylight saving time
adjustment. Format please refer to the “help over mouse”
oUpdate via NTP Server: Synchronize time using NTP protocol with a Time Server
over the Internet cloud (*)
oSynchronize with
Local Computer: Synchronize time with local computer
oSet the Time Manually: Manually input the time
oKeep Current D/T: Select to use camera current displayed time
•OSD Date Format: Pull down to select date format displayed on video screen
oDevice Name: The name of device which will be shown in the result of
“Search Tool” of GSurf_Pro VMS program.
•Expansion Port Mode Select: The setting for external expansion interface module
NOTE:
(*) If select this option, a valid DNS server must be preconfigured under Basic Settings

Networking
button has to be clicked to save all the changes made to the device.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 17 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Video & Audio Setting Page
This page allows user to configure the video and audio related settings.
Figure 4-1: Video & Audio Settings Page
•On Screen Display (OSD):Display time stamp and text on the video screen.
oOSD Text: Inputted text (to identify the camera) shown on the screen.
oOSD Position: Show the OSD in either top or bottom position on screen.
oDisplay Time: When checked, time stamp will display on video screen
oDisplay Text: When checked, inputted text will display on video screen.
•Audio Settings: Pull down to disable due to no microphone in this camera.
oMicrophone Volume: Slide to adjust microphone gain.
oSpeaker Volume: Slide to adjust the built-in speaker volume.
•Power Frequency: Select correct local power frequency to avoid video flicking effect under
fluorescence light condition. Default is Outdoor.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 18 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Figure 4-2: Video & Audio Settings Page
•Primary Stream Settings:
oPreferred Video Codec: MJPEG and H.264 supported, H.264 recommended.
oResolution: The video resolution in pixels used in video of camera
oBit Rate: video bit rate used
oMaximum Frame Rate: Maximum frame rate used. More data if big frame used
oBit Rate Control: Constantly bit rate, or variable bit rate
oImage Quality: Image quality used when Variable Bit Rate used
oI-frame Interval: I-frame interval
•Secondary Stream Settings: Pull down to select, same as Primary steam..
NOTE:
H.264 suggested if camera needs to be viewed via Internet.
If MJPEG selected, reduce max. frame rate to min. value to save bandwidth and get better image
Grandstream IP Camera provides two video streams, user can use them with flexibility. For example,
the high-resolution stream for local recording; another low or high resolution for remote monitoring; or
vice versa depending application scenarios.
Use below link to calculate bandwidth and storage before installation
http://www.grandstream.com/support/tools/bandwidth-storage-calc

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 19 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
CMOS Settings Page
This page allows user to adjust the CMOS parameters:
Figure 5: CMOS Settings Page
•Flip: Check this will allow video flip 180° vertically in horizontal axis.
•Shutter Speed: Camera Shutter Speed. There are 10 options, with Auto, 1/30, 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000, 1/5000 and 1/10000
•IR CUT Setting: Manual or Automatic (IR Sensor or Algorithm controlled mechanical IR CUT)
•IR CUT Sensitivity:Sensitivity of IR CUT be trigged, 5 lever total
•Color Mode: Camera Color Mode. There are three options: Color; Black/White; Auto.
NOTE:
Auto option recommended for Shutter Speed, IR CUT Setting and Color Mode.

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 20 of 39
Firmware Version 1.0.1.71 Last Updated: 2/2013
Networking Setting Page
This page allows user to configure network related parameters:
Figure 6: Networking Setting Page
•IP Address Configuration: Camera IP address configuration
oDynamically Associated via DHCP: Default setting, DHCP server assign IP to camera.
oStatically Configured as: Static IP address configuration
•DNS Configuration: DNS server IP, must be configured correctly if using static IP.
•HTTP: Web access TCP port, default 80.
NOTE:
If camera behind SOHO router with port forwarding configuration for remote access, static IP or
static DHCP has to be used to avoid IP address change after router reboot.
TCP port above 5000 suggested if port forwarding HTTP remote access, due to some ISP would
block port 80 inbound traffic. For example, change the default HTTP port from 80 to 8088, to
make sure the port forwarding not likely be blocked.
In addition to HTTP port, RTSP port also required to be configured for port forwarding, in order
for remote party viewing the H.264 video.
If change the default port from TCP 80 to port “A”, then RTSP port should be “2000+A”. Both
TCP port “A” and “2000+A” should be configured for port forwarding in the router. For
example, the HTTP port changed to 8088, the RTSP port should be 10088, both 8088 and 10088
should be configured for port forwarding in order for remote camera video access.